Restore Full Electrical Function to Your Saturn Outlook
Are you dealing with baffling electrical problems in your 2007-2010 Saturn Outlook? Flickering dashboard lights, power windows with a mind of their own, or a security system that randomly acts up are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can cause a cascade of frustrating and unpredictable issues. This isn’t just an annoyance; it’s a compromise on your vehicle’s reliability and security.
This is your direct, hassle-free solution. We provide a genuine replacement Body Control Module, part number 15828601, that arrives at your door fully programmed to your vehicle’s specific VIN. By handling the programming with the latest GM software updates before we ship, we save you the time, expense, and headache of a dealership visit. You get a part that’s truly ready for installation, allowing you to get your Outlook back to perfect working order quickly and confidently.
A Technician’s Notebook
A customer’s 2008 Saturn Outlook came into the shop last month with a list of strange symptoms. The radio would turn off randomly, the driver’s side power window wouldn’t work, and occasionally the vehicle wouldn’t start, with only a click from the starter. There were no consistent trouble codes, making it a real head-scratcher. After checking the battery and main grounds, we focused on the BCM. In my 20+ years of experience, these intermittent, multi-system electrical gremlins almost always point back to the BCM’s internal logic failing. We installed a VIN-programmed module, and every single issue was resolved instantly. It’s a perfect example of how one component can create widespread, confusing problems.
Is Your Saturn Outlook Showing These Signs?
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Dashboard lights flickering, dimming, or staying on when they shouldn’t.
- ✔ The anti-theft or security system engaging without reason, preventing the car from starting.
- ✔ Interior dome lights or exterior lights not working correctly.
- ✔ Unpredictable behavior from the radio or climate controls.
- ✔ False warnings appearing on the instrument cluster (e.g., ‘Service Airbag’).
A Straightforward Guide to Your BCM Installation
Replacing the BCM in your Outlook is a manageable job for a confident DIYer. For the 2007-2010 Outlook, the BCM is typically located in the center dash area. Always consult a vehicle-specific repair manual for precise location and torque specs.
- Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are de-energized.
- Access the Module: Carefully remove the necessary dash trim panels to gain access to the BCM. It’s often secured by a few bolts or clips.
- Disconnect and Remove: Gently unplug the electrical connectors from the old BCM. Take a photo beforehand if you’re worried about mixing them up. Once disconnected, unbolt and remove the old module.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely fasten it. Reconnect all electrical harnesses, ensuring each one clicks firmly into place.
- Reconnect Power: Reattach the negative battery terminal.
- Perform Relearn Procedures: This is a critical step. You will need a capable diagnostic scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure to clear any airbag faults. Additionally, perform the Brake Pedal Position Sensor Calibration if required for your vehicle.
- Test Everything: Start the vehicle and test all functions controlled by the BCM: windows, locks, lights, radio, etc., to confirm the repair was successful.
Verified Vehicle Compatibility
This Body Control Module is a direct replacement for part number 15828601 and is compatible with a wide range of GM vehicles. While this listing is tailored for the 2007 – 2010 Saturn OUTLOOK, it also fits the models listed below. Always verify your original part number before ordering.
Interchangeable Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
AVALANCHE 1500 10
CAPRICE 11-13
CAPTIVA SPORT 12
CTS 08-13
DTS 06-11
ENCLAVE 08-12
EQUINOX 07-09
ESCALADE 10
ESCALADE ESV 10
ESCALADE EXT 10
EXPRESS 1500 VAN 08-12
EXPRESS 2500 VAN 08-12
EXPRESS 3500 VAN 08-12
G8 08-09
HUMMER H2 08-09
IMPALA 06-13
LUCERNE 06-11
MONTE CARLO 06-07
OUTLOOK 07-10
SAVANA 1500 VAN 08-12
SAVANA 2500 VAN 08-12
SAVANA 3500 VAN 08-12
SRX 07-09
STS 10
SUBURBAN 1500 10
TAHOE 10
TORRENT 07-09
TRAVERSE 09-12
VUE 08-10
YUKON 10
YUKON XL 1500 10
Frequently Asked Questions
Why do you need my VIN number?
We require your Vehicle Identification Number (VIN) to program the BCM with the exact software and vehicle-specific options for your Saturn Outlook. This ensures it works correctly right out of the box.
Is this part truly plug-and-play?
Because we pre-program it, the module itself is plug-and-play. However, as with any BCM replacement on these GM vehicles, you must perform post-installation relearn procedures for the airbag system and possibly the brake pedal sensor using a proper scan tool for full functionality and safety.
Will this 2007-2010 Outlook BCM fix my intermittent starting problem?
If your no-start issue is caused by the factory anti-theft system being incorrectly triggered by a faulty BCM, then yes, this replacement module will resolve that problem.
What happens if I don’t perform the ‘Setup SDM Primary Key’ procedure?
Failure to perform this procedure will result in the airbag warning light staying illuminated on your dash, and the supplemental restraint system (airbags) may not function correctly in an accident. This is a critical safety step.
Can I install this myself at home?
A knowledgeable DIYer can physically install the module. However, you will need access to a bi-directional diagnostic scan tool (like a Tech 2 or high-end equivalent) to complete the necessary relearn procedures. If you don’t have this tool, you will need assistance from a professional mechanic after installation.