Is Your 2006 Sebring or Stratus Experiencing Critical Engine Problems?
A failing Engine Control Module (ECM), often called the engine computer, is one of the most frustrating issues a vehicle owner can face. As the central command center for your engine’s performance, fuel delivery, and emissions, its failure can lead to a host of problems that can mimic other component failures, leading to costly and incorrect repairs. If your 2006 Chrysler Sebring or Dodge Stratus with the 2.4L engine is stalling, refusing to start, or running erratically, a faulty ECM is a likely culprit. This replacement module is the definitive solution, arriving pre-programmed to your vehicle’s specific VIN for a hassle-free, plug-and-play installation.
From the Diagnostic Bay
We had a 2006 Dodge Stratus towed in that was driving the owner crazy. It would crank strong but would never fire up. He had already replaced the spark plugs, ignition coils, and even the crankshaft position sensor, but nothing worked. Our initial scan showed a complete lack of communication with the engine module. After verifying the ECM had proper power and ground, we knew the module itself was the issue. It wasn’t sending the signals for spark or fuel injection. We installed one of these pre-programmed units, and the car fired up on the first try and idled perfectly. It turned a week-long headache into a 15-minute fix.
Common Symptoms of a Failing 2006 Sebring Engine Computer
- ✔ Check Engine Light: The light is on, often with communication-related fault codes (U-codes) or multiple random sensor codes.
- ✔ No-Start Condition: The engine will turn over (crank) but will not start due to a lack of spark or fuel injector signal.
- ✔ Poor Performance: You may experience rough idling, engine stalling, hesitation during acceleration, or a significant loss of power.
- ✔ Reduced Fuel Economy: A faulty ECM can’t properly manage the air-fuel mixture, leading to a noticeable drop in MPG.
- ✔ Transmission Problems: The ECM works with the transmission controller, and a failure can cause harsh shifting, getting stuck in gear, or other shifting abnormalities.
- ✔ Apparent Component Failure: The module may fail to operate ignition coils or fuel injectors, making it seem like those parts have failed when they haven’t.
The Plug-and-Play Solution
The biggest obstacle to replacing an engine computer has always been the need for expensive programming at a dealership. This module eliminates that step entirely. We handle the complex programming for you. By providing us with your vehicle’s 17-digit VIN and current mileage during checkout, we can flash the module with the correct factory software and security information. When it arrives at your door, it’s ready for immediate installation. Simply disconnect the battery, swap the old module with the new one, reconnect the battery, and start your car. No special tools, no trips to the dealer, no hidden fees.
Guaranteed Fitment & Compatibility
This module is a direct-fit replacement for your 2006 Chrysler Sebring or 2006 Dodge Stratus equipped with the 2.4L engine. It is compatible with both sedan and convertible body styles for the Sebring.
This unit replaces the following part numbers:
- 05094316AC
- 05094316AD
- 05094305AF
- 05094308AF
By ordering this part, you are getting a reliable and correctly configured component that will restore your vehicle’s performance and get you back on the road with confidence.
Frequently Asked Questions
Is this 2006 Sebring Engine Computer truly “Plug and Play”?
Yes, absolutely. We program the module using your vehicle’s specific VIN before it ships. This critical step ensures it communicates perfectly with your car’s anti-theft system, gauges, and other electronics. Once installed, no further programming is required.
Where is the ECM located on my 2006 Sebring or Stratus?
The Engine Control Module is typically found in the engine compartment. Look for a silver metal box with three large electrical connectors, usually mounted against the firewall or on one of the inner fender wells. Always disconnect the negative battery terminal before you begin the replacement process.
Will my original keys work with this replacement computer?
Yes. Because we flash the module with your vehicle’s VIN, we also program the security data. This means your original keys will be recognized by the security system, and the car will start without any key relearning procedures.
How do I provide my VIN and mileage for programming?
After you complete your purchase, our system will prompt you to enter your 17-digit Vehicle Identification Number (VIN) and your vehicle’s current mileage. Please double-check this information for accuracy, as it is essential for a successful programming.
What causes an engine computer to fail?
ECM failure can be caused by several factors, including electrical shorts, excessive heat, vibration over many years, or water intrusion. A voltage spike from a bad alternator or improper jump-starting can also damage the delicate internal circuits.