Is Your Jeep Compass Giving You Headaches?
If you’re dealing with a 2007-2010 Jeep Compass, Patriot, or Dodge Caliber that’s suddenly stalling, refusing to start, or running rough with a persistent check engine light, the engine control module (ECM) is a very likely culprit. Over my 20+ years turning wrenches, I’ve seen countless cases where these symptoms send owners and even other shops down a rabbit hole of replacing perfectly good sensors and parts, only for the problem to remain. The issue isn’t the sensors; it’s the brain that’s misinterpreting their signals.
A Technician’s Real-World Scenario: “A customer’s 2009 Compass came in last week with these exact symptoms. It had a random misfire code, a throttle position sensor code, and would intermittently die at stoplights. The owner had already replaced the spark plugs and a sensor with no luck. We connected our diagnostic tool and found multiple communication errors pointing directly to the ECM. Instead of a costly, time-consuming dealer visit, we installed one of our pre-programmed modules. The vehicle started instantly, all codes were gone, and it ran smoother than it had in years. This is the fix that gets you back on the road without the guesswork.”
The Direct Solution: A Pre-Programmed 2007-2010 Compass Engine Computer
This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take all the complexity out of the repair. Simply provide us with your vehicle’s VIN and current mileage during checkout, and our experts will flash this module with your vehicle’s specific software. It arrives at your door ready to be installed, making this a true plug-and-play repair you can perform in your own driveway.
Common Symptoms of a Failing ECM:
- โ Unexplained Check Engine Light (CEL)
- โ Vehicle refuses to start or has a hard starting condition
- โ Intermittent stalling or engine shutting off while driving
- โ Poor engine performance and reduced fuel economy
- โ Communication errors with diagnostic scan tools
- โ Apparent transmission shifting problems
Plug-and-Play Installation: No Dealer Visit Required
Save yourself the time, towing fees, and high labor costs of a trip to the dealership. Installing this module is straightforward. Follow these simple steps to get your vehicle running properly again.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
- Locate the ECM: On most Compass, Patriot, and Caliber models, the ECM is located in the engine bay, typically mounted to the firewall or inner fender.
- Disconnect the Connectors: Carefully unclip the wiring harnesses from the old module. Inspect the pins on the connectors for any signs of corrosion or damage.
- Remove the Old Module: Unbolt the original ECM from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed ECM in place and securely fasten the bolts.
- Reconnect Everything: Firmly plug the wiring harnesses into the new module until they click. Reconnect the negative battery terminal.
- Start the Vehicle: Your vehicle is now ready to start with its new brain. The correct VIN and security information are already loaded, so no further action is needed.
Guaranteed Fitment and Compatibility
This engine computer is a direct-fit replacement for a wide range of vehicles and part numbers. Please verify your original part number against this list or confirm your vehicle is listed below to ensure perfect compatibility.
This module is a direct replacement for the following part numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, 68044228AA
This part will fit these makes and models with these options:
- Jeep Compass: 2007, 2008, 2009, 2010 (Electronic Control Module)
- Jeep Patriot: 2007, 2008, 2009, 2010 (Electronic Control Module)
- Dodge Caliber: 2007-2008 (Electronic Control Module)
- Dodge Caliber: 2009 (Electronic Control Module; 1.8L, 2.0L gasoline, or 2.4L with engine opt ED3)
- Dodge Caliber: 2010 (Electronic Control Module; 2.0L or 2.4L)
Don’t stay stranded or put up with poor performance any longer. This pre-programmed 2007-2010 Compass Engine Computer is the most reliable and efficient way to solve your vehicle’s electronic issues and restore its performance and dependability.