Is Your Jeep Compass Experiencing Frustrating Engine Problems?
If you’re dealing with a check engine light that won’t go away, intermittent stalling, a no-start condition, or unpredictable engine performance in your 2007-2010 Jeep Compass, the root cause is often a failing Engine Control Module (ECM). As the brain of your vehicle, a faulty ECM can create a cascade of confusing issues that are difficult to diagnose. I’ve seen it countless times in my 20+ years as a technician: owners replace sensors, spark plugs, and coils, only to find the core problem was the computer all along.
A Technician’s Real-World Experience
“A customer’s 2008 Compass came into my shop last month with these exact symptoms. It would crank but not start, and when it did run, it shifted erratically. The dashboard was lit up with communication error codes (U-codes). After confirming solid power and ground connections at the module, my diagnostic scanner pointed directly to an internal failure within the original ECM. Swapping it with a correctly programmed unit like this one had the vehicle running perfectly in under 30 minutes. It’s a common failure point on this platform.”
The Direct Solution: A Fully Programmed, Plug-and-Play ECM
Forget expensive dealership visits and the hassle of towing your vehicle for programming. This Engine Control Module arrives at your door fully programmed to your vehicle’s specific VIN and mileage. This critical service ensures that all the complex immobilizer (security) and communication protocols match your Compass perfectly, allowing for a seamless installation. It’s designed to be a true plug-and-play solution.
Common Symptoms of a Failing 2007-2010 Compass Engine Computer:
- โ Persistent Check Engine Light (CEL)
- โ Unexplained engine misfires or rough idling
- โ Vehicle cranks but refuses to start
- โ Sudden engine stalling while driving
- โ Poor fuel economy and reduced power
- โ Communication errors with other vehicle modules (U-codes)
- โ Inconsistent or harsh automatic transmission shifting
Plug-and-Play Installation: No Dealer Visit Required
You can get your Compass back on the road without specialized tools. Our programming service makes this a straightforward DIY repair for many owners or a quick job for your local mechanic.
- Safety First: Disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes for the system capacitors to discharge.
- Locate the ECM: On most 2007-2010 Compass models, the ECM is located in the engine bay, typically near the battery or firewall.
- Disconnect the Module: Carefully unplug the electrical connectors from the old ECM. Press the release tabs firmly and pull straight out. Never force them.
- Swap the Modules: Unbolt and remove the old computer. Mount the new, pre-programmed module in its place.
- Reconnect and Secure: Plug the wiring harness connectors into the new ECM until they click securely into place. Reconnect the negative battery terminal.
- Final Check: Turn the key to the ‘ON’ position for 10 seconds before starting the engine. This allows the modules to communicate. Start your vehicle and enjoy restored performance.
Guaranteed Fitment and Compatibility
This module is a direct replacement for a wide range of part numbers, ensuring it works with your vehicle’s specific configuration. Please verify your original part number against this list for guaranteed compatibility.
This module is compatible with the following part numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, 68044228AA
This part will fit these makes and models with these options:
- COMPASS 2007-2010 Electronic Control Module
- PATRIOT 2007-2010 Electronic Control Module
- CALIBER 2007-2008 Electronic Control Module
- CALIBER 2009 Electronic Control Module; 1.8L
- CALIBER 2009 Electronic Control Module; 2.0L, gasoline
- CALIBER 2010 Electronic Control Module; 2.0L
- CALIBER 2009 Electronic Control Module; 2.4L, engine opt ED3
- CALIBER 2010 Electronic Control Module; 2.4L
Choosing this pre-programmed 2007-2010 Compass Engine Computer is the most efficient and cost-effective way to permanently solve your vehicle’s electronic issues and restore its original reliability and performance.