2005-2008 LaCrosse ECM 12592124 Programmed to VIN | Engine Computer

Restore Your LaCrosse’s Performance!

Fix check engine lights, stalling, and poor performance with our pre-programmed ECM for the 2005-2008 Buick LaCrosse. We flash it to your VIN so it’s ready to install out of the boxโ€”no dealer visit needed! Fix your issue today!

$324.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-07145-10 Categories: ,
Guaranteed Safe Checkout

Is Your Buick LaCrosse Running Rough?

If you’re dealing with a frustrating check engine light, unpredictable stalling, poor acceleration, or a no-start condition, a failing Engine Control Module (ECM) is often the culprit. As a technician with over two decades of experience under the hood, I’ve seen how a faulty ECM can turn a reliable car into a constant headache. It’s the brain of your engine, and when it starts to fail, it can send incorrect signals to everything from your fuel injectors to your transmission, causing a host of confusing and costly problems.

A Technician’s Real-World Diagnostic Story

“A customer’s 2007 LaCrosse with the 3.6L came into my bay last month. It had intermittent stalling and a persistent P0606 code (ECM Processor Fault) that wouldn’t clear, even after a reset. The owner had already replaced spark plugs and a coil pack trying to solve it. After verifying power and grounds to the module were solid, we knew the internal processor in the original ECM was failing. Swapping in a pre-programmed unit like this one, flashed to his VIN, resolved all the issues. He was back on the road in under an hour, without a tow to the dealership for expensive programming.”

The Direct Solution: A VIN-Programmed 2005-2008 LaCrosse ECM

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We are offering a genuine, used GM Engine Control Module, part number 12592124, that has been meticulously tested and is ready for service. The most critical part of the process is that we flash it with the latest official GM software updates specifically for your vehicle’s Vehicle Identification Number (VIN). This ensures seamless communication with your car’s other systems, like the Body Control Module and Transmission Control Module, right out of the box.

  • โœ” VIN-Programmed for Your Vehicle: We handle the programming before we ship. Just provide your VIN at checkout, and your ECM arrives ready to install.
  • โœ” No Expensive Dealer Visit: Skip the hassle and high cost of dealership programming and key relearning procedures.
  • โœ” Solves Common Failure Points: Effectively addresses issues like false trouble codes, rough idling, poor fuel economy, and communication errors.
  • โœ” Guaranteed Compatibility: This module is a direct replacement for service numbers 12581144, 12588472, 12592124, and 19260507.
  • โœ” Cost-Effective Repair: Get a reliable, tested OEM part for a fraction of the cost of a new module.

Plug-and-Play Installation: Get Back on the Road Fast

Installing your new ECM is a straightforward process that you can do in your own driveway. For the 2005-2008 Buick LaCrosse, the ECM is conveniently located in the lower air cleaner housing, making it easily accessible.

  1. Safety First: Disconnect the negative terminal from your car’s battery and wait 10-15 minutes for all system capacitors to discharge.
  2. Locate the ECM: Open the hood and find the air cleaner assembly. The ECM is typically mounted directly to or below it.
  3. Disconnect Connectors: Carefully release the locking tabs on the electrical wiring harnesses and pull them straight out from the old ECM. Inspect the connectors for any signs of corrosion or bent pins.
  4. Remove Old Module: Unbolt the old ECM from its mounting bracket.
  5. Install New Module: Mount your new, pre-programmed ECM in place and securely tighten the bolts.
  6. Reconnect Everything: Firmly plug the wiring harnesses back into the new module until they click into place. Reconnect your negative battery terminal.
  7. Vehicle Relearn: In most cases, a security relearn procedure will be necessary. This can typically be done by turning the key to the ‘ON’ position for 10-15 minutes, then off, and repeating two more times before starting the engine. This allows the vehicle’s anti-theft system to recognize the new module.

Broad GM Compatibility

While this is the perfect solution for your LaCrosse, this versatile ECM also fits a range of other GM vehicles equipped with the 3.6L engine. Please verify your part number and vehicle options to ensure a perfect match.

  • Buick Allure: 2005-2008 (3.6L)
  • Buick Rendezvous: 2004-2006 (3.6L)
  • Cadillac CTS: 2004-2007 (Base models)
  • Cadillac SRX: 2004-2006 (3.6L)

Don’t let a bad computer keep your car parked. Order this VIN-programmed ECM today and restore the performance and reliability you depend on.

Condition

Refurbished

Genuine OEM

Yes

MPN

12588472

Interchange part number

PartNumber

590

Model

LACROSSE

Year

2004

Brand

GM

Manufacturer Part Number

, , ,

Hardware Type

Scroll to Top