Restore Your Jeep’s Performance and Reliability
Is your 2007-2010 Jeep Compass, Patriot, or Dodge Caliber giving you headaches? If you’re dealing with frustrating issues like a persistent check engine light, erratic engine behavior, stalling, or a complete no-start condition, a failing Engine Control Module (ECM) is often the culprit. As the brain of your vehicle’s engine, a faulty ECM can cause a cascade of problems that are difficult to diagnose. This replacement 2007-2010 Compass Engine Computer is the definitive solution to get your vehicle running smoothly and reliably again, without the astronomical costs and hassle of a dealership visit.
What makes this part the best choice for both DIY mechanics and professional technicians is our pre-programming service. We flash the module with your vehicle’s specific VIN and current mileage before it even ships. This means it arrives at your door ready for a true Plug-and-Play installation. There is no need for expensive trips to the dealer for programming or the use of specialized scan tools. You can restore your vehicle’s core functionality right in your own garage.
Common Signs of a Failing Engine Computer
- âś” Check Engine Light is on with communication-related codes (e.g., U0100) or internal processor failure codes (e.g., P0601, P0606).
- âś” The engine cranks but refuses to start.
- âś” Unexplained stalling or rough idling, especially after the engine warms up.
- âś” Noticeable decrease in fuel economy and poor engine performance.
- âś” Problems with the automatic transmission shifting correctly.
- âś” Seemingly random electrical issues affecting multiple systems.
Case Study: A Tricky Diagnosis
I remember a 2008 Jeep Compass that came into the shop with a ghost of a problem. The owner complained of intermittent stalling, but only on hot days after driving for 30+ minutes. There were no consistent trouble codes, just a history of random communication faults. We checked the fuel pump, sensors, and wiring harnesses, but everything tested fine. On a hunch, I used a heat gun to carefully warm up the ECM while the engine was idling. Within two minutes, the engine sputtered and died. After it cooled, it started right back up. This confirmed the ECM had an internal thermal failure. We installed one of these pre-programmed units, and the customer never had the issue again. It’s a classic example of how a failing 2007-2010 Compass Engine Computer can create symptoms that mimic other problems.
A Straightforward Guide to Installation
- âś” Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes to allow the system to fully discharge.
- âś” Locate the ECM: On most of these models, the Engine Control Module is located in the engine bay, typically near the firewall or inner fender. It’s a metal box with several large electrical connectors.
- âś” Disconnect and Remove: Carefully unplug the electrical connectors. Most have a locking tab or lever that needs to be released. Once disconnected, unbolt the module from its mounting bracket.
- âś” Install the New Module: Bolt the new, pre-programmed ECM into place. Securely reconnect the electrical connectors, ensuring they click and lock into position.
- âś” Reconnect and Start: Reconnect the negative battery terminal. Turn the key to the ‘On’ position for 15 seconds without starting the engine to allow the systems to initialize. Then, start the vehicle. Your installation is complete!
Verified Vehicle Compatibility
This module is a direct-fit replacement for a wide range of vehicles and part numbers, ensuring you get the correct component the first time. It is compatible with the following original equipment part numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 05150471AA, 05150523AA, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, and 68044228AA.
This 2007-2010 Compass Engine Computer will fit the following vehicles:
- 2007-2010 Jeep Compass (Electronic Control Module)
- 2007-2010 Jeep Patriot (Electronic Control Module)
- 2007-2008 Dodge Caliber (Electronic Control Module)
- 2009 Dodge Caliber (Electronic Control Module; 1.8L)
- 2009 Dodge Caliber (Electronic Control Module; 2.0L, gasoline)
- 2009 Dodge Caliber (Electronic Control Module; 2.4L, engine opt ED3)
- 2010 Dodge Caliber (Electronic Control Module; 2.0L)
- 2010 Dodge Caliber (Electronic Control Module; 2.4L)
Frequently Asked Questions
Do I need to do any programming after I install this?
No. This engine computer arrives fully programmed to your vehicle’s VIN and mileage. It is a 100% Plug-and-Play solution, requiring no further action from a dealer or mechanic.
Where do I provide my VIN and mileage?
You will be prompted to enter your vehicle’s VIN and mileage during the checkout process. Please ensure this information is accurate to guarantee proper programming.
Is this compatible with my existing keys?
Yes. Our programming process ensures the module works seamlessly with your vehicle’s existing keys and anti-theft system, so you won’t have any starting issues.
What if my original part number isn’t listed?
The part numbers listed are the most common, but there may be others. If you are unsure about compatibility, please contact us with your VIN, and our experts will verify the correct fitment for your vehicle.
Will this fix my specific check engine light code?
This module is a direct fix for internal ECM failure codes like P0601, P0606, and communication codes like U0100. If your check engine light is caused by a faulty sensor or other component, you will still need to address that separate issue.