2007-2010 Patriot Engine Computer 04692101AE | Programmed to Your VIN

Get Your Patriot Running Right Again!

Restore your vehicle’s performance with this plug-and-play Engine Computer for 2007-2010 Jeep Patriot, Compass, and Dodge Caliber models. It arrives programmed to your VIN and mileage, eliminating the need for a dealer visit. Fix stalling, no-start issues, and clear that check engine light for good. Order today and get back on the road fast!

$159.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



SKU: 590-01761-8 Categories: ,
Guaranteed Safe Checkout

Is Your Jeep Patriot Stalling, Sputtering, or Refusing to Start?

As a mechanic with over two decades of experience under the hood, I’ve seen it all. A 2007-2010 Jeep Patriot, Compass, or Dodge Caliber that suddenly develops a mind of its own is a common sight in my shop. You might be dealing with a persistent Check Engine Light, unpredictable stalling at intersections, rough idling, or a complete no-start condition that leaves you stranded. These aren’t just annoyances; they’re signs that the very brain of your vehicleโ€”the Engine Control Module (ECM)โ€”may be failing.

Common Symptoms of a Failing ECM:

  • โœ” Persistent and unexplained Check Engine Light (CEL).
  • โœ” Vehicle randomly stalling or shutting off while driving.
  • โœ” Difficulty starting the engine or a complete no-start situation.
  • โœ” Noticeable drop in fuel economy.
  • โœ” Rough or erratic engine performance and poor acceleration.
  • โœ” Communication errors with diagnostic scan tools.

The Hassle-Free Solution: A Pre-Programmed 2007-2010 Patriot Engine Computer

Forget expensive dealership visits and the headache of finding a specialist to program a new module. This replacement Engine Computer, part number 04692101AE, is the straightforward, reliable fix you’ve been looking for. We take care of the complex part for you. Before we ship it, we professionally program the module with your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. The result? A true plug-and-play component that is ready for installation the moment it arrives at your door. No extra fees, no programming tools, no trips to the dealer.

A Mechanic’s Real-World Story

“A customer’s 2009 Patriot came in last week with a classic no-start condition. The previous shop quoted them for a new ECM. Before swapping the part, I did my due diligence. I always check the basics first. I found the main engine-to-chassis ground strap near the passenger side motor mount was badly corrodedโ€”a very common issue on these platforms. After cleaning the contact points and re-securing the strap, the Jeep fired right up. While a faulty ECM is a frequent culprit, always take 5 minutes to inspect your main battery and engine ground connections for corrosion or looseness. It can save you from replacing a perfectly good part.”

Plug-and-Play Installation: No Dealer Visit Required

Installing your new ECM is a job most DIYers can handle in their own driveway. Follow these simple steps to get your vehicle back in top shape:

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes for the system capacitors to discharge.
  2. Locate the ECM: On the Jeep Patriot, Compass, and Dodge Caliber, the Engine Control Module is typically located in the engine bay, often mounted to the firewall or inner fender.
  3. Disconnect the Connectors: Carefully unclip the wiring harness connectors from the old module. Inspect the pins and connectors for any signs of corrosion or damage. Clean them with an electrical contact cleaner if necessary.
  4. Remove the Old Module: Unbolt the old ECM from its mounting bracket and set it aside.
  5. Install the New Module: Mount your new, pre-programmed ECM in place and secure the bolts.
  6. Reconnect Everything: Firmly plug the wiring harnesses back into the new module until they click. Reconnect your negative battery terminal.
  7. Final Step: Start the vehicle and let it run for a few minutes. Your Patriot is now ready to drive, with its performance and reliability restored.

Guaranteed Compatibility

This module is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle. It is compatible with part numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, and 68044228AA.

It is designed to fit the following vehicles:

  • 2007-2010 Jeep Patriot
  • 2007-2010 Jeep Compass
  • 2007-2008 Dodge Caliber (All Engines)
  • 2009 Dodge Caliber (1.8L, 2.0L Gasoline, 2.4L with engine opt ED3)
  • 2010 Dodge Caliber (2.0L, 2.4L)
Condition

Refurbished

Genuine OEM

Yes

MPN

04692101ae

Interchange part number

PartNumber

590

Model

PATRIOT

Year

2007

Brand

Chrysler

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top