2006 GMC Envoy Engine Control Module 12597521 Programmed To Your VIN VIN ECM PCM ECU

One-year replacement warranty

*See fitment in the description for exact vehicle fitment*

$184.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00320-23 Categories: ,
Guaranteed Safe Checkout

2006 GMC Envoy Powertrain Control Module (PCM) 12597521 – Programmed to Your VIN

Struggling with erratic engine behavior in your 2006 GMC Envoy? Imagine hitting the trail only to face sudden stalling or a persistent check engine light that kills your drive. As a seasoned automotive repair advisor with decades in diagnostics, I’ve seen how a faulty powertrain control module can turn a reliable SUV into a headache. This pre-programmed PCM, part number 12597521, arrives ready for your vehicleโ€”flashed with the latest GM updates using your VIN for exact matching. Let’s dive into how it restores smooth performance and gets you back on the road confidently.

Key Features & Benefits

This powertrain control module stands out for its precise programming tailored to your 2006 GMC Envoy. We use your VIN to ensure it integrates seamlessly, incorporating fresh GM calibrations that address known software glitches. It’s compatible with a range of part numbers including 12569773, 12588650, 12589311, and more up to 19209821, making it a versatile replacement option.

  • Enhanced Engine Management: Optimizes fuel delivery and ignition timing for better efficiency and power, especially under load like highway merging.
  • Updated Firmware: Includes fixes for common electronic glitches, reducing the risk of random shutdowns during daily commutes.
  • Direct Fit: No need for dealer visits; it’s programmed before shipping, saving you time and hassle.
  • Durability Boost: Helps prevent overheating issues in the 4.2L engine by refining cooling system controls.

From my experience, owners often notice improved throttle response after installation, turning sluggish acceleration into responsive handlingโ€”ideal for those weekend adventures.

Common Issues & How This Fixes Them

Powertrain control modules in the 2006 GMC Envoy frequently fail due to electrical surges, corrosion, or age-related wear, triggering symptoms like rough idling, poor fuel economy, or failure to start. I’ve diagnosed countless cases where DTCs such as P0606 (ECM/PCM processor fault) or P2135 (throttle position sensor correlation) light up the dash, often after exposure to moisture or extreme temperatures.

For instance, if your Envoy hesitates during acceleration on wet roads, it could stem from a corrupted module misreading sensor data. This replacement PCM resolves that by recalibrating inputs for accurate processing, clearing those codes and restoring normal operation. Another scenario: intermittent no-start conditions after sitting overnight. The updated programming stabilizes voltage regulation, preventing such frustrations.

Expert tip: Before swapping, scan for codes with an OBD-II tool. If you see P0120 or similar, this module often fixes it without chasing other components. In my shop days, replacing the PCM cut diagnostic time in half for Envoy owners facing transmission shift delays tied to faulty communication.

Easy Installation Guide

Installing this PCM is straightforward for DIY enthusiasts or pros. Locate it on the left-hand engine side in your 2006 GMC Envoy (or right-hand firewall in similar models). Tools needed: basic socket set, screwdriver, and battery disconnect.

  1. Disconnect the battery to avoid shorts.
  2. Remove the old module by unplugging connectors and unbolting it.
  3. Install the new PCM, reconnect everything securely.
  4. Reconnect the battery and clear any stored codes with a scanner.
  5. Test drive to confirm smooth running.

Pro advice: Double-check connections to prevent loose wiring, a common post-install gremlin. If issues persist, it might point to related sensorsโ€”I’ve guided many through this to avoid repeat visits.

Fitment Details

This PCM fits your 2006 GMC Envoy with the 4.2L engine (left-hand engine mount). It also works across compatible vehicles for broader appeal:

  • 2004-2006 Chevrolet Colorado (right-hand firewall)
  • 2006 Buick Rainier (left-hand engine, 4.2L)
  • 2006 Hummer H3 (right-hand firewall)
  • 2006 Isuzu Ascender (left-hand engine, 4.2L)
  • 2006 Isuzu i-350 (right-hand firewall)
  • 2006 Chevrolet TrailBlazer (left-hand engine, 4.2L)
  • 2006 Chevrolet TrailBlazer EXT (left-hand engine, 4.2L)
  • 2006 GMC Envoy XL (left-hand engine, 4.2L)
  • 2006 Isuzu i-280 (right-hand firewall)
  • 2006 Saab 9-7X (left-hand engine, 6-cylinder, IDs 12569773 or 12597521)
  • 2004-2006 GMC Canyon (right-hand firewall)

Compatible with: 2006 GMC Envoy. Verify part numbers and provide your VIN for precise programming confirmation.

Don’t let a failing PCM sideline your Envoy any longer. Order now, supply your VIN, and experience reliable performance againโ€”your next trip awaits!

Condition

Refurbished

Genuine OEM

Yes

MPN

12597521

Brand

GM

Year

2006

Model

ENVOY

Hardware Type

Interchange part number

Manufacturer Part Number

, , ,

Scroll to Top