Is Your Saturn Outlook Plagued by Electrical Gremlins?
Are you dealing with flickering lights, power windows with a mind of their own, or a security system that randomly acts up? These frustrating and unpredictable issues often point to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, managing everything from your interior lights and power locks to your instrument cluster and climate control. When it starts to fail, it can create a cascade of bizarre electrical problems that are difficult to diagnose.
This isn’t just a replacement part; it’s a complete, pre-programmed solution designed to restore your vehicle’s functionality and your peace of mind. We take the guesswork and dealership hassle out of the equation. Simply provide us with your vehicle’s VIN during checkout, and we will program this module with the latest official GM software specific to your Saturn Outlook. This ensures seamless integration and proper function right out of the box, saving you from expensive programming fees and additional trips to the mechanic.
From the Diagnostic Bay
We recently had a 2009 GMC Acadia (which uses this exact BCM) come into the shop with a truly baffling set of symptoms. The driver reported that the radio would randomly shut off, the liftgate would refuse to open, and the dome lights would stay on, draining the battery overnight. They had already replaced the battery and checked every fuse they could find. After hooking up our diagnostic scanner, we saw a flood of communication errors pointing towards the BCM. Instead of a lengthy repair, we installed a VIN-programmed module just like this one. In under an hour, all the strange electrical issues were gone. It’s a powerful reminder of how critical this single component is to the vehicle’s entire electronic ecosystem.
Common Symptoms of a Failing BCM
- ✔ Power windows, mirrors, or door locks operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or failing to turn on.
- ✔ The vehicle’s security system engaging randomly, preventing the car from starting.
- ✔ Instrument panel gauges behaving strangely or providing incorrect readings.
- ✔ Climate control functions becoming unresponsive.
- ✔ The radio or infotainment system malfunctioning.
- ✔ A persistent battery drain with no other obvious cause.
The Definitive Solution: A Programmed 2007-2010 Outlook BCM
Don’t settle for a used module from a salvage yard that will require costly programming and may not even be compatible. Our process is simple and effective. We ensure that the 2007-2010 Outlook BCM you receive is loaded with the correct software for your exact vehicle configuration. This direct-fit module is built to meet or exceed original equipment specifications, providing a reliable and long-lasting repair for your vehicle’s electrical systems.
Installation and Required Procedures
Physical installation is typically straightforward, involving disconnecting the battery and swapping the old module with the new one. However, after installation, some vehicles may require additional electronic relearn procedures to ensure all systems communicate correctly. These may include:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional-grade scan tool. This syncs the new BCM with the airbag system. This is only necessary if the light is on.
- Brake Pedal Position Relearn: Some models may require a recalibration of the brake pedal position sensor to ensure proper operation of the brake lights and traction control system.
Please note: Specific procedures can vary. We always recommend consulting a factory service manual or a qualified automotive technician for guidance.
Guaranteed Fitment for a Wide Range of GM Vehicles
This Body Control Module is a direct replacement for a vast array of GM vehicles and part numbers. Please verify that your original part number is on this list to ensure compatibility.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
Why do I need to provide my VIN?
Your Vehicle Identification Number (VIN) allows us to flash the BCM with the exact software and calibrations for your vehicle’s specific options and features. This step is crucial for a true plug-and-play installation and prevents compatibility issues.
Is this part difficult to install?
The physical replacement of the BCM is generally simple for someone with basic mechanical skills. It’s typically located under the dash and involves unplugging a few connectors. However, as noted above, some post-installation electronic procedures may be required, which may necessitate a professional scan tool.
What happens if my airbag light comes on after installation?
This is a common occurrence. It means the new BCM needs to be electronically introduced to the vehicle’s Supplemental Restraint System (SRS). A qualified technician with a high-level scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
Will this fix my specific electrical problem?
This module will correct issues directly caused by a faulty BCM. The symptoms listed above are strong indicators of BCM failure. However, we always recommend proper vehicle diagnosis to rule out other potential causes like bad wiring, grounds, or switches before ordering.
Do I need to return my old BCM?
No. This product has no core charge. You can keep your original module without any extra fees or hassle.