Are you battling frustrating electrical gremlins in your Cadillac SRX or other GM vehicle? A faulty Body Control Module (BCM) is often the culprit behind a host of bizarre and unpredictable issues. The BCM acts as the central command center for your vehicle’s body electronics, managing everything from your power windows and locks to your interior lighting and security system. When it fails, it can feel like your car has a mind of its own.
This is a direct-fit replacement Body Control Module, part number 10382479, that arrives fully programmed to your vehicle’s specific VIN. We handle the complex programming for you, loading the latest GM software updates before we ship. This means you can bypass the expensive trip to the dealership for programming, saving you time and money. Simply provide your VIN after purchase, and we’ll deliver a module that’s ready for installation.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ The security system or keyless entry malfunctioning.
- ✔ Unexplained battery drain that leaves you with a dead battery.
- ✔ False warning lights or messages on the instrument cluster (e.g., ‘Service Theft System’).
- ✔ Wipers or radio turning on and off unexpectedly.
Why Choose Our 2007-2009 SRX Body Control Module?
Choosing our pre-programmed BCM is the smartest way to get your vehicle back on the road. We take the guesswork out of the repair. Each module is meticulously tested and flashed with the correct software for your exact vehicle using your VIN. This ensures seamless integration and restores the original functionality of all your vehicle’s electronic features. This is a reliable and cost-effective solution to a complex problem.
Post-Installation Procedures
While this module is programmed for your vehicle, some systems may require a ‘handshake’ after installation. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure correct brake light operation and to prevent issues with the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Extensive Compatibility
This 2007-2009 SRX Body Control Module is also a direct replacement for a wide range of other GM vehicles and part numbers, ensuring broad compatibility. Please verify your part number or vehicle in the list below.
Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
What is a Body Control Module (BCM)?
The BCM is a computer in your vehicle that controls and monitors most of the non-engine related electronic functions, such as power windows, locks, lights, wipers, and the security system.
Do I need to get this BCM programmed?
No. We program the module to your vehicle’s VIN before shipping it to you. It arrives ready for installation, saving you a trip to the dealership.
How do I provide my VIN?
After you complete your purchase, you will need to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your order until we receive your VIN.
Is this part difficult to install?
For the 2007-2009 SRX, the BCM is located on the left-hand (driver’s) side of the dash. While physical installation is straightforward for someone with mechanical experience, some post-installation electronic procedures like an airbag or brake sensor relearn may be required.
What happens if my airbag light is on after installation?
This is a common occurrence. The new BCM needs to be synced with the airbag’s Supplemental Deployment Module (SDM). This requires a ‘Setup SDM Primary Key in BCM’ procedure using a professional-grade scan tool.
Is there a core charge?
No, there is no core charge for this part. You can keep your old module.