2006-2007 Monte Carlo BCM 15921353 Body Control Module Cloning Service

End Your Car’s Electrical Headaches

Fix the frustrating electronic issues in your vehicle with our expert BCM cloning service. Designed for the 2006-2007 Monte Carlo, this service transfers your car’s unique data to a replacement module, ensuring a perfect, plug-and-play fit. Avoid expensive dealer programming and restore your power windows, locks, and security system functionality. Solve your car’s problems and order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-647 Categories: ,
Guaranteed Safe Checkout

Restore Your Monte Carlo’s Electrical System

Are you dealing with baffling electrical problems in your 2006-2007 Chevrolet Monte Carlo? Intermittent power windows, a security light that won’t turn off, or a radio with a mind of its own are classic signs of a failing Body Control Module (BCM). As the nerve center for your car’s body electronics, when the BCM falters, it can cause widespread and frustrating issues. This is not just an inconvenience; it can affect vehicle security and functionality. We offer a reliable, straightforward solution that gets you back on the road without the high costs and hassle of a dealership visit.

This service provides a replacement BCM with your vehicle’s original data perfectly cloned onto it. You simply send us your original module, and we perform a direct data transfer to a fully tested replacement unit. This process ensures that all your car’s specific settings, security information, and key data are preserved. The result is a true plug-and-play module, eliminating the need for expensive and complex programming with a scan tool after installation. This is the most effective way to replace a faulty 2006-2007 Monte Carlo BCM.

A Technician’s Notebook: The Ghost in the Machine

I remember a 2007 Monte Carlo SS that came into the shop with a list of complaints that seemed unrelated. The driver’s window would only work sometimes, the radio would randomly shut off, and the anti-theft light would flash, occasionally preventing the car from starting. The owner had already replaced the window switch and checked fuses. After confirming power and ground to the BCM were solid, we knew where the problem was. Instead of a costly new module and programming from the dealer, we performed a cloning service. Once the cloned module was installed, every single issue vanished. It’s a reminder that a single component, the BCM, can be the source of countless electrical gremlins.

Common Signs of a Failing BCM

If your vehicle is experiencing these symptoms, a failing BCM is the likely cause. Look out for communication error codes, such as U0140, which point directly to a BCM communication failure.

  • ✔ Erratic or non-functional power windows, door locks, and interior lights.
  • ✔ The security or anti-theft system light stays on or flashes, potentially causing a no-start condition.
  • ✔ Dashboard warning lights (like ABS or Airbag) illuminate for no reason.
  • ✔ Radio or climate control systems behaving unpredictably.
  • ✔ Horn honking unexpectedly or not working at all.
  • ✔ Communication issues with diagnostic scan tools.

A Straightforward Guide to Your BCM Swap

Our cloning service makes this repair accessible for both DIY enthusiasts and professional mechanics. The process is designed to be simple and effective.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. Locate and Remove: On the 2006-2007 Monte Carlo, the BCM is typically located on the left-hand side of the steering column. Carefully disconnect the wiring harnesses and unbolt the module from its bracket.
  3. Send Us Your Module: Securely package your original BCM and send it to us. We handle the rest, transferring all necessary data to the replacement unit. We will return your original module with the replacement.
  4. Install the Replacement: Once you receive the cloned BCM and your original, simply install the replacement module in the reverse order of removal. Reconnect the wiring harnesses securely.
  5. Final Steps: Reconnect the battery terminal. In most cases, your vehicle will start and function normally. However, be aware of potential post-installation procedures noted below.

Post-Installation Relearn Procedures

While our cloning service makes this a plug-and-play repair, some GM vehicles may require a simple relearn procedure to ensure all systems communicate correctly.

  • Airbag System Sync: If your airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a compatible high-level scan tool. This syncs the security systems and is only necessary if the light is on.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure correct brake light operation and to prevent issues with the traction control system.

Disclaimer: Vehicle systems vary. Always refer to a factory service manual or a qualified technician for procedures specific to your vehicle.

Verified Vehicle Compatibility

This BCM is a direct replacement for a wide range of GM vehicles. Please verify your part number is on this list to ensure compatibility. This service is a reliable solution for your 2006-2007 Monte Carlo BCM and many other models.

Replaces Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Fits Models Including:

ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, YUKON XL 1500 10. (Please check the original description for specific options and IDs).

What is a BCM cloning service?

What is a BCM cloning service?

Cloning is a process where we perform a direct data transfer from your original, failing Body Control Module to a replacement unit. This copies all the vehicle-specific information, including security data and optional feature settings, making the replacement module plug-and-play.

Why is cloning better than just programming a new module?

Cloning preserves the exact configuration of your vehicle. Standard programming often requires additional, complex procedures at a dealership to sync keys and other modules. Our cloning service for the 2006-2007 Monte Carlo BCM avoids these extra steps and costs.

Do I have to send you my original BCM?

Yes. For the cloning service to work, we need your original module to extract the unique data for your vehicle. We will return your original module to you along with the newly cloned replacement.

Will my existing keys work after installation?

Absolutely. Because we clone the security data from your original BCM, the replacement module will recognize your existing keys without any need for reprogramming.

What if my airbag light is on after installing the cloned BCM?

This can happen occasionally. It means the new BCM needs to be electronically ‘introduced’ to the airbag system’s computer (SDM). This requires a ‘Setup SDM Primary Key in BCM’ procedure with a professional-grade scan tool to turn off the light.

Genuine OEM
Condition
MPN

15921353

Interchange part number
PartNumber
Model

Monte Carlo

Year
Brand
Manufacturer Part Number
Scroll to Top