Is Your Saturn Outlook Acting Possessed?
Are you dealing with flickering dashboard lights, power windows with a mind of their own, or a battery that’s dead every morning? Before you blame a ghost in the machine, the culprit is likely a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s comfort and convenience features. When it fails, it can cause a cascade of frustrating and seemingly unrelated electrical problems. In my 20+ years in the shop, I’ve seen these exact issues hundreds of times on GM vehicles of this era.
A Real-World Diagnosis
“A customer’s 2008 Outlook came in last week with a persistent battery drain. They had already replaced the battery and alternator, but the problem continued. After a quick diagnostic, we found the BCM wasn’t entering ‘sleep mode’ after the ignition was off, slowly draining the battery overnight. A new, properly programmed BCM solved the issue completely. This is a classic failure mode for these modules.”
The Direct Solution: A VIN-Programmed BCM
Don’t waste time and money on a trip to the dealership. This is a direct replacement 2007–2010 Outlook Body Control Module that arrives at your door programmed and ready for installation. We use your vehicle’s VIN to load the latest GM software, ensuring it communicates perfectly with your Outlook’s existing systems right out of the box. This eliminates the need for expensive dealer-only programming tools.
Common Symptoms of a Failing BCM:
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic interior or exterior lights (flickering, staying on, or not turning on).
- ✔ The security system acting up or preventing the car from starting.
- ✔ Unexplained parasitic battery drain that kills your battery overnight.
- ✔ Dashboard warning lights that have no apparent cause.
- ✔ Radio or climate control systems functioning incorrectly.
Installation and Post-Install Procedures
Installing your new 2007–2010 Outlook Body Control Module is straightforward. For the Saturn Outlook, the BCM is typically located in the center dash area.
- Safety First: Always disconnect the negative battery terminal before beginning any electrical work.
- Locate the BCM: Access the module in the center dash. This may require removing some trim panels.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Unbolt the module and remove it.
- Install the New BCM: Mount the new module in place and securely reconnect all electrical connectors.
- Reconnect Battery: Reattach the negative battery terminal.
CRITICAL: Post-Installation Steps Required
Simply swapping the module is not the final step. To ensure 100% functionality and safety, the following procedures MUST be performed with a professional-grade diagnostic scan tool. This is not optional.
- Airbag System Reset: You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This synchronizes the new BCM with the airbag system (Sensing and Diagnostic Module). Failure to do this will leave the airbag warning light on, and the system may not function correctly in an accident.
- Brake Pedal Position Sensor Relearn: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated after BCM replacement. This is vital for the proper operation of the brake lights, cruise control, and stability control systems.
Guaranteed Compatibility
This module is a direct replacement for part number 25910474 and is also interchangeable with the following part numbers, ensuring a perfect fit for your vehicle:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25934762, 25934763, 95151084
This BCM fits a wide range of GM vehicles. Please verify your vehicle is on the list below: