2007-2009 Equinox BCM 15921353 | Cloning Service

Restore Your Equinox’s Electrical Systems with a Reliable Fix

Are you dealing with baffling electrical issues in your 2007-2009 Chevrolet Equinox? Flickering lights, malfunctioning power windows, or a security system that has a mind of its own are more than just annoyances—they’re classic signs of a failing Body Control Module (BCM). The BCM is the central command for your vehicle’s body electronics, and when it starts to go, it can create a cascade of frustrating and unpredictable problems. Instead of paying a fortune for diagnostics and programming at the dealership, get a dependable, plug-and-play solution right here.

This isn’t just a replacement part; it’s a comprehensive cloning service. We transfer the exact data from your original BCM to this replacement unit. This means it arrives at your door perfectly matched to your vehicle’s VIN and specific options, eliminating the need for expensive dealer-only programming tools. It’s the most direct and cost-effective way to get your Equinox back to factory-fresh functionality.

A Technician’s Notebook: The Case of the Haunted Equinox

I remember a 2008 Equinox that came into my shop last winter. The owner was at her wit’s end. The dome lights would randomly turn on while driving, the power locks would cycle on their own, and sometimes the radio wouldn’t shut off even after she took the key out. She’d already replaced the battery and checked the fuses. After connecting my scan tool, I saw multiple communication loss codes (U-codes) pointing to the BCM. Instead of a costly new module and programming session, we performed a cloning service just like this one. She sent us her old BCM, we cloned it, and sent both back. She installed the new one herself in under an hour. The ‘haunting’ stopped immediately, and all systems returned to normal. It’s a common failure, and this service is the most efficient fix I’ve found in 20 years.

Is Your Equinox Showing These Symptoms?

A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, your 2007-2009 Equinox BCM is the likely culprit:

✔ Erratic or non-functional power windows, door locks, and mirrors.
✔ Interior or exterior lights that flicker, stay on, or don’t work at all.
✔ The security or anti-theft light stays illuminated, preventing the vehicle from starting.
✔ Intermittent issues with the radio, climate controls, or instrument cluster gauges.
✔ Communication error codes, such as U0100, U0140, or other U-series codes.
✔ False warnings on the driver information center (e.g., ‘Service Airbag’ or ‘Service StabiliTrak’).

A Straightforward Guide to Installation

Installing your cloned BCM is a manageable job for a confident DIYer. Here is a general guide to get you started:

Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
Locate the BCM: On the 2007-2009 Equinox, the Body Control Module is typically located behind the center of the dashboard, often accessible by removing the radio or center stack trim panels.
Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely re-attach the electrical connectors. You should hear a ‘click’ as they lock into place.
Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—windows, locks, lights, radio, etc.—to confirm the repair.
Perform Relearns (If Needed): In some cases, you may see an airbag light or have brake system messages. Follow the post-installation procedures outlined below if these specific issues arise.

Post-Installation Procedures

Our cloning service makes this process nearly plug-and-play. However, on some GM vehicles, you may need a professional scan tool to perform these final sync procedures:

Airbag System Sync: If the airbag light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required to sync the airbag system. This ensures the safety system is fully operational.
Brake Pedal Position Relearn: A brake pedal position sensor relearn might be necessary to ensure correct brake light operation and to clear any traction control or stability system warnings.

Disclaimer: Vehicle systems vary. Always have a factory service manual for your specific model on hand for detailed instructions and torque specs.

Verified Vehicle Compatibility

This BCM and cloning service is compatible with a wide range of GM vehicles. Please verify your part number is on our cross-reference list and that your model and year are listed below. The primary listing is for the 2007-2009 Equinox BCM, but it also fits:

EQUINOX 07-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
ACADIA 07-12 Body Control (BCM); (LH dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
IMPALA 06-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
…and many other GM cars, trucks, and vans as listed in the original fitment data. Please cross-reference your part number (10382479, 15093910, 15921353, etc.) to ensure a perfect match.