2007-2010 Patriot Engine Computer 68070011AA Programmed to Your VIN

Restore Your Patriot’s Performance

Fix stalling, rough idle, and check engine lights with this fully programmed Engine Control Module for 2007-2010 Jeep Patriot, Compass, and Caliber models. It arrives flashed to your VIN for a simple, plug-and-play installation with no dealer visit required. Get back on the road fast – order today!

$159.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



SKU: 590-01761-71 Categories: ,
Guaranteed Safe Checkout

Is Your Jeep Patriot Running Rough, Stalling, or Showing a Check Engine Light?

If you’re dealing with frustrating and unpredictable engine problems in your 2007-2010 Jeep Patriot, a failing Engine Control Module (ECM) is a very common cause. Over my 20+ years in the garage, I’ve seen these modules cause everything from a simple check engine light to a vehicle that refuses to start. Symptoms often start small and get progressively worse, leaving you stranded. Don’t let a faulty computer dictate when and where you can drive.

The Direct Solution: A Pre-Programmed Engine Computer

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take all the guesswork and extra cost out of the repair. When you order, we flash the module with your vehicle’s specific VIN and current mileage. The result? A true plug-and-play component that restores your vehicle’s original performance and functionality without requiring a trip to the dealership for expensive programming.

Expert Pro Tip: Check Your Connectors First!

Before you even unbolt the old ECM, take a close look at the wiring harness connectors that plug into it. On these Patriot, Compass, and Caliber models, the connectors are exposed to the elements under the hood. I’ve seen countless cases where green or white corrosion on the pins caused the exact same symptoms as a bad module. A quick spray with a quality electronics cleaner and a gentle scrub with a small brush can sometimes solve the problem or, at the very least, ensure your new module has a perfect connection.

Why Choose Our 2007-2010 Patriot Engine Computer?

Getting your Jeep back to factory-spec operation is our top priority. This module is the brain of your engine, and getting it right is critical for performance, fuel economy, and emissions.

  • โœ” No Additional Programming Needed: We handle all the software flashing before it ships. It arrives at your door ready for installation.
  • โœ” Guaranteed Compatibility: This unit is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle.
  • โœ” Fixes Common Issues: Solves problems like random stalling, rough idle, communication error codes (U-codes), false sensor readings, and no-start conditions.
  • โœ” Cost-Effective Repair: Avoid the high labor costs and programming fees charged by dealerships and many local shops.

Plug-and-Play Installation: No Dealer Visit Required

You can perform this repair right in your own driveway with basic hand tools. The process is straightforward and designed for the DIY mechanic.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes for the system capacitors to discharge.
  2. Locate the ECM: On the 2007-2010 Patriot, the ECM is typically located in the engine bay, mounted to the firewall or inner fender.
  3. Disconnect the Harness: Carefully release the locking tabs on the electrical connectors and pull them straight out from the module. Do not force them.
  4. Remove the Old Module: Unbolt the old ECM from its mounting bracket.
  5. Install the New Module: Mount your new, pre-programmed ECM in place and securely tighten the bolts.
  6. Reconnect and Secure: Plug the wiring harnesses back into the new module until they click, and ensure the locking tabs are engaged. Reconnect your battery terminal.
  7. Final Check: Start the vehicle. It may run slightly rough for the first few seconds as the systems recalibrate. The check engine light should be off, and the engine should run smoothly.

Guaranteed Fitment for Your Vehicle

This engine computer is engineered to work seamlessly with several Chrysler platform vehicles. Please verify your make, model, and year below to ensure proper fitment.

  • Jeep Patriot: 2007, 2008, 2009, 2010
  • Jeep Compass: 2007, 2008, 2009, 2010
  • Dodge Caliber: 2007-2008 (All Engines)
  • Dodge Caliber: 2009 (1.8L, 2.0L Gasoline, 2.4L with engine opt ED3)
  • Dodge Caliber: 2010 (2.0L, 2.4L)

This module replaces the following part numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, 68044228AA and more. If your part number is on this list, this is the correct part for you.

Condition

Refurbished

Genuine OEM

Yes

MPN

68070011aa

Interchange part number

PartNumber

590

Model

PATRIOT

Year

2007

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top