Is Your Saturn Outlook Experiencing Baffling Electrical Problems?
If your 2007-2010 Saturn Outlook is acting possessed, with flickering lights, malfunctioning power accessories, or random warning messages, a failing Body Control Module (BCM) is the most likely culprit. The BCM is the central computer for your vehicle’s body electronics, managing everything from your power windows and locks to the interior lights and security system. When it fails, it can cause a cascade of frustrating and seemingly unrelated issues.
From the Diagnostic Bay
We had a customer with a 2009 Acadia (which shares this BCM) who was convinced his power door lock actuators were all failing at once. He’d replaced one, only to have another stop working. The real issue wasn’t the individual motors, but the BCM that was failing to send the correct signals. After installing one of our pre-programmed modules, all his locks, windows, and interior lights started working perfectly again. It saved him hundreds in unnecessary parts and labor.
Common Symptoms of a Failing BCM:
- ✔ Power windows, mirrors, or door locks working intermittently or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The security system engaging randomly or the vehicle not starting due to a security fault.
- ✔ False warnings on the dashboard, such as ‘Service Airbag’ or ‘Service StabiliTrak’.
- ✔ Key fobs that stop working.
- ✔ Unpredictable behavior from the radio or climate control system.
The Direct-Fit, Programmed Solution
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take a genuine OEM BCM and program it specifically for your vehicle using your VIN. This process ensures the module has the latest software updates from GM, often resolving issues that the original factory software had. By providing us with your VIN after purchase, you receive a 2007-2010 Outlook BCM that is truly plug-and-play, eliminating the need for an expensive trip to the dealership for programming.
Important Post-Installation Information
While this module is programmed for your VIN, certain vehicle systems may require a ‘handshake’ procedure after installation. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a simple ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional-grade scan tool. This syncs the new BCM with your vehicle’s existing airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician if you are unsure about these procedures.
Guaranteed Fitment
This Body Control Module is a direct replacement for a wide range of GM vehicles. Please verify your original part number against the list below to ensure compatibility.
Compatible Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No. We handle all the programming for you before shipment. Simply provide us with your vehicle’s 17-digit VIN after you place your order, and the module will arrive ready for installation.
How do I find my original BCM part number?
The part number is printed on a sticker on the case of your original BCM. The location varies, but it’s often found in the center dash or under the steering column.
What is a VIN? Where can I find it?
The VIN is your car’s 17-digit Vehicle Identification Number. You can find it on your vehicle’s registration, insurance card, or on a plate on the driver’s side of the dashboard visible through the windshield.
What if my airbag light comes on after I install the BCM?
This is a normal security measure. The BCM needs to be synced with the airbag module (SDM). This requires a ‘Setup SDM Primary Key in BCM’ procedure, which can be done by a repair shop with a professional diagnostic tool.
Is there a core charge for my old part?
No, there is no core charge. You can keep your original module.