2007-2010 Outlook BCM 15837419 | Pre-Programmed with Cloning Service

End Your Outlook’s Electrical Gremlins

Tired of flickering lights, dead power windows, or random security alerts in your Saturn Outlook? This Body Control Module (BCM), delivered with our hassle-free cloning service, is your plug-and-play solution. We transfer your vehicle’s data to this unit, so you can skip the expensive dealer programming. Restore your vehicle’s electronic functions with confidence. Order today and get your Outlook working properly again!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-500 Categories: ,
Guaranteed Safe Checkout

Restore Your Saturn Outlook’s Electrical System

If you’re dealing with bizarre and frustrating electrical problems in your 2007-2010 Saturn Outlook, a failing Body Control Module (BCM) is often the culprit. As the central command center for your vehicle’s body electronics—controlling everything from power windows and door locks to interior lighting and the security system—its failure can create a cascade of issues. This isn’t just an inconvenience; it can affect your vehicle’s security and daily usability. This replacement BCM, part number 15837419, is the definitive solution to get your Outlook operating correctly again.

Case Study: A Tricky Diagnosis

I remember a 2009 Saturn Outlook that came into my shop with a laundry list of complaints from the owner. The radio would turn on and off by itself, the driver’s side power window worked intermittently, and the anti-theft light would flash randomly, sometimes preventing the car from starting. Standard diagnostics showed a flurry of communication error codes (U-codes). After checking the main wiring harnesses for damage, we focused on the BCM. On these Lambda-platform SUVs (Acadia, Enclave, Traverse, Outlook), water intrusion from a clogged sunroof drain or a leaky windshield seal can seep down and damage the BCM. Replacing it with our cloned module solved every single one of the owner’s issues instantly, without a costly trip to the dealer for programming.

Is Your Outlook Showing These Symptoms?

A faulty BCM can manifest in numerous ways. Over my 20+ years in diagnostics, I’ve seen these modules cause some of the most confusing problems. Look out for these common signs of failure:

  • ✔ Power windows, door locks, or mirrors not working or acting erratically.
  • ✔ Interior or exterior lights flickering, staying on, or not turning on at all.
  • ✔ The security system engaging randomly, causing a no-start condition.
  • ✔ Inconsistent or non-functional remote keyless entry.
  • ✔ Warning lights on the dashboard (like the airbag or service vehicle light) appearing without a clear cause.
  • ✔ Diagnostic trouble codes (DTCs) related to communication, such as U0140 (Lost Communication With Body Control Module).

The Power of Our Cloning Service

The biggest headache with replacing a BCM is the need for expensive, dealer-only programming. Our unique cloning service eliminates this step entirely. Here’s how it works: you send us your original, faulty BCM. We then transfer its specific vehicle data—including VIN, mileage, and key information—directly onto this replacement unit. We ship both your original module and the ready-to-install replacement back to you. The result is a true plug-and-play solution. You can install it yourself and get back on the road without any additional programming fees or hassle. This is the most efficient and cost-effective way to replace a failed 2007-2010 Outlook BCM.

A Straightforward Guide to Installation

For the handy DIYer, swapping the BCM is a manageable job. On the Saturn Outlook, the BCM is typically located in the center dash area, often accessible by removing lower dash panels.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the systems to discharge completely.
  2. Locate the BCM: Access the Body Control Module. In the 2007-2010 Outlook, this is usually behind the glove box or in the center console/dash area. You may need to remove a few trim panels to see it clearly.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
  4. Install the New Module: Mount the replacement BCM in the same location and securely reconnect all electrical connectors. You should hear a ‘click’ as they lock into place.
  5. Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions: windows, locks, lights, wipers, and radio to ensure everything is working as it should.

Important Post-Installation Notes

While our cloning service makes this a plug-and-play repair, some vehicle systems may require a relearn procedure after the new 2007-2010 Outlook BCM is installed. This is normal.

  • Airbag System Sync: If your airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the airbag system with the new BCM.
  • Brake Pedal Position Relearn: Some models may require this recalibration to ensure brake lights and stability control systems function correctly.

Disclaimer: Vehicle systems vary. Always refer to a factory service manual or consult with a qualified technician if you are unsure about any step.

Guaranteed Vehicle Compatibility

This BCM is a direct replacement for a wide range of GM vehicles and part numbers. Please verify your vehicle and original part number from the list below to ensure proper fitment. This module is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.

ACADIA 07-12 (LH dash)
AVALANCHE 1500 10 (under steering column), ID 25892622
CAPRICE 11-13
CAPTIVA SPORT 12 (center dash), ID 20921435, 20921436, or 22860591
CTS 08 (RH dash)
CTS 08-13 (LH dash)
DTS 06-11 (RH center dash)
ENCLAVE 08-12 (LH dash)
EQUINOX 07-09 (center dash)
ESCALADE 10 (under steering column), ID 20815898 or 25892622
ESCALADE ESV 10 (under steering column), ID 20815898 or 25892622
ESCALADE EXT 10 (under steering column), ID 25892622
EXPRESS 1500 VAN 08-12 (center dash)
EXPRESS 2500 VAN 08-12 (center dash)
EXPRESS 3500 VAN 08-12 (center dash)
G8 08-09 (center dash)
HUMMER H2 08-09 (LH firewall)
IMPALA 06-13 (LH dash)
LUCERNE 06-11 (right side dash)
MONTE CARLO 06-07 (LH steering column)
OUTLOOK 07-10 (center dash)
SAVANA 1500 VAN 08-12 (center dash)
SAVANA 2500 VAN 08-12 (center dash)
SAVANA 3500 VAN 08-12 (center dash)
SRX 07-09 (LH dash)
STS 10 (center dash)
SUBURBAN 1500 10 (under steering column), ID 20815898 or 25892622
TAHOE 10 (under steering column), ID 20815898 or 25892622
TORRENT 07-09 (center dash)
TRAVERSE 09-12 (LH dash)
VUE 08-10 (center dash)
YUKON 10 (under steering column), ID 20815898 or 25892622
YUKON XL 1500 10 (under steering column), ID 20815898 or 25892622

Frequently Asked Questions

What is a BCM cloning service?

What is a BCM cloning service?

Cloning is a process where we transfer the exact software and vehicle-specific data (like VIN, mileage, and key codes) from your original BCM to the replacement unit. This makes the new module a perfect electronic match for your vehicle, eliminating the need for dealer programming.

Do I need to program this 2007-2010 Outlook BCM?

No. Because we clone the data from your original module, this BCM arrives ready for installation. It is a true plug-and-play solution, saving you time and money.

Where is the BCM located on my Saturn Outlook?

On the 2007-2010 Saturn Outlook, the Body Control Module is located in the center dash area. It’s often found behind the glove compartment or accessible after removing lower dash trim panels.

What happens to my original BCM?

We always return your original module along with the programmed replacement unit. We need it to perform the cloning service, but we do not keep it. There is no core charge.

Will this fix my intermittent electrical problems?

If your vehicle’s symptoms match those of a failing BCM (erratic lights, locks, windows, security faults), then this replacement module is the correct and reliable fix for those issues.

Genuine OEM

Yes

Condition

Refurbished

MPN

15837419

Interchange part number

PartNumber

591

Model

OUTLOOK

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top