2007-2009 Equinox BCM 25892622 | Programmed to Your VIN

Restore Your Equinox’s Electronics!

Fix frustrating electrical issues like flickering lights, dead batteries, and faulty power accessories with this pre-programmed Body Control Module. We flash it to your VIN with the latest GM software, so it’s ready to install out of the box. Order today and get your Equinox working correctly again!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1094 Categories: ,
Guaranteed Safe Checkout

Is Your Equinox Plagued by Electrical Gremlins?

Are you dealing with flickering dashboard lights, power windows with a mind of their own, or a security system that randomly goes off? Maybe your battery keeps dying for no apparent reason. These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it starts to go, it can cause a cascade of frustrating and unpredictable problems. Don’t let a faulty module take control of your vehicle. This is the reliable, straightforward solution you’ve been looking for.

From the Shop Floor: A Real-World Diagnosis

“Just last month, a 2008 Equinox was towed to my shop with a dead batteryโ€”for the third time in two weeks. The owner had already replaced the battery and alternator. After hooking up my multimeter for a parasitic draw test, I saw a significant amp draw even with the key off. By pulling fuses one by one, we isolated the circuit to the BCM. The internal relays were sticking, keeping certain systems powered on and draining the battery overnight. This is a failure I’ve personally diagnosed on hundreds of these GM platforms. Replacing the BCM with a properly programmed unit solved the problem instantly.”

The Plug-and-Play Solution: A Programmed 2007-2009 Equinox BCM

Forget about expensive dealership visits and the hassle of finding a shop that can program a new module. We take care of the most critical step for you. When you order, simply provide us with your vehicle’s VIN, and our technicians will flash this BCM with the latest, most stable GM software specific to your Equinox. It arrives at your door ready to be installed, saving you time, money, and headaches.

  • โœ” VIN-Specific Programming: We load the correct software and settings for your exact vehicle, ensuring seamless communication between all modules.
  • โœ” Eliminate Electrical Faults: Puts an end to issues like erratic lights, non-functional power accessories, and false security alarms.
  • โœ” Solve Parasitic Drains: A common failure mode is a BCM that doesn’t properly go to “sleep,” causing a dead battery. This replacement corrects that issue.
  • โœ” No Dealer Required: This module is prepared for your vehicle, bypassing the need for costly dealer-only programming tools.

Simple Installation Guide

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the system to fully discharge.
  2. Locate the BCM: On the 2007-2009 Equinox, the BCM is typically located in the center dash area. You may need to remove a lower dash panel for access.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old module and remove it.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical harnesses. Ensure they click into place.
  5. Reconnect Battery: Reattach the negative battery terminal.

Important Post-Installation Steps

After installing your new BCM, a couple of final procedures are required to ensure full system functionality. These steps require a bi-directional scan tool.

  • Airbag System Reset: To clear the airbag warning light, you must perform the ‘Setup SDM Primary Key in BCM’ procedure. This re-establishes the security handshake between the BCM and the airbag module (SDM).
  • Brake Pedal Position Sensor: Some vehicles will require a ‘Brake Pedal Position Sensor Calibration’ to ensure the brake lights and stability control systems function correctly.

If you are not comfortable performing these steps, we strongly recommend seeking assistance from a qualified professional technician.

Guaranteed Fitment for Part Number 25892622

This BCM is a direct replacement for a wide range of original equipment part numbers, ensuring compatibility. Please match your original part number to one of the following for guaranteed fitment:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Vehicle Compatibility List

This module fits a wide variety of GM vehicles, including:
EQUINOX 07-09, EXPRESS/SAVANA VANS 08-12, IMPALA 06-13, ACADIA 07-12, MONTE CARLO 06-07, TAHOE/YUKON 10, TRAVERSE 09-12, CAPTIVA SPORT 12, DTS 06-11, OUTLOOK 07-10, SUBURBAN/YUKON XL 10, ESCALADE/ESV/EXT 10, STS 10, TORRENT 07-09, CTS 08-13, G8 08-09, LUCERNE 06-11, SRX 07-09, HUMMER H2 08-09, VUE 08-10, CAPRICE 11-13, ENCLAVE 08-12, and more. Please verify your part number for a perfect match.
Genuine OEM

Yes

Condition

Refurbished

MPN

25892622

Interchange part number

PartNumber

591

Model

EQUINOX

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top