Is Your Saturn Outlook Experiencing Bizarre Electrical Problems?
If your 2007-2010 Saturn Outlook is acting possessed—with flickering lights, malfunctioning power windows or locks, strange warning messages on the dash, or a battery that drains for no reason—a failing Body Control Module (BCM) is the most likely culprit. The BCM is the central computer for your vehicle’s comfort and convenience features. When it fails, it can cause a cascade of frustrating and seemingly unrelated issues. This replacement Body Control Module, part number 15819552, is the definitive solution to restore your vehicle’s electronic systems to perfect working order.
From the Diagnostic Bay
We had a 2008 Saturn Outlook come into the shop that was giving its owner headaches. The interior lights would stay on, draining the battery overnight, and the remote keyless entry worked only intermittently. The owner had already replaced the battery twice. After hooking up our diagnostic scanner, we saw multiple communication fault codes pointing to the BCM. Instead of a complex and costly rewiring job, the solution was a new, properly programmed BCM. Once we installed this VIN-matched module, all the strange electrical gremlins vanished. The vehicle was back to normal, and the owner was relieved to have a reliable car again.
Solving Issues with a Programmed 2007-2010 Outlook BCM
Don’t settle for a generic, unprogrammed module that will require an expensive trip to the dealership. We take the hassle out of the repair. Simply provide us with your vehicle’s VIN during checkout, and our experts will program this module with the latest GM software specific to your Outlook. This ensures that it works seamlessly with your vehicle’s existing systems right out of the box, making installation straightforward for you or your mechanic.
Common Symptoms of a Failing BCM
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The security system or alarm malfunctioning or engaging randomly.
- ✔ False warning lights appearing on the instrument cluster (e.g., “Service StabiliTrak”).
- ✔ Intermittent starting problems or no-start conditions.
- ✔ Communication errors with other vehicle modules (DTC U-codes).
- ✔ Remote keyless entry (RKE) not functioning correctly.
Installation and Post-Install Notes
While this module is designed for a direct fit, some vehicles may require simple relearn procedures after installation. This is a normal part of the process. Specifically, a Brake Pedal Position Relearn might be needed for proper brake light and traction control function. Additionally, if the airbag light is illuminated after install, a professional scan tool is required to perform the “Setup SDM Primary Key in BCM” procedure to sync the modules. This part is a direct replacement for a wide range of part numbers, including: 10382479, 15093910, 15276271, 15299986, 15828601, 15837419, 15872388, 20815898, 22860591, 25892622, and many more.
By purchasing this pre-programmed 2007-2010 Outlook BCM, you are getting a reliable, fully updated component that solves the root cause of your electrical issues, saving you time, money, and diagnostic frustration.
Frequently Asked Questions
What does the Body Control Module (BCM) do on my Saturn Outlook?
The BCM acts as the central computer for your vehicle’s body electronics. It controls features like power windows, locks, interior/exterior lighting, security system, wipers, and communicates with other modules in the car.
Do I need to get this module programmed by a dealer?
No. We handle the programming for you before we ship the part. Just provide your vehicle’s 17-digit VIN when you order, and it will arrive ready for installation.
Where is the BCM located on a 2007-2010 Saturn Outlook?
The BCM on the Saturn Outlook is typically located in the center dash area, often behind or near the glove box or radio. Always consult a service manual for the exact location and removal procedure.
What if my airbag light is on after I install the new BCM?
If the airbag light is on, the vehicle needs an ‘Airbag System Sync’ (Setup SDM Primary Key in BCM) procedure. This requires a professional-grade diagnostic tool to sync the new BCM with the airbag system.
Is this a plug-and-play installation?
It is largely plug-and-play because we program it to your VIN. However, as with many modern electronic repairs, some models may require a simple ‘relearn’ procedure for things like the brake pedal position sensor to ensure full functionality.
Do I need to send my old BCM back?
No, there is no core charge for this part. You can keep your original module.