Restore Peak Performance to Your Vehicle
Is your 2007-2008 Chrysler Sebring or 2008 Dodge Avenger suffering from frustrating issues like stalling, a persistent check engine light, or a complete failure to start? These are classic signs of a failing Engine Control Module (ECM), the central computer that manages your engine’s performance, fuel economy, and emissions. A faulty ECM can make your vehicle unreliable and unsafe. This direct-fit replacement ECM is the definitive solution to get your car back on the road, running smoothly and efficiently without a costly trip to the dealership.
From the Diagnostic Bay
We recently had a 2008 Sebring with the 2.7L V6 towed into the shop. The owner was frustrated because it would crank strong but never fire up. He had already replaced the spark plugs and a coil pack with no success. Our initial scan showed no communication with the engine computer. After verifying all power and ground circuits to the module were intact, we diagnosed a complete internal failure of the ECM. Instead of a complicated and expensive dealer replacement, we installed one of our pre-programmed units. After connecting the battery and turning the key, the car started instantly and ran perfectly. This is the simple, effective solution we provide directly to you.
Common Symptoms of a Failing ECM
- ✔ Persistent Check Engine Light (CEL) illuminated on your dash.
- ✔ Engine stalling, sputtering, or running rough.
- ✔ Complete no-start condition where the engine cranks but won’t turn over.
- ✔ A noticeable decrease in fuel efficiency.
- ✔ Hesitation or stumbling during acceleration.
- ✔ Communication error codes when using a diagnostic scan tool.
- ✔ Erratic automatic transmission shifting behavior.
Why Choose Our Pre-Programmed 2007-2008 Sebring ECM?
The engine computer is the brain of your vehicle, and replacing it used to be a complex job requiring specialized tools for programming. We eliminate that hassle. This module is not just a part; it’s a complete, ready-to-install solution. We flash the unit with the latest software updates from the manufacturer and program it specifically to your vehicle’s unique Vehicle Identification Number (VIN). This ensures that it communicates perfectly with your car’s other electronic systems, including the ignition and anti-theft (SKIM) system. The result is a true Plug & Play installation. Simply disconnect the old module, connect this one, and you’re done.
Guaranteed Fitment and Compatibility
This Electronic Control Module is a direct replacement for vehicles equipped with the 2.7L or 3.5L engine. It is guaranteed to fit the following models:
- 2007-2008 Chrysler Sebring (2.7L & 3.5L engines)
- 2008 Dodge Avenger (2.7L & 3.5L engines)
This unit is a direct replacement for a wide range of original part numbers, ensuring a perfect match for your vehicle. Please verify that one of the following part numbers is listed on your original module:
05033708AD, 05033708AE, 05033707AJ, 05033708AF, 05094721AA, 05094721AB, 05094721AC, 05094721AE, 05094721AG, 05094721AH, 05094721AI, 05094721AJ, 05094721AK, 05094721AL, 05094721AM, 05094721AN, 05150157AH, 05094721AO, 05094858AA, 05094858AC, 05094858AD, 05094858AE, 05094858AF, 05187343AF, 05150245AC
Frequently Asked Questions
Is this ECM really “Plug & Play”?
Yes, absolutely. We program the module to your car’s specific VIN before shipping. This means it will work immediately upon installation with no additional programming or dealer visits required. It’s designed to be a simple, DIY-friendly solution.
What information do you need from me to program it?
After you place your order, we will need your vehicle’s 17-digit VIN. This is typically found on your driver’s side door jamb sticker or visible through the windshield on the driver’s side dashboard. This ensures a perfect software match for your car’s specific configuration.
Will this fix my car’s problem for sure?
This part will correct any issues directly caused by a faulty ECM. While the symptoms listed are very common for ECM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the ECM is the root cause of your problem before ordering.
Where is the ECM located on a 2007-2008 Sebring?
On the 2007-2008 Chrysler Sebring and 2008 Dodge Avenger, the ECM is typically located in the engine bay, on the driver’s side, near the firewall or shock tower. It’s a silver metal box with several large electrical connectors.
Do I need to do a key relearn procedure?
No. Because we program the module with your VIN, it will recognize your existing keys. No special key relearn or security procedures are necessary.