Is Your 2006 Caravan or Town & Country Experiencing Engine Problems?
If your 2006 Dodge Caravan or Chrysler Town & Country is stalling, running rough, misfiring, or simply won’t start, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the central computer of your vehicle’s engine management system, responsible for controlling everything from fuel injection and spark timing to transmission shifting and emissions. When it begins to fail, it can cause a wide array of frustrating and often intermittent issues that can be difficult to diagnose. Don’t let a faulty computer keep your reliable minivan off the road. This direct-fit replacement engine computer is the solution you need.
From the Diagnostic Bay
We had a 2006 Town & Country come into the shop with a persistent, random misfire on cylinder 3. The owner had already replaced the spark plug, wire, and ignition coil pack, but the problem remained. Diagnostic scans showed a code for the cylinder 3 injector circuit. After testing the injector and wiring, which both checked out fine, we focused on the ECM. By using a scope, we discovered the driver circuit within the original ECM responsible for firing that injector was failing intermittently. A replacement ECM, programmed to the vehicle’s VIN, solved the problem instantly. It’s a classic case where the component itself is fine, but the computer controlling it has failed.
Common Symptoms of a Failing ECM
A failing engine computer can manifest in numerous ways. If you’re noticing any of the following issues, it’s a strong indicator that your ECM needs replacement:
- ✔ Check Engine Light is on with various trouble codes (DTCs) stored.
- ✔ Engine stalls unexpectedly or for no apparent reason.
- ✔ Difficulty starting the engine, or a complete no-start condition.
- ✔ Rough idling, stuttering, or hesitation during acceleration.
- ✔ Noticeable decrease in fuel economy.
- ✔ Transmission shifting issues or harsh engagement.
- ✔ Intermittent loss of power.
- ✔ Communication errors with diagnostic scan tools.
The Plug-and-Play Solution: Your 2006 Caravan Engine Computer
The biggest hurdle in replacing a modern vehicle’s computer is the programming. Typically, this requires a trip to the dealership and expensive proprietary tools. Our process eliminates that completely. This 2006 Caravan Engine Computer arrives at your door fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and mileage. This ensures that all factory settings, including the immobilizer (anti-theft) system, are correctly configured. The result is a true plug-and-play installation. Simply disconnect the battery, swap the modules, reconnect the battery, and start your engine. No additional programming or dealer visits are required.
Installation and Compatibility
This Electronic Control Module is located on the driver’s side (LH) fender in the engine bay. The replacement process is straightforward for anyone with basic mechanical skills. This unit is a guaranteed fit for the following vehicles:
- 2006 Chrysler Town & Country with 3.3L or 3.8L engine options.
- 2006 Dodge Caravan with 3.3L or 3.8L engine options.
This module is a direct replacement for a wide range of original part numbers, ensuring broad compatibility. Please verify that your original part number is on the list below:
05094650AC, 05094650AD, 05187758AA, 05187758AB, 05187758AC, 05094658AA, 05094658AB, 05094658AC, 05094658AD, 05094658AE, 05094658AF, 05094675AA, 05094675AB, 05094675AC, 05094675AD, 05094675AE, 05094659AB, 05094659AC, 05094659AD, 05094659AE, 05187756AA, 05187756AB, 0518775.
By choosing this pre-programmed ECM, you are getting a reliable, cost-effective solution that restores your vehicle’s performance and dependability. Get your minivan back on the road quickly and confidently.
Frequently Asked Questions
Is this engine computer truly plug-and-play?
Yes. We program the module with your vehicle’s specific VIN and mileage before shipping. This process syncs the computer to your vehicle’s anti-theft system and other modules, so no additional programming or dealer visit is necessary upon installation.
What information do you need from me to program it?
During the checkout process, we will require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This is crucial for a successful programming service.
Where is this module located on my 2006 Caravan?
The Electronic Control Module is located in the engine bay, mounted to the driver’s side (LH) fender. It will have three large electrical connectors attached to it.
Will this fix my check engine light?
If the check engine light is caused by an internal fault within the original ECM, then this replacement part will resolve the issue. After installation, any stored trouble codes should be cleared with a standard OBD-II scanner to turn off the light.
Do I need to return my old computer (core)?
Please check the specific terms of the sale on the product page. Some listings may require a core return to receive a credit, while others do not. This information will be clearly stated.