Restore Full Control of Your Saturn’s Electronics
Are you dealing with bizarre electrical gremlins in your 2007-2010 Saturn Outlook? Flickering interior lights, power windows with a mind of their own, or a security system that prevents your vehicle from starting can be incredibly frustrating. These aren’t random glitches; they’re classic signs of a failing Body Control Module (BCM). As the central command center for your vehicle’s comfort and convenience features, a faulty BCM can disrupt your daily drive. This direct-fit replacement BCM is the reliable, long-term solution to restore order and get your Outlook operating exactly as it should.
Case Study: A Tricky Diagnosis
A customer brought in their 2008 Saturn Outlook with a laundry list of complaints: the radio would randomly turn off, the driver’s side power window wouldn’t work, and the anti-theft light was flashing intermittently, sometimes causing a no-start condition. They had already replaced the battery and checked fuses with no luck. After connecting my diagnostic scanner, I saw multiple communication loss codes with various modules. In my 20+ years of experience, this pattern almost always points to the BCM. It’s the hub that allows all these components to talk to each other. Once we installed a new, VIN-programmed BCM like this one, every single one of the customer’s issues was resolved instantly. It’s a perfect example of how one part can solve a dozen confusing problems.
Is Your Outlook Showing These Symptoms?
A failing BCM can cause a wide range of issues that might seem unrelated. If you’re experiencing any of the following, your BCM is the likely culprit:
- ✔ Erratic power window or door lock operation
- ✔ Interior or exterior lights not working correctly or staying on
- ✔ The security system light is on, or the vehicle won’t start
- ✔ Dashboard warning lights appearing randomly
- ✔ Key fob not responding
- ✔ Wipers or climate control acting unpredictably
A Straightforward Guide to Installation
Replacing the BCM in your Saturn Outlook is a manageable job for a confident DIYer. This module is located in the center dash area. Follow these steps for a successful installation.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Access the BCM: You will need to remove the necessary dash trim panels around the center console and radio to gain access to the module. Keep your screws and clips organized.
- Locate and Remove: Identify the old BCM. It’s a small black box with several large electrical connectors. Carefully disconnect all wiring harnesses by pressing their release tabs.
- Install the New Module: Mount your new, pre-programmed BCM in the same location. Securely reconnect all wiring harnesses, ensuring each one clicks firmly into place.
- Perform Post-Installation Procedures: Reconnect the battery. You must now perform the necessary relearn procedures. This is a critical step.
Important: Post-Installation Relearn Required
After installing your new BCM, two key procedures are often required to ensure all systems function correctly and safely. A professional-grade scan tool is typically needed for these steps.
- Airbag System Reset: To clear the airbag warning light, you must perform the ‘Setup SDM Primary Key in BCM’ procedure. This re-establishes communication between the BCM and the airbag system’s Sensing and Diagnostic Module (SDM).
- Brake Pedal Position Sensor Calibration: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated. This ensures the brake lights and stability control system receive accurate input from the pedal.
Verified Vehicle Compatibility
This Body Control Module is a direct replacement for part number 15921352 and is compatible with a wide range of GM vehicles. We program it specifically for your 2007–2010 Saturn OUTLOOK using your VIN. It also interchanges with the following part numbers:
Interchangeable Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
This part will also fit these makes and models with these options:
Frequently Asked Questions
Do I need to program this BCM?
No! That’s the best part. We program the module to your vehicle’s specific VIN before we ship it. This saves you a costly trip to the dealership. Just provide your VIN at checkout.
Where is the BCM located on my 2007-2010 Saturn Outlook?
The Body Control Module on the Saturn Outlook is typically located in the center dash area, often behind or near the radio and climate controls.
What is a VIN and why do you need it?
The VIN is your vehicle’s unique 17-digit identification number. We use it to load the correct factory software and settings for your Outlook’s specific options, ensuring a perfect plug-and-play installation.
Will this fix my car’s security light and no-start problem?
Yes, in many cases, a faulty BCM is the root cause of security system issues, including a flashing anti-theft light and the engine refusing to start. This replacement BCM is designed to resolve those communication errors.
What tools do I need for the post-installation procedures?
The airbag system reset and brake pedal calibration typically require a bi-directional diagnostic scan tool, such as a Tech 2 or a comparable high-end professional scanner. Many local repair shops can perform these procedures for you if you don’t have the tool.