Is Your 2006 Dodge Caravan or Chrysler Town & Country Running Rough?
The Engine Control Module (ECM), also known as the Engine Control Unit (ECU), is the electronic brain of your 2006 Dodge Caravan or Chrysler Town & Country. It’s responsible for managing critical engine functions, including fuel injection, ignition timing, and emissions systems. When this vital component begins to fail, it can cause a wide range of frustrating and potentially damaging issues, from poor fuel economy to a complete no-start condition. If you’re tired of guessing games and want a reliable solution, you’ve come to the right place.
From the Diagnostic Bay
We had a 2006 Town & Country come into the shop that had its owner completely stumped. The van would randomly stall at traffic lights and sometimes refuse to restart for 10-15 minutes. The check engine light was on, but the codes were intermittent and pointed to multiple different sensors. After verifying the wiring harness and testing the sensors, which all checked out, we focused on the ECM. A failing module can send false signals, causing the computer to throw misleading codes. We installed one of our pre-programmed ECMs, and the van ran perfectly. The random stalling vanished, and the owner was thrilled to have their reliable family vehicle back on the road without an expensive trip to the dealership.
Common Symptoms of a Failing ECM
- ✔ Persistent Check Engine Light (CEL) that won’t clear or returns immediately.
- ✔ Engine stalling, stumbling, or hesitating, especially under load.
- ✔ Rough or erratic idling.
- ✔ A noticeable drop in fuel efficiency.
- ✔ Difficulty starting the engine or a complete no-start situation.
- ✔ Misfire codes (e.g., P0300, P0301) even after replacing plugs and coils.
- ✔ Communication errors with diagnostic scan tools.
- ✔ Automatic transmission shifting problems.
The Right Solution: A Plug-and-Play 2006 Caravan Engine Computer
Replacing the ECM on your minivan doesn’t have to involve a complicated and costly trip to the dealer for programming. This replacement 2006 Caravan Engine Computer is delivered to you fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This means the installation process is straightforward and requires no additional programming. It’s a true plug-and-play solution designed to get you back on the road quickly and affordably.
Installation and Compatibility
This module is a direct-fit replacement for the original unit located on the driver’s side (LH) fender area. It is compatible with both the 3.3L and 3.8L V6 engines found in the 2006 Dodge Caravan and 2006 Chrysler Town & Country. To ensure a perfect match, please verify your original part number against the extensive list of compatible numbers below.
Compatible Part Numbers:
This module replaces a wide range of original equipment part numbers, including: 05094650AC, 05094650AD, 05187758AA, 05187758AB, 05187758AC, 05094658AA, 05094658AB, 05094658AC, 05094658AD, 05094658AE, 05094658AF, 05094675AA, 05094675AB, 05094675AC, 05094675AD, 05094675AE, 05094659AB, 05094659AC, 05094659AD, 05094659AE, 05187756AA, 05187756AB, 0518775.
Frequently Asked Questions
Do I need to have this computer programmed by a dealer?
No. This engine computer arrives at your door fully programmed to your vehicle’s VIN and mileage. It is a plug-and-play unit, meaning you can install it yourself without any special tools or a trip to the dealership for programming.
Where is the ECM located on my 2006 Caravan or Town & Country?
The Electronic Control Module (ECM) is located in the engine bay, mounted on the driver’s side (LH) fender well. You will need to remove the air filter housing to gain access to it.
Will this fix my check engine light?
If the check engine light is caused by a faulty ECM, then yes, this part will resolve the issue. However, it is always recommended to have the codes read by a diagnostic scanner to ensure the problem isn’t with a sensor or another component before ordering.
Is this compatible with both the 3.3L and 3.8L engines?
Yes, this ECM is compatible with 2006 Dodge Caravan and Chrysler Town & Country models equipped with either the 3.3L or 3.8L V6 engine. We program it specifically for your vehicle’s configuration based on the VIN you provide.
What information do you need from me when I order?
To ensure proper programming, we will require your vehicle’s 17-digit VIN (Vehicle Identification Number) and the current mileage. This allows us to configure the module to match your vehicle’s exact specifications.