Is Your Vehicle Plagued by Bizarre Electrical Problems?
If you’re dealing with flickering lights, malfunctioning power windows, a security system that won’t let your car start, or a battery that dies overnight, the source of your frustration is likely a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, managing everything from the interior lights and power locks to the anti-theft system. When it fails, it can cause a cascade of confusing and unpredictable issues in your 2007-2009 Pontiac Torrent and many other GM vehicles.
From the Diagnostic Bay
We once had a customer with a GMC Acadia who was on his third new battery in six months. He was convinced he had a bad alternator or a wiring short nobody could find. After installing our programmed BCM, the parasitic drain that was killing his batteries vanished. It wasn’t the battery or the charging system; it was the faulty BCM not allowing the vehicle’s systems to properly go to sleep when turned off.
Common Symptoms of a Failing BCM
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, it’s a strong indicator that your Body Control Module needs replacement:
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Dashboard lights flickering or warning lights (like Airbag or ABS) staying on.
- ✔ The security or anti-theft system light is on, preventing the engine from starting.
- ✔ Headlights, taillights, or interior lights behaving erratically.
- ✔ The horn sounding randomly or not working at all.
- ✔ A persistent parasitic battery drain that kills your battery when the vehicle is parked.
Your Direct Solution: A VIN-Programmed 2007-2009 Torrent Body Control Module
Don’t let a faulty module keep you off the road. This Body Control Module is a direct-fit replacement for your original part, restoring full functionality to your vehicle’s electronics. The critical advantage of ordering from us is that we program the module to your vehicle’s specific VIN before it ships. We use the latest GM software updates, ensuring optimal performance and compatibility. This saves you a costly trip to the dealership and eliminates the need for expensive programming fees. It’s a simple, effective solution designed to get you back on the road quickly.
Installation and Required Procedures
While many installations are straightforward, some vehicles may require additional steps after the new BCM is installed. These are known as relearn procedures and can typically be performed by a qualified technician with a professional diagnostic tool.
- Airbag System Sync: If the airbag warning light appears after installation, a “Setup SDM Primary Key in BCM” procedure is needed to sync the systems. This is only required if the light is on.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper brake light and traction control operation.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for Multiple Part Numbers
This module is a direct replacement for a wide range of original part numbers, including: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.
Frequently Asked Questions
Do I need to get this BCM programmed by a dealer?
No! We program the module to your vehicle’s VIN before shipping. It arrives ready for installation, saving you time and money.
Where is the BCM located on my 2008 Pontiac Torrent?
On the 2007-2009 Pontiac Torrent, the BCM is typically located in the center dash area. The location can vary on other compatible models, so we always recommend verifying with a service manual for your specific vehicle.
What happens if my airbag light is on after I install this?
This may require a simple sync procedure called “Setup SDM Primary Key in BCM” which can be performed by a qualified shop with a professional scan tool. This is only necessary if the light is illuminated post-installation.
Is there a core charge for my old part?
No, there is absolutely no core charge. You can keep your old module.
How do I provide my VIN?
After you complete your purchase, you will need to send us your vehicle’s 17-digit VIN. We cannot ship your part until we receive this information to ensure correct programming.