Is Your 2006 Chrysler Town & Country or Dodge Caravan Running Poorly?
It’s frustrating when your reliable family minivan starts acting up. Intermittent stalling, a persistent check engine light, rough idling, or a complete failure to start can disrupt your daily life. These are classic signs that the heart of your vehicle’s management system—the Engine Control Module (ECM)—may be failing. The ECM, often called the engine computer, is the central brain responsible for managing everything from fuel injection and spark timing to transmission shifting and emissions control. When it falters, the entire vehicle’s performance suffers.
Don’t let a faulty computer keep you off the road. This is a direct replacement for your original module, solving the complex electronic issues that plague these vehicles. We provide a reliable and straightforward solution to get your minivan running smoothly again.
Expert Pro Tip
Before you replace your ECM, always perform a full diagnostic check. A common issue that mimics ECM failure is a poor ground connection or a failing battery. Use a multimeter to verify you have a solid 12 volts at the battery and check the main engine and chassis ground straps for corrosion or looseness. A weak or intermittent ground can cause erratic behavior that can easily be misdiagnosed as a faulty computer, saving you time and money.
Symptoms of a Failing Engine Computer
A failing ECM can manifest in numerous ways. If you’re experiencing any of the following issues with your 2006 Town & Country or Caravan, it’s highly likely the engine computer is the culprit:
- ✔ Check Engine Light is on or flashing with various trouble codes.
- ✔ Vehicle refuses to start or has difficulty starting.
- ✔ Engine stalls unexpectedly while driving or at idle.
- ✔ Noticeable decrease in fuel economy.
- ✔ Rough or erratic engine idling.
- ✔ Hesitation or stumbling during acceleration.
- ✔ Automatic transmission shifts harshly or at the wrong times.
- ✔ Communication errors with diagnostic scan tools.
The Plug-and-Play Solution for Your 2006 Town & Country Engine Computer
The biggest hurdle in replacing an engine computer has always been the expensive and time-consuming programming required at a dealership. Our solution eliminates that step entirely. This 2006 Town & Country Engine Computer arrives at your door fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This means the immobilizer and security keys are already synced, and all factory settings are correctly configured for your minivan’s 3.3L or 3.8L engine. The process is simple:
- Place your order: Provide us with your vehicle’s VIN during checkout.
- Receive your part: We program the module and ship it directly to you.
- Install the module: Simply disconnect the battery, remove the old ECM (located on the LH fender), and install the new one. Reconnect the battery, and you’re done.
There is absolutely no additional programming or dealer intervention required. This is a true Plug-and-Play installation that a competent DIY mechanic can perform in their own driveway, saving hundreds of dollars in labor and programming fees.
Guaranteed Compatibility
This module is a direct replacement for a wide range of original part numbers, ensuring a perfect match for your vehicle. It is compatible with the following part numbers: 05094650AC, 05094650AD, 05187758AA, 05187758AB, 05187758AC, 05094658AA, 05094658AB, 05094658AC, 05094658AD, 05094658AE, 05094658AF, 05094675AA, 05094675AB, 05094675AC, 05094675AD, 05094675AE, 05094659AB, 05094659AC, 05094659AD, 05094659AE, 05187756AA, 05187756AB, and 0518775. It is specifically designed for:
- 2006 Chrysler Town & Country with 3.3L or 3.8L engines
- 2006 Dodge Caravan with 3.3L or 3.8L engines
By purchasing this pre-programmed 2006 Town & Country Engine Computer, you are choosing the fastest, most reliable, and most cost-effective way to resolve your vehicle’s electronic issues and restore its factory performance. Get back on the road with confidence.
Frequently Asked Questions
Do I need to have this computer programmed by a dealer?
No. This engine computer comes fully programmed to your vehicle’s VIN. It is a 100% plug-and-play solution, requiring no further programming or dealer visits. Just install it, and you’re ready to go.
What information do you need from me?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) at the time of purchase. This allows us to program the module with the correct software and security information for your specific Town & Country or Caravan.
Where is the ECM located on my 2006 Town & Country?
The Electronic Control Module (ECM) is located in the engine bay, mounted to the driver’s side (LH) fender, near the battery and air filter box. It is a silver metal box with three large electrical connectors.
Will my original keys work with this replacement module?
Yes! Because we program the module to your VIN, it is synced with your vehicle’s existing immobilizer system. Your original keys will work exactly as they did before, with no need for reprogramming.
What is the difference between an ECM, ECU, and PCM?
These acronyms are often used interchangeably. ECM (Engine Control Module) and ECU (Engine Control Unit) typically refer to the same part. PCM (Powertrain Control Module) is a term for a module that controls both the engine and the transmission. For this specific vehicle, the terms all refer to this one central computer.