2007-2009 Equinox BCM 15921352 Body Control Module | Cloning Service

Restore Your Vehicle’s Brain and End Electrical Chaos

Are you chasing electrical gremlins in your 2007-2009 Chevrolet Equinox? Power windows with a mind of their own, intermittent starting issues, or a dashboard lit up with random warning lights are all classic signs of a failing Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a faulty BCM can cause widespread and frustrating problems. This isn’t just an inconvenience; it can affect security and safety systems. This replacement BCM, part number 15921352, is your direct-fit, reliable solution.

We offer a professional cloning service that makes this repair straightforward. Simply send us your original BCM, and we will transfer all the critical data—including your VIN, mileage, and key information—to this replacement unit. The result? A truly plug-and-play module that requires no expensive trip to the dealership for programming. It arrives at your door ready for installation, saving you time and hundreds of dollars.

Is Your Vehicle Showing These Symptoms?

• ✔ Erratic or non-functional power windows, door locks, or interior lights.
• ✔ The security or anti-theft light is on, and the engine won’t start.
• ✔ Horn, wipers, or radio operate unexpectedly.
• ✔ False warnings on the instrument cluster (e.g., ‘Service Airbag’).
• ✔ Communication DTCs (Diagnostic Trouble Codes) like U0100, U0140, or other U-series codes.
• ✔ Inconsistent A/C and climate control operation.

Your Straightforward Installation Guide

1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
2. ✔ Locate the BCM: On the 2007-2009 Equinox, the Body Control Module is typically located in the center dash area. You may need to remove a few trim panels for access.
3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, remove the bolts or clips holding the module in place.
4. ✔ Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all the electrical harnesses.
5. ✔ Reconnect Power: Reattach the negative battery terminal.
6. ✔ Perform Final Checks: Start the vehicle and test all body functions—windows, locks, lights, wipers, and radio—to ensure everything is working correctly. Refer to the post-installation procedures below if needed.

Important Post-Installation Information

While our cloning service makes this a plug-and-play repair, some vehicle systems may require a relearn procedure to sync with the new BCM. This is normal. Your original module will be returned with the replacement unit.

• Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the airbag system with the BCM.
• Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary for proper brake light and traction control functionality.

Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.

Verified Vehicle Compatibility

This module is a direct replacement for part number 15921352 and is interchangeable with a wide range of other part numbers. It fits the following GM vehicles (please verify your specific model and options):

This unit replaces part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.