2003 Silverado 3500 PCM 12576869 Programmed to Your VIN

Restore Your Truck’s Performance

Fix check engine lights, no-start conditions, and poor shifting with this Powertrain Control Module. It arrives pre-programmed to your vehicle’s VIN with the latest GM softwareโ€”no dealer visit needed. A direct-fit solution for your 2003 GM truck or van. Fix your issue today!

$98.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-06724-73 Categories: ,
Guaranteed Safe Checkout

Is Your GM Truck or Van Running Rough? Get Back on the Road Fast.

If you’re dealing with frustrating engine problems on your 2003 GM vehicle, a failing Powertrain Control Module (PCM) is often the culprit. As the central computer for your engine and transmission, its health is critical. A faulty PCM can leave your work truck stranded or make your daily driver unreliable. This module is the direct-fit, reliable solution to get your vehicle operating like new again.

From my 20+ years in the shop, I’ve seen firsthand how a bad engine computer can mimic a dozen other issues. Before you waste time and money chasing phantom sensor failures, consider if your vehicle is showing these classic signs of PCM failure:

  • โœ” Check Engine Light is on with communication error codes.
  • โœ” Engine cranks but refuses to start.
  • โœ” Harsh, erratic, or delayed transmission shifting.
  • โœ” Poor fuel economy and a noticeable loss of power.
  • โœ” Stalling, stumbling, or rough idling for no apparent reason.

The Simple Solution: A VIN-Programmed 2003 Silverado 3500 PCM

Forget expensive dealership visits and programming fees. We take the hassle out of the repair. When you order, simply provide us with your vehicle’s VIN. We will then program this module with the latest GM-certified software specific to your exact vehicle configuration. It arrives at your door ready for a straightforward installation, restoring the precise fuel delivery, spark timing, and transmission control your truck needs.

Expert Pro Tip: Check Your Connections First!

Before you condemn your old PCM, take 10 minutes to do this. On these early 2000s GM trucks and vans, the PCM is often located under the battery. Over time, battery acid can leak and corrode the large multi-pin connectors and wiring harness leading to the module. I’ve seen dozens of trucks come into the shop with classic PCM failure symptoms that were fixed simply by disconnecting the battery, removing the PCM connectors, and thoroughly cleaning both the pins on the module and the terminals in the harness with a contact cleaner and a small brush. A poor connection can cause all sorts of bizarre issues. It’s a free check that could save you a lot of trouble.

Plug-and-Play Installation: No Dealer Visit Required

You can install this module yourself with basic hand tools. Hereโ€™s a general guide for a truck like the Silverado or Sierra where the PCM is under the battery tray:

  1. Safety First: Disconnect the negative battery terminal and secure it away from the battery post.
  2. Access the Module: Remove the battery and the battery tray. The PCM is typically located in a black plastic bracket underneath.
  3. Disconnect the Old PCM: Carefully unclip and remove the large wiring harness connectors from the old module. There are usually levers or tabs that need to be released.
  4. Swap the Modules: Unbolt the old PCM from its bracket and install the new one in its place.
  5. Reconnect Everything: Firmly seat the wiring harness connectors onto your new, pre-programmed PCM until they click into place. Reinstall the battery tray and the battery, then reconnect the negative terminal.
  6. Final Step: Your vehicle may require a security relearn procedure, which can typically be done by cycling the key and is detailed in many online forums or service manuals. This syncs the new PCM with your vehicle’s anti-theft system.

Guaranteed Compatibility and Performance

This Powertrain Control Module is a direct replacement for a wide range of GM vehicles and is compatible with multiple service numbers, including 12576869, 12581565, 12570557, 89017733, and more. It is engineered to restore the original performance and reliability for models such as:

  • โœ” 2003 Chevrolet Silverado & GMC Sierra (1500, 2500, 3500 with 4.3L or 8.1L Gasoline engines)
  • โœ” 2003 Chevrolet Express & GMC Savana Vans (1500, 2500, 3500)
  • โœ” 2003 Chevrolet Suburban & GMC Yukon XL 2500 (with 8.1L engine)
  • โœ” 2003 Chevrolet Avalanche 2500
  • โœ” 2003 Chevrolet S10, GMC Sonoma, Chevrolet Blazer, GMC Jimmy (with 4.3L engine)
  • โœ” 2003 Chevrolet Astro & GMC Safari
  • โœ” 2004 Cadillac CTS & Chevrolet Corvette (matching ID 12581565)

Ordering this pre-programmed 2003 Silverado 3500 PCM is the most efficient way to solve complex electronic issues and get your dependable GM vehicle back in service.

Conditions & Options

Programmed to your VIN GM: 12576106

Genuine OEM

Yes

MPN

12576869

Interchange part number

Condition

Refurbished

Model

Silverado 3500 Pickup

Year

2003

Brand

GM

Manufacturer Part Number

, , , , , , , , ,

GTIN

Does not apply

Scroll to Top