Restore Full Functionality to Your Cadillac SRX
Is your 2007-2009 Cadillac SRX acting possessed? Flickering lights, unresponsive power windows, a security system that won’t cooperate, or even a frustrating no-start condition can all point to one culprit: a failing Body Control Module (BCM). As the central nervous system for your vehicle’s electronics, when the BCM falters, it can cause a cascade of baffling electrical problems. This isn’t just an inconvenience; it can be a serious safety issue. This listing offers a reliable, straightforward solution to get your luxury SUV back in perfect working order.
We provide a professional Cloning Service for your BCM. This is the most seamless way to replace the module. Simply send us your original BCM after purchase, and we will transfer all the critical vehicle-specific data—including VIN, mileage, and key information—to this replacement unit. The result? A true plug-and-play module that arrives at your door ready for installation, with no need for an expensive trip to the dealership for programming. This is the ideal solution for both professional mechanics and savvy DIYers looking to save time and money on the repair of their 2007-2009 SRX BCM.
A Technician’s Notebook: The SRX Electrical Ghost
I remember a 2008 SRX that came into the shop with a laundry list of complaints from the owner. The radio would turn on and off by itself, the driver’s side window was stuck down, and the anti-theft light would flash randomly, sometimes preventing the car from starting. The owner had already replaced the battery and checked all the fuses. Diagnostics showed a handful of communication codes (U-codes) pointing to a network issue. Instead of just throwing parts at it, we located the BCM on the left side of the dash. There was no visible damage or corrosion, but experience has shown me that internal solder joints and microprocessors on these modules can fail from years of heat cycles and vibration. By swapping in a cloned BCM, we instantly resolved every single issue. This is a classic failure pattern, and our cloning service for the 2007-2009 SRX BCM is designed to be the definitive fix.
Common Signs of a Failing BCM
If your vehicle is experiencing any of the following, a faulty Body Control Module is a very likely cause. Don’t let these issues linger—addressing them can prevent further complications.
- ✔ Intermittent or non-working power windows, door locks, or interior lights.
- ✔ The security or anti-theft light stays on or flashes, potentially causing a no-start condition.
- ✔ Dashboard gauges behaving erratically or not working at all.
- ✔ Horn, wipers, or other accessories activating on their own or not working when commanded.
- ✔ Diagnostic trouble codes related to communication errors, such as U0100, U0140, or other B-series codes.
- ✔ Key fobs that suddenly stop working.
A Straightforward Guide to BCM Installation
With our cloning service, installing your replacement BCM is a manageable task for anyone with basic tools. Follow these general steps for a successful replacement.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the BCM: On the 2007-2009 Cadillac SRX, the Body Control Module is typically located on the left (driver’s) side of the dashboard, often behind the lower dash panel or near the steering column.
- Access the Module: You may need to remove a few trim panels to gain clear access to the BCM. Take your time and keep track of any screws or clips.
- Disconnect and Remove: Carefully unplug all electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
- Install the New Module: Mount your new, cloned BCM in the same location and securely reconnect all the electrical connectors. Ensure they click into place.
- Final Steps: Re-install any trim panels you removed and reconnect the negative battery terminal. Start the vehicle to confirm that the electrical issues are resolved.
Post-Installation Procedures
While our cloning service makes this a plug-and-play process, some GM vehicles may require additional steps after installation:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be done with a compatible professional scan tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure proper function of the brake lights and stability control systems.
Disclaimer: Procedures can vary. We always recommend consulting a factory service manual or a certified technician for your specific vehicle.
Verified Vehicle Compatibility List
This module is a direct fit for the 2007-2009 Cadillac SRX and is also compatible with a wide range of other GM vehicles. Please match your original part number to the list below to ensure compatibility. This module replaces the following part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
This part fits these models with these options:
AVALANCHE 1500 10 Body Control (BCM); (under steering column), ID 25892622
CAPRICE 11-13 Body Control (BCM)
CAPTIVA SPORT 12 Body Control (BCM); (center dash), ID 20921435, 20921436, 22860591
CTS 08 Body Control (BCM); RH dash
CTS 08-13 Body Control (BCM); LH dash
DTS 06-11 Body Control (BCM); (RH center dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
EQUINOX 07-09 Body Control (BCM); (center dash)
ESCALADE 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
ESCALADE ESV 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
ESCALADE EXT 10 Body Control (BCM); (under steering column), ID 25892622
EXPRESS 1500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 2500 VAN 08-12 Body Control (BCM); (center dash)
EXPRESS 3500 VAN 08-12 Body Control (BCM); (center dash)
G8 08-09 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
IMPALA 06-12 Body Control (BCM); (LH dash)
IMPALA 13 Body Control (BCM); (LH dash), ID 22820315
LUCERNE 06-11 Body Control (BCM); (right side dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
OUTLOOK 07-10 Body Control (BCM); (center dash)
SAVANA 1500 VAN 08-12 Body Control (BCM); (center dash)
SAVANA 2500 VAN 08-12 Body Control (BCM); (center dash)
SAVANA 3500 VAN 08-12 Body Control (BCM); (center dash)
SRX 07-09 Body Control (BCM); LH dash
STS 10 Body Control (BCM); center dash
SUBURBAN 1500 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
TAHOE 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
TORRENT 07-09 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
VUE 08-10 Body Control (BCM); (center dash)
YUKON 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
YUKON XL 1500 10 Body Control (BCM); (under steering column), ID 20815898, 25892622
Frequently Asked Questions
What is a BCM cloning service?
Cloning is a process where we transfer the exact software, VIN, mileage, and security data from your original BCM to the replacement unit. This makes the new module a perfect electronic match for your vehicle, eliminating the need for dealer programming.
Do I need to get this module programmed by a dealer?
No. Because we clone your original module’s data, this unit arrives ready to install. It is a true plug-and-play solution that saves you the time and high cost of dealership programming.
Will this fix my key fob and security issues?
Yes, in most cases. The BCM controls the remote keyless entry and anti-theft systems. By cloning your original data, the replacement BCM will recognize your existing keys, resolving these common problems.
Do you keep my old BCM?
No, we do not require a core. Your original module is used for the cloning process and will always be returned to you along with your newly prepared replacement BCM.
Is this a difficult part to replace myself?
For someone with basic mechanical skills, it is a manageable job. The main challenge is accessing the module behind the dashboard trim. By following our guide and taking your time, a DIY replacement is very achievable.