2007-2009 Equinox BCM 15880684 Body Control Module | Cloning Service

End Your Electrical Nightmares

Tired of flickering lights, faulty power locks, or a stubborn anti-theft system in your Chevy Equinox? Our pre-programmed Body Control Module (BCM) is the definitive fix. Thanks to our expert cloning service, this module arrives ready for a simple, plug-and-play installation—no dealership programming required. Restore your vehicle’s full functionality and peace of mind. Order today to get your Equinox working like new again!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-581 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM

If you’re dealing with bizarre electrical issues in your 2007-2009 Chevrolet Equinox—like power windows with a mind of their own, flickering dashboard lights, or a security system that prevents your car from starting—you’ve likely met the culprit: a failing Body Control Module (BCM). As a technician with over two decades of experience, I’ve seen how a faulty BCM can turn a reliable vehicle into a source of daily frustration. It acts as the central hub for your car’s comfort and convenience features, and when it goes, chaos often follows.

This isn’t just a replacement part; it’s a complete, hassle-free solution. We offer a professional Cloning Service that makes this repair accessible to everyone, from seasoned mechanics to first-time DIYers. Simply send us your original BCM, and we will transfer all of its critical data—including key programming and vehicle-specific options—to this fully tested replacement unit. The module you receive back will be plug-and-play, eliminating the need for expensive dealership visits for programming. We’ll even send your original module back with the replacement.

From the Diagnostic Bay: The Case of the Haunted SUV

A customer brought in a 2008 Equinox with a list of complaints that sounded like something out of a ghost story. The dome lights would stay on, the radio would randomly shut off, and the key fob worked only intermittently. They had already replaced the battery and checked all the fuses. After connecting my scan tool, I found a series of U-codes (communication errors) pointing to the BCM. Instead of quoting them a massive bill for a new module and hours of programming at the dealer, we opted for a cloned BCM. Within a day, they had a plug-and-play module. The installation took them less than 30 minutes, and every single electrical gremlin was gone. It’s a perfect example of how the right part and service can save hundreds of dollars and a major headache.

Is Your Equinox Exhibiting These Electrical Gremlins?

A failing BCM doesn’t always trigger a check engine light. Instead, it creates a pattern of strange electrical behavior. Here are the common signs I’ve seen in my shop:

  • âś” Power windows or door locks operating erratically or not at all.
  • âś” Interior or exterior lights flickering, staying on, or not turning on.
  • âś” The security or anti-theft system light is on, causing a no-start condition.
  • âś” Keyless entry remote stops working reliably.
  • âś” Instrument cluster gauges behaving erratically or going dark.
  • âś” Communication error codes stored in the system (e.g., U0140, U0155).

Your Step-by-Step BCM Replacement Guide

Installing your cloned 2007-2009 Equinox BCM is a straightforward process. With our cloning service, you won’t need any special programming tools.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
  2. Locate the BCM: In the 2007-2009 Equinox, the Body Control Module is typically located behind the center dash, often near the glove box or center console area. Access may require removing a few trim panels.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be pressed. Once disconnected, unbolt the module from its mounting bracket.
  4. Install the New Module: Mount the new, cloned BCM in the same location and securely fasten it. Reconnect all electrical connectors, ensuring they click into place.
  5. Reconnect Power: Reattach the negative battery terminal.
  6. Test All Functions: Start the vehicle and test all the features controlled by the BCM: lights, windows, locks, wipers, and radio to confirm the repair was successful.

Post-Installation Checks

While our cloning service makes this a near plug-and-play repair, some vehicle systems may require a simple relearn procedure to sync properly. These are often not required, but it’s good to be aware of them:

  • Airbag System Sync: If your airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure brake lights and traction control function correctly.

Disclaimer: Vehicle systems vary. Always have a factory service manual available for your specific model for detailed instructions and torque specs.

Confirmed Vehicle Compatibility List

This Body Control Module is a direct fit for a wide range of General Motors vehicles. Please verify your part number against our list to ensure compatibility. This module replaces part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, and many more.

EQUINOX 07-09 Body Control (BCM); (center dash)
TORRENT 07-09 Body Control (BCM); (center dash)
ACADIA 07-12 Body Control (BCM); (LH dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
IMPALA 06-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
…and many other GM cars, trucks, and vans. Please see the full fitment list provided.

Frequently Asked Questions

How does the cloning service work?

After you place your order, you will ship your original BCM to us. Our technicians will extract the vehicle-specific data and flash it onto the replacement module. We then ship both your original module and the ready-to-install replacement back to you.

Do I need to provide my VIN?

While the cloning process is the primary method, providing your VIN helps us double-check for the latest software updates available from GM for your specific vehicle, ensuring optimal performance.

Is this a difficult part for a DIYer to install?

For most models, like the 2007-2009 Equinox, the BCM is accessible behind the dash with basic hand tools. Because our service makes the part plug-and-play, it’s one of the easier module replacements you can perform.

What if my old BCM is completely dead or ‘fried’?

In many cases, even if the BCM is non-functional, we can still recover the necessary data. If data recovery is not possible, we will contact you to discuss options, which may involve programming with your vehicle’s VIN.

Do you keep my old BCM?

No, we do not require a core. Your original module is always returned to you along with the programmed replacement unit.

Genuine OEM
Condition
MPN

15880684

Interchange part number
PartNumber
Model

EQUINOX

Year
Brand
Manufacturer Part Number
Scroll to Top