Is Your Dodge Caliber, Jeep Patriot, or Compass Experiencing Critical Issues?
If your vehicle is stalling, refusing to start, displaying erratic dashboard lights, or has a persistent check engine light, you may be facing a failing Engine Control Module (ECM). The ECM is the brain of your vehicle, managing everything from fuel injection and ignition timing to emissions control and transmission shifting. When it fails, it can cause a cascade of frustrating and seemingly unrelated problems, making your vehicle unreliable and unsafe to drive. Don’t let a faulty computer keep you off the road.
From the Diagnostic Bay
We had a 2009 Jeep Patriot come into the shop that had its owner completely stumped. The vehicle would randomly stall at traffic lights and occasionally wouldn’t start at all. The owner had already replaced the crankshaft and camshaft position sensors, the throttle body, and even the fuel pump based on various forum suggestions. The check engine light was on with a P0601 (Internal Control Module Memory Check Sum Error). After confirming power and ground to the module were solid, we knew the issue was internal to the ECM itself. Instead of a costly trip to the dealer for a new unit and programming, we installed one of our pre-programmed modules. The Patriot fired right up, idled smoothly, and the P0601 code was gone for good. It’s a classic case of symptoms pointing to multiple parts, but the root cause being the central computer.
The Direct Solution: A Plug-and-Play 2007-2010 Caliber ECM
This replacement Engine Control Module is the definitive solution for your 2007-2010 Dodge Caliber, Jeep Patriot, or Jeep Compass. We take the guesswork and high cost out of the repair process. Each module is professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This critical step ensures that the computer communicates flawlessly with your vehicle’s other systems, including the ignition, keys, and instrument cluster. The result is a true Plug & Play installation experience. Simply disconnect the old module, connect this one, and you’re back in business. No expensive dealer programming or special tools required.
Common Symptoms of a Failing ECM:
- ✔ Check Engine Light is on with codes related to the processor (e.g., P0600-P0606).
- ✔ Engine stalls intermittently or for no apparent reason.
- ✔ Vehicle cranks but will not start.
- ✔ Noticeable decrease in fuel economy.
- ✔ Poor engine performance, including hesitation or misfires.
- ✔ Automatic transmission shifting issues.
- ✔ Communication problems with diagnostic scan tools.
Guaranteed Compatibility and Fitment
This ECM is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle. It is compatible with the following models and part numbers:
Vehicle Fitment:
- 2007-2010 Dodge Caliber (All engines)
- 2007-2010 Jeep Patriot
- 2007-2010 Jeep Compass
Compatible Part Numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 05150471AA, 05150523AA, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, 68044228AA
By ordering this part, you are getting a reliable, fully functional module that has been tested and prepared for your specific vehicle. Restore your vehicle’s performance and reliability today with this essential component.
Frequently Asked Questions
What information do you need to program the ECM?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This information allows us to program the module to match your car’s factory settings, ensuring a seamless, Plug & Play installation.
Is this ECM really “Plug & Play”?
Yes. Because we program the module with your vehicle’s specific VIN, it will be ready to install right out of the box. It will recognize your existing keys and security system, eliminating the need for a trip to the dealership for additional programming.
Where is the ECM located on my 2007-2010 Dodge Caliber?
The ECM on the Dodge Caliber, Jeep Patriot, and Compass is typically located in the engine bay. You can usually find it mounted to the firewall or on one of the inner fender wells. It will have two or three large electrical connectors attached to it.
Will this fix my check engine light?
If the check engine light is caused by an internal failure of the ECM (common codes include P0601, P0605, P0606), then this replacement module will solve the problem. However, if the code is for a faulty sensor or another component, that part will still need to be addressed. A proper diagnosis is always recommended before ordering.
Do I need to perform a relearn procedure after installation?
In most cases, no extensive relearn procedure is needed. After installing the new ECM and reconnecting the battery, you should let the vehicle idle for 5-10 minutes to allow the computer to acclimate. Some vehicles may require a short drive cycle for all systems to fully sync, but no special tools are required.