Is Your Sebring, Avenger, or Journey Running Rough?
If you’re dealing with a persistent check engine light, erratic engine behavior, stalling, or a no-start condition in your 2007-2010 Chrysler Sebring, Dodge Avenger, or Dodge Journey, the root cause is often a failing Engine Control Module (ECM). The ECM is the brain of your vehicle, managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it starts to fail, it can cause a cascade of frustrating and difficult-to-diagnose problems. Don’t let a faulty computer keep you off the road. This direct-fit replacement ECM is your reliable, plug-and-play solution.
From the Diagnostic Bay
We had a 2009 Dodge Avenger with the 2.4L engine come into the shop that had its owner pulling his hair out. The car would randomly stall at stoplights and had a check engine light for an oxygen sensor circuit. The owner had already replaced the O2 sensor twice, but the code kept coming back. After hooking up our diagnostic scanner and monitoring the live data, we noticed the voltage from the ECM to the sensor heater was fluctuating wildly. Instead of a faulty sensor or wiring, the driver circuit inside the original ECM was failing. We installed one of our pre-programmed modules, and the problem was solved instantly. The car ran smoothly, and the code never returned. It’s a classic case where the symptom points one way, but the real fault lies within the engine’s computer.
Symptoms of a Failing 2007-2010 Sebring Engine Computer
A failing ECM can manifest in various ways. If you’re experiencing any of the following issues, it’s a strong indicator that your engine computer needs replacement. Look out for:
- ✔ Check Engine Light: An illuminated CEL (Check Engine Light) with codes related to sensor circuits, communication errors (U-codes), or processor faults.
- ✔ Engine Stalling or Misfiring: The engine may stall unexpectedly while driving or at idle, or you may feel random misfires and hesitation during acceleration.
- ✔ No-Start Condition: The engine cranks but refuses to start, often due to the ECM not firing the fuel injectors or ignition coils.
- ✔ Poor Fuel Economy: A faulty module can’t properly calculate the air-fuel mixture, leading to a noticeable drop in MPG.
- ✔ Harsh or Erratic Shifting: The ECM works with the transmission control module, and a fault can lead to delayed or hard shifts.
- ✔ Failure to Communicate: Your mechanic’s diagnostic scanner may be unable to establish a connection with the ECM.
The Plug-and-Play Solution You Need
Replacing an ECM has traditionally been a costly and inconvenient process, requiring a trip to the dealership for expensive programming. Our modules eliminate that hassle. This 2007-2010 Sebring Engine Computer is meticulously tested and programmed specifically for your vehicle. We flash it with the latest Chrysler software updates and program it to your vehicle’s unique Vehicle Identification Number (VIN). This ensures that once you receive it, the installation is straightforward: disconnect the battery, swap the modules, and reconnect the battery. There is no need for any additional programming or dealer intervention. It’s designed to restore your vehicle’s original performance and reliability from the moment you turn the key.
Compatibility and Part Numbers
This ECM is a direct replacement for a wide range of part numbers, ensuring broad compatibility across the Sebring, Avenger, and Journey platforms with the 2.4L engine. It is compatible with the following part numbers: 05150472AA, 05150518AA, 68046281AA, 68046281AB, 68046281AC, 68046281AD, 68046282AA, 68046282AB, 05187273AD, and many more listed in the product specifications. Verify your original part number to ensure a perfect match.
Frequently Asked Questions
Is this part truly “Plug & Play”?
Yes. We program the module with your vehicle’s specific VIN and mileage. This ensures that it will integrate seamlessly with your car’s existing systems, like the immobilizer and keys, without requiring a trip to the dealership for further programming.
What information do you need from me after I order?
After you place your order, we will need your vehicle’s 17-digit VIN (Vehicle Identification Number). This is crucial for programming the unit correctly. You can typically find your VIN on the driver’s side dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Will this fix my specific problem or check engine light?
This module will correct issues directly caused by a faulty ECM. While it resolves the most common electronic engine problems, it’s essential to ensure your vehicle has been properly diagnosed. This part will not fix issues related to other faulty mechanical or electrical components (e.g., a bad fuel pump or a broken wire).
How do I find my original part number?
Your vehicle’s original ECM part number is printed on a sticker on the module itself. You will need to locate the ECM in your engine bay (consult a repair manual for the exact location) and read the number directly from the label.
Do I need to send my old computer (core) back?
This listing does not require a core return. You can keep or responsibly dispose of your old module without any additional charges or hassle.