2006 – 2011 Buick Lucerne Body Control Module (BCM) 95151084 – Programmed to Your VIN
Imagine cruising down the highway in your 2006-2011 Buick Lucerne, only to have the interior lights flicker erratically or the power windows refuse to budge—classic signs of a failing Body Control Module. If you’re troubleshooting issues like erratic electrical behavior or no-start conditions, this pre-programmed BCM (part number 95151084) is your direct solution. It’s flashed with the latest GM updates tailored to your VIN, ensuring seamless integration without the hassle of dealer visits. This module replaces a range of OEM numbers including 10382479, 15093910, and others, fitting not just your Lucerne but also models like the 2006-2012 Impala or 2007-2012 Acadia. Beyond basic replacement, it restores reliable vehicle functions, preventing those frustrating breakdowns during daily commutes or long drives. Drawing from over two decades in diagnostics, I’ve seen how a fresh BCM can eliminate persistent glitches, saving you time and repair costs while boosting overall drivability.
Key Features & Benefits
- Delivers precise VIN-specific programming for exact match to your 2006-2011 Buick Lucerne, ensuring all systems communicate flawlessly.
- Incorporates the newest GM software flashes to address known vulnerabilities, enhancing electrical stability and preventing future faults.
- Supports multiple compatible part numbers, making it a versatile fix for various GM vehicles beyond just the Lucerne.
- Restores critical functions like lighting control and security systems, ideal for owners facing intermittent power issues.
- Simplifies repairs by arriving ready-to-install, cutting down on diagnostic guesswork and potential downtime.
- Offers long-term reliability, backed by expert insights from real-world scenarios where similar modules have resolved chronic electrical woes.
Common Issues & How This Fixes Them
Owners of the 2006-2011 Buick Lucerne often encounter BCM-related problems that disrupt everyday driving. For instance, a common symptom is dashboard lights dimming unexpectedly or door locks malfunctioning, often triggered by moisture ingress or wiring corrosion—especially in humid climates. This can lead to DTCs like B1370 (Device Ignition OFF, ON, RUN, and CRANK Circuit) or U0140 (Lost Communication with BCM), causing safety concerns during night drives. Another frequent issue is a no-start scenario where the security system fails to recognize the key, stemming from internal module degradation over time. In one case I handled, a Lucerne owner dealt with erratic wiper operation during rainstorms, traced back to BCM signal interruptions. Replacing with this programmed unit clears these codes by recalibrating the network, restoring proper signal flow. Expert tip: Before swapping, check battery voltage—low power can mimic BCM failures. This fix not only resolves the root cause but also prevents cascading problems like battery drain. For voice search queries like “how to fix BCM issues on 2006 Lucerne,” this module provides a straightforward path, often eliminating the need for extensive wiring repairs. By addressing these with updated firmware, it ensures smoother performance, much like how I’ve guided countless drivers back on the road without recurring headaches.
Easy Installation Guide
- Provide your VIN after purchase so we can program the BCM with the latest GM updates tailored to your vehicle.
- Disconnect the negative battery cable to ensure safety and reset any stored codes.
- Locate the BCM on the right side of the dash in your 2006-2011 Buick Lucerne—remove any panels for access.
- Unplug the old module, connect the new one, and secure it in place, double-checking all connectors for a snug fit.
- Reconnect the battery and perform a system check; if a no-start occurs due to theft deterrent, initiate the relearn by inserting the key, turning to ON for 10 minutes (three cycles if needed), then starting the engine.
- Test all functions like lights and locks; clear any remaining DTCs with a scan tool for optimal results.
Fitment Details
Compatible with:
2006 – 2011 Buick Lucerne
Verify part numbers; provide VIN for confirmation. Also fits select models like Equinox 07-09, Impala 06-13, and others listed in our compatibility chart.
Don’t let BCM troubles sideline your 2006-2011 Buick Lucerne any longer—grab this programmed module today to reclaim reliable performance and peace of mind. With its VIN-matched setup, you’ll fix those nagging electrical issues efficiently. Order now and get back to smooth drives; remember, early replacement often avoids bigger repairs down the line.