2006 Cadillac CTS Engine Control Module ECM 12590032 Programmed

Restore Your Vehicle’s Performance Instantly!

Get your GM vehicle running smoothly again with this VIN-programmed Engine Control Module. It arrives flashed with the latest software for your specific car, eliminating the need for a costly trip to the dealer. A direct-fit solution for a wide range of models. Order now and get back on the road fast!

$141.74

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08112-29 Categories: ,
Guaranteed Safe Checkout

Is Your Vehicle Running Rough? Restore Its Brainpower.

The Engine Control Module (ECM), often called the engine computer, is the central command center for your vehicle’s engine. It controls everything from fuel mixture and ignition timing to idle speed and emissions. When it starts to fail, it can cause a cascade of confusing and frustrating problems, leaving you stranded or dealing with poor performance. This direct-fit Engine Control Module, service number 12590032, is the definitive solution for a wide range of GM vehicles, including the 2006 Cadillac CTS, restoring factory performance and reliability.

From the Diagnostic Bay
We had a 2008 Chevy Impala come in with a complaint of intermittent stalling and a check engine light that would come and go. The owner had already replaced the spark plugs and a coil pack with no success. Our scan tool showed a series of seemingly unrelated communication error codes. Instead of chasing ghosts, we checked the power and ground signals at the ECM connector. We found a weak ground, but even after repairing it, the issues persisted. It turned out the intermittent voltage had damaged the internal processors of the original ECM. We installed one of these VIN-programmed modules, performed a quick security relearn, and the car ran perfectly. It’s a great reminder that a faulty module can mimic many other component failures.

The Simple, Reliable Solution: VIN Programming Included

Don’t waste time and money on a trip to the dealership for expensive programming. We take the hassle out of the repair. When you purchase this module, simply provide us with your vehicle’s 17-digit Vehicle Identification Number (VIN). Our technicians will program the unit with the latest GM-certified software specific to your car. This ensures that all systems communicate correctly and that your engine operates exactly as the manufacturer intended. It arrives at your door ready for installation, making the process as straightforward as possible.

Common Symptoms of a Failing ECM

  • ✔ Check Engine Light is on or flashing
  • ✔ Engine stalling or shutting off while driving
  • ✔ Difficulty starting the vehicle or a no-start condition
  • ✔ Noticeable decrease in fuel economy
  • ✔ Rough or erratic idling
  • ✔ Poor acceleration and loss of power
  • ✔ Transmission shifting issues or harsh shifts
  • ✔ Communication errors with diagnostic scan tools

Why Choose Our 2006 CTS Engine Module?

This isn’t just a replacement part; it’s a comprehensive solution. Built to meet or exceed original equipment specifications, this module ensures long-lasting durability. By programming it to your VIN, we guarantee it integrates seamlessly with your vehicle’s existing electronic systems, including the anti-theft system (a security relearn procedure may be required after installation). This unit is a direct replacement for a wide range of service numbers, including 12590032, 12602044, 12603530, 12605843, 12607096, 12630457, and 19210737, offering broad compatibility across many GM cars, trucks, and SUVs. Getting your vehicle back to peak operating condition has never been easier.

By choosing our pre-programmed 2006 CTS Engine Module, you are bypassing the most complicated step of the repair process. The software is already loaded and matched to your vehicle. All that’s left is the physical installation and, in some cases, a simple key relearn procedure that can often be done without special tools. Take control of your repair and get back on the road with confidence.

Frequently Asked Questions

Do I need to get this module programmed?

No. We handle the programming for you before we ship the part. Simply provide your vehicle’s VIN during or after checkout, and we will flash the module with the latest GM software for your specific vehicle.

Is this a plug-and-play installation?

Mostly, yes. Because it’s programmed to your VIN, it will communicate with your engine correctly. However, you may need to perform a security relearn procedure (also known as a CASE relearn or anti-theft relearn) to sync the module with your vehicle’s keys. This procedure is often simple and can be found in your owner’s manual or online.

How do I find my VIN?

Your 17-digit Vehicle Identification Number (VIN) can be found on your vehicle’s registration, insurance card, or on a small plate on the driver’s side of the dashboard, visible through the windshield.

Will this fix my car’s check engine light?

If the check engine light and other symptoms are being caused by a faulty ECM, then yes, this part will resolve the issue. It is always recommended to have a proper diagnosis performed by a qualified mechanic to confirm the ECM is the point of failure before ordering.

Which part numbers is this module compatible with?

This module is a direct replacement for several service numbers, including 12590032, 12602044, 12603530, 12605843, 12607096, 12630457, and 19210737.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

12590032

Interchange part number

PartNumber

590

Model

CTS

Year

2009

Brand

GM

Manufacturer Part Number

, , , , ,

Hardware Type

Scroll to Top