Restore Full Electronic Control to Your Saturn Outlook
If you’re dealing with baffling electrical issues in your 2007-2010 Saturn Outlook—like power windows with a mind of their own, flickering interior lights, or a security system that won’t cooperate—a failing Body Control Module (BCM) is the likely culprit. Think of the BCM as the central nervous system for your vehicle’s comfort and convenience features. When it starts to fail, it can cause a cascade of frustrating and seemingly unrelated problems. This replacement BCM is the reliable, cost-effective solution to get your vehicle’s electronics working in perfect harmony again.
We take the guesswork and high dealership costs out of the equation. Before we ship your part, we program it with the latest GM software updates using your vehicle’s specific VIN. This ensures that when you receive it, it’s ready to integrate seamlessly with your Outlook’s existing systems. No extra trips for programming, no surprise fees—just a straightforward fix.
A Technician’s Notebook: The Intermittent Gremlin
I recently had a 2008 Saturn Outlook in my bay that was driving the owner crazy. The radio would cut out, the driver’s side window would work one day but not the next, and the remote keyless entry was completely unreliable. They had already replaced the battery and checked fuses with no luck. After connecting my scan tool, I found several U-codes (communication errors) pointing to the BCM. A failing BCM can disrupt the entire vehicle communication network, causing these phantom issues. We installed a VIN-programmed module, and all the problems vanished instantly. It’s a classic case where replacing the right component, correctly programmed, is the only path to a permanent fix.
Is Your Saturn Showing These Symptoms?
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, it’s a strong indicator that your BCM needs attention:
- ✔ Erratic or non-functional power windows and locks.
- ✔ Interior or exterior lights staying on or not turning on at all.
- ✔ Malfunctioning radio or instrument cluster displays.
- ✔ The security system acting up or preventing the vehicle from starting.
- ✔ Remote keyless entry failure.
- ✔ Diagnostic Trouble Codes (DTCs) related to communication errors, such as U0140, U0155, or other U-codes.
A Straightforward Guide to Your 2007-2010 Outlook BCM Installation
For the confident DIYer, replacing the BCM is a manageable job. In the Saturn Outlook, the BCM is typically located in the center dash area, often accessible from the driver’s or passenger’s footwell. Always consult a service manual for the exact location on your specific vehicle.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes before beginning work.
- Locate the Module: Find the old BCM. You may need to remove a lower dash panel or glove box for access.
- Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old BCM and remove it from the vehicle.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors.
- Final Steps: Reconnect the battery terminal. Start the vehicle and test all functions—lights, locks, windows, radio, etc.
Important Post-Installation Information
While we program the module to your VIN for primary functionality, some vehicle systems require a final handshake after installation. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system. This is only required if the light is on.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure proper operation of the brake lights and traction control system.
- No Core Charge: You can keep your old BCM, as there is no core charge or need to return the original part.
Will This Fit My Vehicle?
This Body Control Module is a direct fit for the 2007-2010 Saturn Outlook. It also serves as a replacement for a wide range of other GM vehicles and part numbers. Please verify your part number against the list below or confirm fitment for your specific model.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Partial Fitment List:
Frequently Asked Questions
Why is my VIN required for this part?
Why is my VIN required for this part?
Your VIN (Vehicle Identification Number) allows us to program the Body Control Module with the precise software and settings for your Saturn Outlook’s specific features. This ensures all electronic components communicate correctly, just like the original module from the factory, saving you a costly trip to the dealership for programming.
What does a Body Control Module (BCM) actually do?
The BCM is a computer that manages many of your vehicle’s non-engine related functions. This includes power windows, power locks, interior and exterior lighting, the security system, wipers, and the radio. When it fails, these systems can become erratic or stop working altogether.
Is this a repair I can do myself?
For many DIY enthusiasts with basic mechanical skills, this is a very manageable installation. The main task involves accessing the module under the dash, swapping the units, and reconnecting the plugs. However, be aware that in some cases, a post-installation procedure like an airbag system sync may require a professional scan tool.
What happens if my airbag light is on after I install the BCM?
An airbag light after installation is not a sign of a defective part. It simply means the new BCM needs to be electronically introduced to the vehicle’s airbag system (SDM). This requires a ‘Setup SDM Primary Key in BCM’ procedure, which can be performed by any professional mechanic with a compatible high-end diagnostic tool.
Do I need to send my old part back?
No. This product comes with no core charge. You can keep or dispose of your old Body Control Module at your convenience.