Restore Your Saturn’s Electrical System with a Plug-and-Play Solution
Are you tired of chasing electrical gremlins in your Saturn Outlook? Flickering lights, malfunctioning power windows or locks, strange warning messages on the dash, or even a vehicle that refuses to start? These are classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it malfunctions, it can cause a host of frustrating and unpredictable problems. Don’t let a faulty module keep you off the road. This is a direct-fit, reliable solution to get your vehicle operating correctly again.
Case Study: A Tricky Diagnosis
I remember a 2008 Acadia (which shares its platform and BCM with the Saturn Outlook) that came into my shop with the most bizarre symptoms. The radio would turn on and off by itself, the liftgate would open randomly, and the battery was dead every morning. The owner had already replaced the battery twice. A scan showed a flood of communication errors (U-codes). After checking the main power and ground circuits, we traced the issue to the BCM. These modules, often located under the dash, can be susceptible to moisture damage from a leaking windshield or cowl drain. Our cloning service allowed us to transfer all the original vehicle data to a replacement unit, solving all the electrical issues without a costly trip to the dealer for programming. The customer was back on the road the same day with a perfectly functioning vehicle.
What is Our Cloning Service?
This isn’t just a part; it’s a complete service. Instead of shipping you a blank module that requires expensive dealership programming, we handle everything for you. After your purchase, you’ll send us your original BCM. We then extract the critical vehicle-specific dataāincluding key information, mileage, and vehicle optionsāand transfer it directly to this replacement unit. The result is a true plug-and-play module. You receive your original module back along with the newly programmed replacement. This process eliminates the need for special tools or software, saving you time, money, and hassle.
Is Your Outlook Showing These Symptoms?
- ā Erratic or non-functional power windows, door locks, or interior lights.
- ā Horn honking unexpectedly or not working at all.
- ā Intermittent no-start condition where the engine cranks but won’t fire.
- ā Warning lights for the security system, ABS, or airbag system on the dash.
- ā Communication Diagnostic Trouble Codes (DTCs) like U0140, U0155, or U0100.
- ā Rapid battery drain when the vehicle is turned off.
A Straightforward Guide to Installation
- ā Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- ā Locate the BCM: On the 2007-2010 Saturn Outlook, the Body Control Module is typically located in the center dash area, often behind or near the glove box. Refer to a service manual for the exact location on your specific vehicle.
- ā Remove Trim Panels: You may need to carefully remove plastic trim panels to gain access to the module. Use a non-marring pry tool to avoid damage.
- ā Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt the module from its mounting bracket.
- ā Install the New Module: Mount the new, programmed BCM in place and securely reconnect all electrical connectors.
- ā Reassemble and Reconnect: Reinstall any trim panels you removed and reconnect the negative battery terminal.
- ā Test Functionality: Start the vehicle and test all body functionsālights, locks, windows, radio, etc.āto ensure everything is working as it should.
Important Post-Installation Information
While our cloning service makes this a nearly plug-and-play repair, some GM vehicles may require additional steps for full system integration:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to sync the BCM with the airbag module.
- Brake Pedal Position Relearn: On certain models, a brake pedal position sensor relearn may be required to ensure correct brake light operation and to prevent issues with the traction control system.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any part of the process.
Verified Vehicle Compatibility
This BCM is a direct replacement for part number 15299986 and is compatible with a wide range of GM vehicles. Please verify your original part number matches one of the following and confirm the fitment notes for your specific model.
This part fits the following vehicles:
- Saturn Outlook (2007-2010) – Body Control (BCM); (center dash)
- GMC Acadia (2007-2012) – Body Control (BCM); (LH dash)
- Buick Enclave (2008-2012) – Body Control (BCM); (LH dash)
- Chevrolet Traverse (2009-2012) – Body Control (BCM); (LH dash)
- Buick Lucerne (2006-2011) – Body Control (BCM); (right side dash)
- Cadillac DTS (2006-2011) – Body Control (BCM); (RH center dash)
- Cadillac CTS (2008-2013) – Body Control (BCM); LH dash / RH dash (08 only)
- Cadillac SRX (2007-2009) – Body Control (BCM); LH dash
- Cadillac STS (2010) – Body Control (BCM); center dash
- Chevrolet Impala (2006-2013) – Body Control (BCM); (LH dash)
- Chevrolet Monte Carlo (2006-2007) – Body Control (BCM); (LH steering column)
- Chevrolet Equinox (2007-2009) – Body Control (BCM); (center dash)
- Pontiac Torrent (2007-2009) – Body Control (BCM); (center dash)
- Chevrolet Captiva Sport (2012) – Body Control (BCM); (center dash)
- Saturn Vue (2008-2010) – Body Control (BCM); (center dash)
- Pontiac G8 (2008-2009) – Body Control (BCM); (center dash)
- Chevrolet Caprice (2011-2013) – Body Control (BCM)
- Hummer H2 (2008-2009) – Body Control (BCM); (LH firewall)
- Chevy/GMC Trucks & SUVs (2010) – Tahoe, Suburban, Yukon, Escalade, Avalanche
- Chevy Express / GMC Savana Vans (2008-2012) – Body Control (BCM); (center dash)
Frequently Asked Questions
What exactly does this cloning service do?
Our cloning service transfers all the essential data from your original BCM to the replacement unit. This includes security information for your keys, the vehicle’s mileage, and all factory-installed options. This makes the replacement module truly plug-and-play, avoiding the need for a trip to the dealership for expensive programming.
Do I need to get my keys reprogrammed after installation?
No. Because we clone your original module’s data, the replacement BCM will recognize your existing keys, saving you a significant amount of time and money.
Is this a difficult part for a DIY mechanic to install?
The physical replacement is straightforward for someone with basic mechanical skills. It involves removing some dash panels and unplugging connectors. The main benefit of our service is that it removes the most difficult part: the computer programming. Just swap the module and you’re good to go.
What is your core policy? Do I get my old part back?
Yes, absolutely. We require your original module to perform the cloning service. Once the service is complete, we ship your original module back to you along with the newly programmed replacement. We do not keep your original part.
My airbag light is on after installing the BCM. Is it defective?
No, this is a known possibility with some GM vehicles. The BCM needs to be electronically ‘introduced’ to the airbag system (SDM). This requires a ‘Setup SDM Primary Key in BCM’ procedure, which can be done by a repair shop with a professional-grade diagnostic tool.