Are you battling bizarre electrical problems in your Saturn Outlook or another compatible GM vehicle? Issues like flickering lights, malfunctioning power windows and locks, or a security system that acts on its own are often signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can cause a wide range of frustrating and difficult-to-diagnose symptoms. This replacement BCM is your direct-fit, reliable solution, pre-programmed to your vehicle’s specific VIN for a straightforward installation.
From the Diagnostic Bay
We had a 2009 GMC Acadia (which uses the same BCM) come into the shop with a classic ‘electrical gremlin’ complaint. The customer said their interior lights would randomly flicker, the radio would sometimes not turn on, and occasionally the liftgate wouldn’t open. They had already replaced the battery twice, assuming it was a power issue. After a quick diagnostic scan, we saw multiple communication errors pointing towards the BCM. A faulty BCM was causing a parasitic draw, draining the battery overnight. By installing a VIN-programmed BCM like this one, we resolved all the electrical issues in one go, saving the customer from further guesswork and the high cost of dealership programming.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not working at all).
- ✔ Security system faults or the vehicle failing to start due to anti-theft issues.
- ✔ Dashboard warning lights appearing randomly (e.g., ABS, Airbag, Traction Control).
- ✔ Wipers or horn activating unexpectedly or not working when needed.
- ✔ Communication errors with other vehicle modules when using a diagnostic scan tool.
Why Choose Our Pre-Programmed 2007-2010 Outlook BCM?
Getting your vehicle back on the road shouldn’t be complicated. A new BCM from a dealership requires towing your vehicle to them for expensive installation and programming. Our solution simplifies the process. We take your vehicle’s VIN at the time of purchase and flash this module with the latest, most stable software directly from GM. This ensures it communicates perfectly with your vehicle’s existing components right out of the box. This is a genuine OEM part that has been professionally prepared for your exact vehicle, ensuring compatibility and function.
Installation and Post-Install Notes
While this module is designed to be as plug-and-play as possible, some vehicles may require simple post-installation procedures. These are not defects but are part of the vehicle’s security and safety systems re-syncing with the new module.
- Airbag System Sync: If your airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be necessary to ensure brake lights and stability control function correctly.
There is no core charge for this module. You can keep your old part.
This module is a direct replacement for a wide range of part numbers, including: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, and many more. Please check the fitment list to confirm for your specific vehicle.
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No. We program the module to your vehicle’s VIN before we ship it. It arrives ready for installation, saving you time and the expense of a dealership visit.
What information do you need from me?
After you complete your purchase, you must provide us with your vehicle’s 17-digit VIN (Vehicle Identification Number). We cannot ship your part without it.
Where is the BCM located on my 2007-2010 Saturn Outlook?
On the 2007-2010 Saturn Outlook, the Body Control Module is typically located in the center dash area. Please consult a service manual for precise location and removal instructions.
Will this fix my car’s specific electrical problem?
This BCM will resolve issues directly caused by a faulty module. While the symptoms listed are common indicators, we always recommend a proper diagnosis by a qualified technician to confirm the BCM is the root cause of your problem before ordering.
What if the airbag light comes on after I install it?
This is a normal security procedure on some vehicles. The new BCM needs to be electronically ‘introduced’ to the airbag module. A repair shop with a professional-grade scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the modules and turn off the light.