2007 – 2009 Equinox Body Control Module 25910474 Programmed To Your VIN VIN BCM

Restore Your Equinox’s Electrical System!

Tired of erratic power windows, locks, or a no-start condition? This Body Control Module (BCM) is the solution. It comes fully programmed to your vehicle’s VIN for a simple, plug-and-play installation. Get back on the road without a trip to the dealer. Order yours today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1126 Categories: ,
Guaranteed Safe Checkout

Is Your Equinox Plagued by Electrical Gremlins?

If you’re dealing with a frustrating mix of electrical issues in your 2007-2009 Chevy Equinox—like power windows with a mind of their own, door locks that don’t respond, intermittent starting problems, or a security light that won’t turn off—the Body Control Module (BCM) is the most likely culprit. As the central nervous system for your vehicle’s comfort and convenience features, a failing BCM can make your daily drive a complete nightmare.

From the Shop Floor: “A customer’s 2008 Equinox came in last week with the radio acting up, intermittent no-start, and the power windows working only when they wanted to. They had already replaced the battery and alternator with no luck. After a quick diagnostic, we traced the issue to the BCM. A common failure point on these is water intrusion from a leaky windshield cowl seal, which corrodes the main connector and damages the internal board. It’s a textbook case I’ve seen dozens of times.”

The Direct Solution: A VIN-Programmed BCM

Don’t let a faulty module keep you guessing. This Body Control Module is the definitive solution to restore full functionality to your vehicle. We take the hassle and high cost out of the repair by programming the module specifically to your vehicle’s VIN before we ship it. This means it arrives at your door ready for a straightforward installation, loaded with the latest GM software updates to ensure peak performance and reliability.

Common Symptoms of a Failing 2007-2009 Equinox BCM:

  • ✔ Erratic or non-functional power windows and door locks
  • ✔ Interior lights staying on or not working at all
  • ✔ The security system preventing the engine from starting
  • ✔ Horn honking unexpectedly or not working
  • ✔ Inconsistent A/C and heater blower motor operation
  • ✔ False warnings on the instrument cluster

Plug-and-Play Installation: No Dealer Visit Required

With our pre-programming service, you can bypass the expensive trip to the dealership for flashing. Here’s a general guide to getting your Equinox back in order:

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. Locate the BCM: In the 2007-2009 Equinox, the BCM is typically located in the center of the dashboard, often accessible by removing the radio or center console trim panels.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket.
  4. Install the New Module: Mount your new, pre-programmed BCM in place and securely reconnect all the electrical harnesses. Ensure they click into place.
  5. Reconnect Power: Reattach the negative battery terminal.

Finalizing Your Installation: Important Next Steps

After installing your new BCM, a couple of system handshakes are required to ensure everything works together perfectly. These are standard procedures for this type of repair.

  • Airbag System Reset: The airbag light will likely be on. A scan tool with programming capabilities is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This re-establishes communication between the BCM and the airbag system.
  • Brake Pedal Position Sensor Relearn: Some vehicles require the Brake Pedal Position (BPP) sensor to be recalibrated after a BCM replacement. This ensures accurate brake light operation and stability control function.

Note: While these procedures are often straightforward for a qualified technician with the right tools, we always recommend consulting your vehicle’s service manual or a professional if you are unsure.

Guaranteed Compatibility

This module is a direct replacement for part number 25910474 and is also interchangeable with the following part numbers:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25934762, 25934763, 95151084

This BCM fits a wide range of GM vehicles, including but not limited to: Acadia, Enclave, Traverse, Equinox, Torrent, Vue, Captiva Sport, Impala, Monte Carlo, Lucerne, DTS, CTS, STS, SRX, G8, Hummer H2, and various Express/Savana vans. Please verify your part number to ensure proper fitment.

Genuine OEM

Yes

Condition

Refurbished

MPN

25910474

Interchange part number

PartNumber

591

Model

EQUINOX

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top