2006 Equinox Powertrain Control Module PCM 19210070 Programmed to Your VIN

Restore Your Vehicle’s Performance!

Fix stalling, rough running, and shifting problems in your 2006 Equinox with this direct-fit Powertrain Control Module. It arrives pre-programmed to your vehicle’s VIN with the latest GM software, saving you a trip to the dealer. Get back on the road fastโ€”order yours today!

$114.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00140-15 Categories: ,
Guaranteed Safe Checkout

Is Your 2006 Equinox Acting Up? Let’s Talk About the Brains of the Operation.

As a technician with over two decades of experience under the hood, I’ve seen it all. When a mid-2000s GM vehicle like your 2006 Equinox starts showing bizarre symptomsโ€”erratic shifting, stalling for no reason, or a check engine light that just won’t quitโ€”my diagnostic path often leads to one critical component: the Powertrain Control Module, or PCM. This isn’t just another part; it’s the central computer managing everything from your fuel mixture to your transmission’s shift points. When it fails, the symptoms can be confusing and frustrating.

A Technician’s Real-World Story

“A customer’s 2006 Equinox came in last week with these exact symptoms. It would randomly refuse to shift out of second gear, and the engine would sometimes die at a stoplight. They had already replaced a few sensors with no luck. After connecting my scan tool, I found multiple communication loss codes (U-codes) pointing to an internal PCM fault. We confirmed the module had good power and ground, which sealed the diagnosis. The PCM itself was the culprit. It’s a classic failure mode I’ve diagnosed hundreds of times on this platform.”

The Right Solution: A Pre-Programmed PCM

Replacing a PCM isn’t as simple as swapping a battery. A new or used module from a salvage yard is essentially a blank slate. It needs to be programmed with your vehicle’s specific Vehicle Identification Number (VIN) and the latest GM software calibrations to function correctly. This typically means a costly trip to the dealership and additional labor charges. Our solution eliminates that entire headache.

This Powertrain Control Module, service part number 19210070, is the correct, reliable replacement for your vehicle. The most significant benefit we offer is our in-house programming service. Before we ship the part, we flash it with the newest updates from GM, tailored specifically to your VIN. It arrives at your door ready for installation.

Common Symptoms of a Failing 2006 Equinox PCM:

  • โœ” Check Engine Light (CEL) illuminated with communication or processor-related fault codes.
  • โœ” Harsh or erratic automatic transmission shifting.
  • โœ” Engine stalling, stumbling, or running rough.
  • โœ” Complete no-start condition where the engine cranks but won’t fire.
  • โœ” Reduced engine power or poor fuel economy.
  • โœ” Issues with other modules, as the PCM is a central communication hub.

Why Choose This Programmed Module?

Getting your vehicle back to factory-spec operation is the goal. This module ensures that happens without the typical hurdles.

  • โœ” VIN-Specific Programming: We load the latest GM software for your exact vehicle. This ensures optimal performance, fuel efficiency, and emissions control.
  • โœ” Skip the Dealership: No need to pay for expensive programming services or have your vehicle towed. This is a plug-and-play solution (after a simple security relearn).
  • โœ” Direct-Fit Replacement: This part is designed to replace the original module perfectly, ensuring all connectors and mounting points line up. It is a direct replacement for service numbers 19210070 and 12600928.
  • โœ” Restored Drivability: A functioning PCM is key to a smooth-running engine and transmission. This replacement will resolve issues caused by a faulty original unit.

Installation Note: The Security Relearn Procedure

After installing the new module, you will need to perform a simple security relearn procedure (often called a Passlock or anti-theft relearn). This syncs the new PCM with your vehicle’s anti-theft system. It’s a straightforward process that typically involves turning the key to the ‘ON’ position for 10-15 minutes, then off, and repeating two more times. This procedure can be done in your driveway and does not require a special scan tool.

Guaranteed Fitment

This module is engineered to be a direct replacement for the original electronic control module on the following vehicles. Please verify your vehicle and engine options below.

  • โœ” 2006 Chevrolet Equinox (Located in LH engine compartment)
  • โœ” 2006 Pontiac Torrent (Located in LH engine compartment)
  • โœ” 2006 Pontiac G6 (with ID 12600928)
  • โœ” 2006 Chevrolet Malibu (with 3.5L engine)
  • โœ” 2006-2007 Buick Rendezvous (with 3.5L engine)
  • โœ” 2006 Chevrolet Uplander (with 3.5L engine)
  • โœ” 2006 Buick Terraza (with 3.5L engine)
  • โœ” 2006 Pontiac Montana SV6 (with 3.5L engine)

IMPORTANT: After your purchase, please send us your vehicle’s 17-digit VIN. We cannot ship your order until we have this information to complete the essential programming service.

Condition

Refurbished

MPN

19210070

Genuine OEM

Yes

PartNumber

590

Model

EQUINOX

Year

2006

Brand

GM

Manufacturer Part Number

,

Interchange part number

Scroll to Top