Is Your Chevrolet SSR’s Transmission Acting Up?
There’s nothing more frustrating than when the smooth power of your unique 2005-2006 Chevy SSR is interrupted by transmission problems. One moment you’re enjoying the drive, the next you’re dealing with jarring shifts, a lit-up check engine light, or the truck refusing to shift out of gear. In my 20+ years as a diagnostician, I’ve seen these exact issues countless times. More often than not, the culprit isn’t a catastrophic internal failure, but a faulty Transmission Control Module (TCM).
“A customer’s 2005 SSR came in last week with what he thought was a dying transmission. It was stuck in 3rd gear, and he’d already gotten a quote for a full transmission rebuild costing thousands. After a quick scan, I saw a classic TCM communication error. Instead of a rebuild, we swapped in a VIN-programmed module like this one. In under an hour, the truck was shifting perfectly. He saved a fortune by correctly diagnosing the electronic ‘brain’ instead of the mechanical ‘body’ of the transmission.”
Common Symptoms of a Failing TCM in Your SSR
A failing TCM can manifest in several ways. If you’re experiencing any of the following, it’s a strong indicator that your module needs replacement:
- โ Harsh, delayed, or unpredictable gear shifts.
- โ Vehicle is stuck in “limp mode” (usually 2nd or 3rd gear).
- โ Check Engine Light or Transmission Warning Light is on.
- โ Diagnostic Trouble Codes (DTCs) like P0700, P0750, or other solenoid-related faults are present.
- โ Complete loss of shifting capability or intermittent communication failure.
The Direct Solution: A VIN-Programmed 2005-2006 SSR Transmission Control Module
This T42 TCM, part number 24234503, is the definitive fix for these issues. We take the guesswork and hassle out of the repair. By pre-programming the module to your truck’s specific Vehicle Identification Number (VIN), we ensure it works perfectly right out of the box. You get a reliable, OEM-quality part without the time and expense of a dealership visit for programming.
Key Features & Benefits:
- โ Plug-and-Play Power: Arrives pre-loaded with your SSR’s VIN and the latest GM software updates for immediate, seamless installation.
- โ Restored Performance: Eliminates erratic shifting and communication codes, restoring the smooth, reliable operation you expect.
- โ Built to Last: Constructed to meet or exceed original equipment standards and backed by our one-year warranty for your peace of mind.
- โ Broad Compatibility: Interchangeable with part numbers 24252114, 24230461, 24234274, and more, ensuring a perfect match.
Plug-and-Play Installation: No Dealer Visit Required
Installing your new TCM is a straightforward job you can do in your own garage. For the 2005-2006 SSR, the module is typically easy to access.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the Module: On the SSR, the TCM is located on the front left-hand (driver’s side) frame rail.
- Swap the Part: Carefully unplug the electrical connectors from the old module. Unbolt it from the frame, then mount the new module in its place.
- Reconnect: Securely plug the electrical connectors into your new TCM. Reconnect the battery terminal.
- Final Steps: Start the vehicle. While our programming handles the critical setup, it’s always good practice to use a basic scan tool to clear any stored fault codes from the vehicle’s memory.
Don’t let a faulty module sideline your Chevy SSR. Order this VIN-programmed TCM today and get back on the road with confidence.