2006 Impala Engine Control Module ECM 12590032

Restore Your Impala’s Performance!

Get your 2006 Impala running smoothly again with our VIN-programmed Engine Control Module. This direct-fit ECM arrives ready to install, saving you a trip to the dealer. Provide your VIN at checkout and we’ll handle the rest!

$141.74

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08112-18 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your Vehicle

Is your 2006 Chevrolet Impala or other GM vehicle suffering from perplexing issues like a persistent check engine light, rough idling, stalling, or poor fuel economy? These are classic signs of a failing Engine Control Module (ECM). The ECM is the brain of your vehicle’s engine, managing everything from fuel injection and ignition timing to emissions control. When it falters, the entire system’s performance and reliability are compromised. This replacement Engine Control Module, service number 12590032, is the definitive solution to get your car back on the road and running like new.

We take the guesswork and hassle out of the repair process. Unlike a generic module from a parts store or salvage yard, this unit is professionally programmed specifically for your vehicle. Simply provide us with your Vehicle Identification Number (VIN) after your purchase, and our technicians will flash the module with the latest, most stable software updates directly from General Motors. This ensures perfect communication between the ECM and all other vehicle systems, restoring factory performance and efficiency right out of the box.

From the Diagnostic Bay
We had a 2006 Monte Carlo come in with an intermittent no-start condition that was driving the owner crazy. It would be fine for weeks, then suddenly refuse to start, only to fire right up an hour later. We checked the battery, starter, and fuel pump—all were fine. After hours of tracing wires, we hooked up a scope to the ECM’s power and ground circuits. We noticed that during the no-start events, the ECM’s internal voltage regulator was dropping out. A replacement, VIN-programmed ECM like this one solved the problem permanently. It’s a reminder that these intermittent electronic gremlins often trace back to the main computer.

Common Symptoms of a Failing ECM

  • ✔ Persistent Check Engine Light (CEL) that won’t clear or returns immediately.
  • ✔ Engine stalling or shutting off unexpectedly while driving.
  • ✔ Rough or erratic idling and poor engine performance.
  • ✔ Difficulty starting the engine or a complete no-start condition.
  • ✔ Noticeable decrease in fuel efficiency.
  • ✔ Hesitation or stumbling during acceleration.
  • ✔ Transmission shifting problems or harsh shifts.
  • ✔ Communication errors with diagnostic scan tools.

The Right Solution: A Pre-Programmed 2006 Impala Engine Control Module

Don’t risk installing an incorrect or non-programmed module. Our process guarantees compatibility. This module is a direct replacement for a wide range of GM vehicles and is interchangeable with several service numbers, including 12590032, 12602044, 12603530, 12605843, 12607096, 12630457, and 19210737. By programming it to your VIN, we ensure it has the correct calibration for your specific engine, transmission, and emissions equipment. This eliminates the need for an expensive trip to the dealership for programming, saving you both time and money.

Installation is straightforward for a DIY mechanic or any professional technician. On the 2006 Impala, the ECM is conveniently located in the lower part of the air cleaner box. Once installed, you may need to perform a simple security relearn procedure (often called a ‘key-on/key-off’ cycle), which can be done without any special tools. This process syncs the new ECM with your vehicle’s anti-theft system.

Frequently Asked Questions

Do I need to program this ECM?

No. We handle all the programming for you before shipment. Just provide your vehicle’s VIN during or after checkout, and it will arrive ready for installation.

What information do you need from me?

We need your 17-digit Vehicle Identification Number (VIN) to load the correct GM-certified software for your car’s specific configuration.

Where is the ECM located on a 2006 Impala?

The Engine Control Module is typically found inside the lower portion of the air cleaner filter box in the engine bay.

Will this fix my check engine light?

If the check engine light and associated codes are caused by a faulty ECM, this part will resolve the issue. It’s crucial to have a proper diagnosis to confirm the ECM is the point of failure.

Is any additional setup required after installation?

In most cases, a simple security relearn procedure is required to sync the new ECM with your vehicle’s anti-theft system. This procedure typically takes about 30 minutes and does not require special tools. Instructions are readily available online or in service manuals.

Is this part compatible with other vehicles?

Yes, this ECM is compatible with a very wide range of GM vehicles from approximately 2005-2010, including models from Buick, Cadillac, Pontiac, Saturn, GMC, and more. Please review the detailed fitment list on this page to confirm compatibility with your specific vehicle.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

12590032

Interchange part number

PartNumber

590

Model

IMPALA

Year

2009

Brand

GM

Manufacturer Part Number

, , , , ,

Hardware Type

Scroll to Top