2007-2008 SAAB 9-7X Engine Control Module ECM 12607096

Restore Your SAAB’s Drivability

Get your 2007-2008 SAAB 9-7X running like new with our pre-programmed Engine Control Module. This ECM comes flashed to your vehicle’s specific VIN with the latest GM software, ensuring a perfect, plug-and-play fit. Eliminate stalling, rough idle, and check engine lights. Order now to restore your vehicle’s performance and reliability.

$118.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08112-187 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your SAAB 9-7X

Is your 2007-2008 SAAB 9-7X suffering from frustrating and unpredictable issues? Seemingly random stalling, a persistent check engine light, rough idling, or a complete no-start condition can often be traced back to a single, critical component: the Engine Control Module (ECM). As the central computer of your vehicle, the ECM is responsible for managing everything from fuel mixture and ignition timing to transmission shifting and emissions control. When it begins to fail, the symptoms can be widespread and difficult to diagnose, leading to costly and unnecessary repairs.

This replacement Engine Control Module, part number 12607096, is the definitive solution to restore your vehicle’s factory performance and reliability. We take the guesswork and hassle out of the replacement process. Unlike a generic unit from a salvage yard, each module we ship is professionally programmed with the latest GM software updates specifically for your vehicle. By providing us with your Vehicle Identification Number (VIN) during checkout, you receive a component that is truly plug-and-play, tailored to your SAAB’s exact specifications.

From the Diagnostic Bay

We had a 2008 SAAB 9-7X with the 5.3L V8 come into the shop with a ghost of a problem. The owner complained of intermittent stalling at traffic lights and a strange hesitation during acceleration that no one could pinpoint. We checked the fuel pump, scanned for codes (which were intermittent and varied), and inspected the wiring. Everything seemed fine. On a hunch, we monitored the live data from the ECM and noticed occasional, erratic sensor readings that didn’t match reality. We swapped in a VIN-programmed ECM, and the problems vanished instantly. The internal processor on the original unit was failing under thermal load, a classic sign of ECM failure that can be a nightmare to diagnose without simply replacing the part.

Is Your SAAB 9-7X Engine Control Module Failing?

A faulty ECM can manifest in numerous ways. If you’re experiencing any of the following issues, a failing computer is a likely culprit. This direct-fit SAAB 9-7X Engine Control Module is designed to resolve these problems and get you back on the road with confidence.

  • ✔ Check Engine Light: The light is on, and you may have codes related to sensors, misfires, or communication errors (U-codes).
  • ✔ Engine Stalling: The engine cuts out unexpectedly while driving or when coming to a stop.
  • ✔ No-Start Condition: The engine cranks but refuses to start, even with a good battery and fuel supply.
  • ✔ Poor Fuel Economy: A sudden and unexplained drop in your vehicle’s gas mileage.
  • ✔ Rough Idle or Misfires: The engine runs erratically, shakes, or misfires, indicating incorrect fuel or spark control.
  • ✔ Transmission Problems: Harsh or delayed shifting, as the ECM plays a key role in communicating with the transmission control module.
  • ✔ Failed Emissions Test: Inability to pass a smog check due to ECM-related faults.

The Plug-and-Play Advantage

Our service sets us apart. Replacing an ECM isn’t just about swapping hardware; it’s about ensuring the software is a perfect match. Your SAAB 9-7X has specific calibrations for its engine, transmission, and options. We flash this module with your VIN, ensuring it communicates flawlessly with all other systems in your vehicle right out of the box. This eliminates the need for expensive programming services at a dealership or specialized shop. After a simple security relearn procedure (which you can often do yourself), your vehicle will be ready to go.

This module is a direct replacement for service number 12607096 and is also interchangeable with the following part numbers, ensuring wide compatibility:

  • 12590032
  • 12602044
  • 12603530
  • 12605843
  • 12607096
  • 12630457
  • 19210737

Don’t let a failing ECM keep your SAAB off the road. Order this pre-programmed SAAB 9-7X Engine Control Module today and restore the smooth, reliable performance you expect from your vehicle.

Frequently Asked Questions

Do I need to do any programming after I receive this ECM?

No dealership programming is required. We flash the unit with your vehicle’s VIN and the latest GM software before shipping. You may need to perform a simple security relearn procedure, which typically involves turning the key on and off in a specific sequence. Instructions are readily available online or in your owner’s manual.

What happens if I don’t provide my VIN?

Providing your VIN is mandatory for this part. We cannot program and ship the module without your vehicle’s specific VIN. This ensures the ECM is a perfect match for your engine, transmission, and factory options, guaranteeing a plug-and-play installation.

Where is the ECM located on my 2007-2008 SAAB 9-7X?

On the SAAB 9-7X, the Engine Control Module is typically located in the engine bay, on the driver’s side (LH engine). It is a silver metal box with multiple large electrical connectors. Always disconnect the battery before attempting to remove or install the module.

Will this fix my check engine light?

If the check engine light and associated diagnostic trouble codes are caused by a faulty ECM, this replacement part will solve the issue. However, it’s crucial to ensure that the underlying problem isn’t a faulty sensor or wiring issue. This ECM corrects internal computer faults, not external circuit problems.

Is this compatible with other GM vehicles?

Yes, this ECM hardware fits a very wide range of GM trucks and SUVs from this era, including the Chevy Trailblazer, GMC Envoy, and Isuzu Ascender. However, the programming is specific to the vehicle. This listing is for a unit programmed specifically for the 2007-2008 SAAB 9-7X.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

12607096

Interchange part number

PartNumber

590

Model

SAAB 9-7X

Year

2009

Brand

GM

Manufacturer Part Number

, , , , ,

Hardware Type

Scroll to Top