2007-2009 Torrent Body Control Module 15880684 Programmed To Your VIN VIN BCM

End Your Torrent’s Electrical Gremlins

Stop chasing weird electrical problems. This Body Control Module (BCM), complete with our expert cloning service, is the definitive fix for your 2007-2009 Pontiac Torrent. We transfer your vehicle’s original data to this unit, making installation simple and avoiding costly dealer programming. Restore your power windows, locks, and lights to perfect working order. Order today for a simple, reliable fix!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-585 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Brain and End Electrical Chaos

If you’re dealing with bizarre electrical issues in your 2007-2009 Pontiac Torrent—like flickering dash lights, malfunctioning power windows, or a security system that has a mind of its own—you’re likely facing a failing Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a faulty BCM can create a cascade of frustrating and seemingly unrelated problems. I’ve seen it countless times in the shop: a customer comes in thinking they have five different issues, when in reality, it’s just one failing BCM causing all the trouble.

This isn’t just a replacement part; it’s a complete, hassle-free solution. We offer a professional Cloning Service that makes this repair straightforward. Simply send us your original BCM, and we will transfer all the critical vehicle-specific data—including key information and security settings—to this replacement unit. This means no expensive trip to the dealership for programming. The module arrives at your door ready for installation, saving you time, money, and headaches. This is the most reliable way to ensure your 2007-2009 Torrent BCM replacement works seamlessly with your vehicle’s existing systems.

Case Study: The Haunted Pontiac Torrent

A customer brought in a 2008 Torrent with a list of complaints that sounded like a poltergeist had taken up residence in the dashboard. The radio would switch stations on its own, the interior lights would pulse randomly, and the anti-theft light would flash, occasionally preventing the car from starting. They had already replaced the battery and checked the alternator. Using a professional scan tool, I saw multiple U-codes (communication loss) with various modules. This is a classic sign. Instead of chasing each individual symptom, we went straight for the central hub: the BCM. A quick check of the BCM’s power and ground circuits confirmed they were good, pointing to an internal failure of the module itself. With a cloned replacement BCM, every single ghost in the machine vanished. It’s a perfect example of how one component can cause widespread, confusing symptoms.

What is a Cloning Service and Why Do You Need It?

Modern vehicles store essential data like VIN, mileage, and security key information directly on the BCM. A generic, non-programmed module from a parts store won’t work because it lacks this unique data, and your vehicle won’t recognize it. Our cloning service is the answer. We use specialized equipment to perform a direct, bit-by-bit data transfer from your original BCM to the replacement unit. This process creates a true ‘clone’ of your factory module, ensuring all functions work exactly as they did before the failure. It’s the closest you can get to a plug-and-play repair for a complex electronic component.

Common Signs of a Failing BCM

  • ✔ Intermittent or non-working power windows, door locks, or mirrors.
  • ✔ Erratic behavior from the radio, climate control, or interior lighting.
  • ✔ Dashboard warning lights (like ABS, Airbag, or Security) illuminating for no reason.
  • ✔ A battery that drains overnight due to the BCM not properly shutting down accessories.
  • ✔ The vehicle’s anti-theft system preventing it from starting.
  • ✔ Communication error codes, such as U0140 (Lost Communication With Body Control Module).

A Straightforward Guide to Your BCM Swap

  1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. ✔ Locate the BCM: In the 2007-2009 Pontiac Torrent, the Body Control Module is typically located behind the center dash console area. You may need to remove trim panels to access it.
  3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be pressed. Once disconnected, unbolt the module from its mounting bracket.
  4. ✔ Install the New Module: Mount the cloned BCM in the same location and securely re-attach the electrical connectors. You should hear a click as they lock into place.
  5. ✔ Reconnect Power: Re-attach the negative battery terminal.
  6. ✔ Test Functions: Start the vehicle and test all body functions: lights, locks, windows, radio, etc., to confirm the repair was successful. Note any post-installation procedures that may be required for your specific vehicle.

Important Post-Installation Information

While our cloning service makes this repair as simple as possible, some GM vehicles may require additional steps after installation:

  • Airbag System Sync: If your airbag light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure may be needed. This requires a professional-grade scan tool to sync the airbag system with the new BCM.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn is necessary to ensure correct brake light and traction control operation.

Disclaimer: Vehicle systems vary. Always have a factory service manual or a qualified technician available for reference.

Verified Vehicle Compatibility

This module, part number 15880684, is a direct replacement for a wide range of GM vehicles and interchanges with numerous part numbers. While this listing is focused on the 2007-2009 Torrent BCM, please verify your vehicle in the list below. Match your original part number or confirm your vehicle’s make, model, and year to ensure proper fitment.

EQUINOX 07-09, EXPRESS/SAVANA VANS 08-12, IMPALA 06-13, ACADIA 07-12, MONTE CARLO 06-07, TAHOE/YUKON 10, TRAVERSE 09-12, CAPTIVA SPORT 12, DTS 06-11, OUTLOOK 07-10, SUBURBAN 10, ESCALADE/EXT/ESV 10, STS 10, CTS 08-13, G8 08-09, AVALANCHE 10, LUCERNE 06-11, SRX 07-09, HUMMER H2 08-09, VUE 08-10, CAPRICE 11-13, ENCLAVE 08-12. (Please check the detailed fitment data and part number interchange list for specific options and IDs).

This part replaces the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Frequently Asked Questions

How does the cloning service work after I order?

After you place your order, we will provide you with instructions to ship your original BCM to us. Once we receive it, our technicians will transfer the data to the replacement unit and ship both modules back to you, typically within 1-2 business days.

Do I need to send my VIN number?

While the cloning process copies data directly from your module, providing your VIN helps us verify we are working with the correct hardware and software combination for your vehicle. It’s a crucial cross-reference step.

Will I get my original BCM back?

Yes, absolutely. We always return your original module along with the newly programmed replacement unit. We do not keep customer cores.

Is this repair something a DIYer can do?

Yes, for many people it is. The cloning service eliminates the need for dealer-level computer programming, which is the biggest hurdle. The physical replacement is often a matter of removing some dash panels and unplugging connectors. However, if you are not comfortable with this, we recommend professional installation.

What if my airbag light comes on after installation?

This is uncommon but can happen. It means the BCM needs to be electronically introduced to the airbag system (SDM). This procedure, called ‘Setup SDM Primary Key in BCM’, must be done with a bi-directional scan tool and is a quick process for any professional mechanic.

Genuine OEM
Condition
MPN

15880684

Interchange part number
PartNumber
Model

TORRENT

Year
Brand
Manufacturer Part Number
Scroll to Top