2003 Savana 2500 PCM 12570557 Programmed to Your VIN | Engine Computer

Programmed 2003 Savana 2500 PCM

Fix frustrating running issues like a check engine light, poor performance, or a no-start condition. This PCM arrives programmed to your van’s VIN with the latest GM software. No dealer visit needed. Get your van back on the road fast. Order today!

$98.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-06724-21 Categories: ,
Guaranteed Safe Checkout

Is Your Workhorse Van Suddenly Unreliable?

As a mechanic with over two decades of experience, I know that for Savana 2500 owners, downtime isn’t just an inconvenienceโ€”it’s lost money. When the heart of your van’s electronics, the Powertrain Control Module (PCM), starts to fail, you’ll see symptoms that can bring your work to a halt. Maybe it’s a persistent Check Engine Light that won’t go away, rough idling, poor fuel economy, or the dreaded no-start condition. These are classic signs that the PCM is no longer managing the engine and transmission correctly.

A faulty PCM can be frustrating to diagnose. I’ve seen countless work vans come into my shop where owners have replaced sensors and other parts, only to find the core problem was the engine computer itself. This isn’t just a part; it’s the brain of your operation, and when it’s compromised, nothing else works as it should.

The Direct-Fit Solution: A VIN-Programmed 2003 Savana 2500 PCM

This is the definitive solution to get your van back on the road and earning its keep. We provide a replacement Powertrain Control Module, part number 12570557, that is professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN). This isn’t a generic, one-size-fits-all part. It’s a precise component prepared for your exact vehicle configuration.

  • โœ” VIN Programmed for Your Vehicle: We flash the module with the latest GM-approved software for your specific 2003 Savana 2500. This ensures all systems, from the engine to the transmission, communicate flawlessly.
  • โœ” No Dealer Visit Required: Because the module arrives programmed, you skip the expensive trip to the dealership for flashing and calibration. This saves you both time and money.
  • โœ” Resolves Common Failure Points: Effectively addresses issues like false trouble codes, erratic engine performance, harsh shifting, and intermittent stalling.
  • โœ” Restores Original Performance: By using the correct factory software, this module helps restore the original fuel efficiency, emissions compliance, and power delivery your van had when it left the factory.

Expert Pro Tip: Check Your Connectors First!

Before you condemn your old PCM, take a moment to inspect the electrical connectors that plug into it. On these Savana vans, the PCM is located in the left rear of the engine compartment where it’s exposed to heat and moisture. Over 20 years, it’s common for the pins and sockets to develop a green, powdery corrosion. This corrosion creates resistance and can mimic the symptoms of a failed module. Unplug the connectors (with the battery disconnected!) and clean them thoroughly with a dedicated electronics cleaner and a small brush. Sometimes, this simple step is all that’s needed. If the problem persists, you can be confident the module itself is the issue.

Simple Installation to Get You Back to Work

Installing your new 2003 Savana 2500 PCM is a straightforward process that a confident DIYer or any professional mechanic can complete quickly. No special tools are required.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. Locate the Module: On your 2003 Savana 2500, the PCM is located in the left rear of the engine compartment.
  3. Disconnect the Harnesses: Carefully release the locking tabs on the electrical connectors and unplug them from the old module. Inspect them for any damage or corrosion.
  4. Remove the Old PCM: Unbolt the mounting hardware holding the old module in place and remove it from the vehicle.
  5. Install the New PCM: Mount your new, pre-programmed module in the same location and secure it with the original hardware.
  6. Reconnect Everything: Plug the electrical harnesses firmly into the new PCM, ensuring the locking tabs click into place. Reconnect the negative battery terminal.
  7. Final Steps: In some cases, a security relearn procedure may be necessary, which can typically be done by cycling the key. Your van is now ready to start.

Guaranteed Compatibility

This module is a direct replacement for a wide range of GM vehicles from this era. Please verify that your vehicle and options are listed below. This part is compatible with the following service numbers: 12581565, 8125815650, 12570557, 12570558, 12576106, 12576869, 12578127, 8125781270, 88864822, 89017733.

This part will fit these makes and models with these options:

  • 2003-2004 Cadillac CTS (Base, ID 12581565)
  • 2004 Chevrolet Corvette (ID 12581565)
  • 2003 Chevrolet Avalanche 2500
  • 2003 Chevrolet Blazer S10 / GMC Jimmy S15
  • 2003 Chevrolet Express & GMC Savana 1500/2500/3500 Vans
  • 2003 Chevrolet S10 / GMC Sonoma (4.3L)
  • 2003 Chevrolet Silverado & GMC Sierra 1500 (4.3L)
  • 2003 Chevrolet Silverado & GMC Sierra 2500/3500 (Gasoline, 8.1L)
  • 2003 Chevrolet Suburban 2500 / GMC Yukon XL 2500 (8.1L)
  • 2003 Chevrolet Astro / GMC Safari

After your purchase, simply reply to our confirmation email with your VIN. We’ll handle the programming and ship a module that’s ready to install, getting you back on the job with confidence.

Conditions & Options

Programmed to your VIN GM: 12576106

Genuine OEM

Yes

MPN

12570557

Interchange part number

Condition

Refurbished

Model

SAVANA 2500 VAN

Year

2003

Brand

GM

Manufacturer Part Number

, , , , , , , , ,

GTIN

Does not apply

Scroll to Top