2004-2007 Savana 1500 Van Body Control Module 15136877 | VIN Programmed

Fix Your Van’s Electrical Gremlins Fast

Tired of unpredictable lights, locks, or a dead HVAC system in your Savana or Express van? This OEM-quality Body Control Module is the solution. It arrives pre-programmed to your VIN for a simple, no-hassle installation that takes minutes. Restore your van’s reliability and get it back to work. Order today for a permanent fix!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01130-153 Categories: ,
Guaranteed Safe Checkout

Are you chasing down frustrating electrical gremlins in your GMC Savana or Chevrolet Express van? If you’re dealing with flickering lights, a dead HVAC blower, or power locks with a mind of their own, a failing Body Control Module (BCM) is the likely culprit. As the central command center for your vehicle’s body electronics, a faulty BCM can make a reliable workhorse feel unpredictable. This replacement Body Control Module, part number 15136877, is the definitive solution, arriving pre-programmed to your van’s specific VIN for a true plug-and-play repair.

Forget about expensive dealership visits and the hassle of programming. We handle the complex software flashing for you. Simply provide your VIN at checkout, and we’ll ensure this module communicates flawlessly with your vehicle’s existing systems right out of the box. This is the most efficient way to restore full functionality and get your van back on the road, earning its keep.

From the Diagnostic Bay: The Contractor’s Phantom Faults

“A local plumber brought in his ’06 Savana 2500, completely fed up. The radio would randomly shut off, the dome light would stay on, and sometimes the power door locks wouldn’t respond. He’d already replaced the battery and checked fuses. After connecting my scanner, I saw a handful of ‘loss of communication’ codes pointing to the BCM. These modules, especially in work vans that see constant use and vibration, can develop internal circuit board failures over time. We installed one of our VIN-programmed modules, and in less than 10 minutes, every single issue was resolved. It’s a common failure point I’ve seen hundreds of times, and a pre-programmed unit is the fastest, most reliable fix.”

Is Your Savana Van Showing These Electrical Faults?

A failing BCM can cause a wide range of confusing symptoms. If you’re noticing any of the following, it’s time to inspect your module:

  • ✔ The HVAC blower motor works intermittently or not at all.
  • ✔ Power windows, door locks, or mirrors operate erratically or have failed completely.
  • ✔ The security system triggers without reason, or the vehicle won’t start (PassLock issues).
  • ✔ Headlights, taillights, or interior lights flicker, stay on, or won’t turn on.
  • ✔ Your scanner shows communication DTCs or codes like B1001 (Option Configuration Error).
  • ✔ The airbag warning light is illuminated on the dash.

A Straightforward Guide to BCM Installation

For the 2004-2007 Savana 1500 Van Body Control Module, installation is simple enough for a DIYer. In most cases, it takes just a few minutes.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery to prevent electrical shorts and help reset the system.
  2. Locate the BCM: In Savana and Express vans, the BCM is typically found in the center of the dashboard, often behind a removable panel or near the fuse box area.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old module. They have release tabs that need to be pressed. Once disconnected, unbolt or unclip the old BCM and remove it.
  4. Install the New Module: Seat the new, pre-programmed BCM in the same location. Secure it in place and firmly reconnect all electrical connectors until they click.
  5. Final Steps: Reconnect the battery terminal. Start the vehicle and test all functions—lights, locks, windows, wipers, and HVAC—to confirm the repair was successful.

Verified Vehicle Compatibility List

This module is a direct replacement for part number 15136877 and other interchangeable numbers. It is guaranteed to fit the following vehicles, provided the options match:

SAVANA 1500 VAN 04-07 Body Control (BCM); (center dash), w/commercial tradesman package (opt PRP)
EXPRESS 1500 VAN 04-07 Body Control (BCM); (center dash), w/commercial tradesman package (opt PRP)
SAVANA 2500 VAN 04-07 Body Control (BCM); (center dash), w/commercial tradesman package (opt PRP)
EXPRESS 2500 VAN 04-07 Body Control (BCM); (center dash), w/commercial tradesman package (opt PRP)
SAVANA 3500 VAN 04-07 Body Control (BCM); (center dash), w/commercial tradesman package (opt PRP)
EXPRESS 3500 VAN 04-07 Body Control (BCM); (center dash), w/commercial tradesman package (opt PRP)
Also fits a wide range of Chevrolet, GMC, Cadillac, and Hummer trucks/SUVs from 2002-2007. Please verify your part number.

Frequently Asked Questions

What does ‘VIN Programmed’ actually mean for me?
It means we load your vehicle’s unique 17-digit Vehicle Identification Number (VIN) and all its specific options into the module before shipping. This makes the BCM a plug-and-play part, saving you a trip to the dealership for expensive programming.
Do I need to return my old BCM? Is there a core charge?
No. We do not require you to send back your old part. There is absolutely no core charge, making the process simpler and faster for you.
My airbag light is on. Will this new BCM fix it?
If the airbag light is caused by a faulty BCM, this part will resolve the root cause. However, after installation, the airbag system (SDM) may need to be synced with the new BCM using a professional scan tool. This is a standard ‘Setup SDM Primary Key’ procedure.
Where is the BCM located on my 2005 Savana Van?
On the 2004-2007 Savana and Express vans, the Body Control Module is located in the center dash area. You may need to remove a trim panel to access it easily.
What if I still have issues after installation?
Our modules are backed by a one-year warranty and expert support. While our programming resolves most issues, some vehicles may require a ‘Brake Pedal Position Relearn’ or an ‘SDM Sync’ with a capable scan tool. Always consult a factory service manual or a qualified technician if you encounter persistent problems.
Conditions & Options

Programmed to your VIN GM: 15116066

Year
Genuine OEM

Yes

MPN

Interchange part number

Condition

Refurbished

PartNumber

Model

Make

Brand

Manufacturer Part Number

, , , , , , , , , ,

Scroll to Top