2003-2007 Silverado 2500 BCM Body Control Module 15198116

Restore Your Truck’s Electronics Instantly!

Fix frustrating electrical problems with this VIN-programmed Body Control Module. It’s a direct, plug-and-play solution for non-working lights, locks, and windows on your 2003-2007 GM truck or SUV. No dealer visit required. Order today to get your vehicle back to 100%!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01130-268 Categories: ,
Guaranteed Safe Checkout

Is Your GM Truck or SUV Plagued by Electrical Gremlins?

If you’re dealing with baffling electrical issues in your 2003-2007 GM truck or SUV, a failing Body Control Module (BCM) is the likely culprit. The BCM is the central command center for your vehicle’s body electronics, managing everything from your power windows and door locks to the interior lights and HVAC system. When it starts to fail, it can cause a cascade of frustrating and seemingly unrelated problems. This OEM-quality replacement BCM, part number 15198116, is the definitive solution to restore your vehicle’s electronic systems to perfect working order.

Expert Pro Tip: Before you begin the installation, always disconnect the negative terminal of your vehicle’s battery. This not only prevents accidental electrical shorts but also helps the vehicle’s systems perform a hard reset, which can clear out residual fault codes when the new, programmed module is connected.

Common Symptoms of a Failing BCM

A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, it’s a strong indicator that your module needs replacement:

  • ✔ Erratic or non-functional power windows, door locks, or mirrors.
  • ✔ Interior or exterior lights that won’t turn on or off, or that flicker randomly.
  • ✔ The security system acting up, causing a no-start condition or false alarms.
  • ✔ HVAC controls that are unresponsive or a blower motor that works intermittently.
  • ✔ An airbag warning light on the dash, often accompanied by diagnostic trouble codes (DTCs) like B1001.
  • ✔ Unexplained battery drain when the vehicle is turned off.

The Plug-and-Play Solution: Your Pre-Programmed 2003-2007 Silverado 2500 BCM

Forget expensive trips to the dealership for programming. We take the hassle out of the repair by pre-programming this BCM directly to your vehicle’s VIN before it ships. This ensures that it communicates flawlessly with your truck’s other electronic modules right out of the box. Simply install it, and you’re ready to go. This module is a direct replacement for a wide range of part numbers, including 15116066, 15136225, 15198116, and 15257043, among others. It’s the perfect fit for a huge variety of GM vehicles, including the Chevrolet Silverado, Tahoe, Suburban, GMC Sierra, Yukon, Cadillac Escalade, and Hummer H2.

Installation and Post-Install Considerations

Installation is straightforward for the average DIYer and typically takes less than 15 minutes. The BCM is usually located under the driver’s side dashboard, near the steering column. While our VIN programming handles the primary setup, some vehicles may require a ‘Setup SDM Primary Key in BCM’ procedure if the airbag light remains illuminated after installation. This procedure syncs the new BCM with the airbag system and requires a professional-grade scan tool. In some cases, a Brake Pedal Position Relearn may also be necessary. There is no core charge, so you can keep your old part without any hassle.

Frequently Asked Questions

What exactly does this Body Control Module do?

The BCM acts as the brain for your vehicle’s body accessories. It controls non-engine related functions like your lights, power windows, door locks, security system, wipers, and climate controls.

Do I need a dealer to program this BCM?

No. This BCM comes pre-programmed to your vehicle’s specific VIN. This makes it a true plug-and-play solution, saving you time and the high cost of dealership programming.

Is this part difficult to install myself?

Installation is generally simple. The BCM is located under the steering column and is held in place by a few clips or bolts. Most people can swap it out in under 15 minutes with basic hand tools.

What if my airbag light is on after I install the new BCM?

If the airbag light stays on, it means the new BCM needs to be synced with the airbag’s Sensing and Diagnostic Module (SDM). This requires a ‘Setup SDM Primary Key’ procedure, which can be performed by a mechanic with a professional diagnostic tool.

Will this fit my 2007 Silverado ‘Classic’ model?

Yes, this BCM is compatible with the 2007 ‘Classic’ body style trucks (the ones with the creased door skin), as well as the 2003-2006 models. It covers a wide range of GM trucks and SUVs from this era.

Conditions & Options

Programmed to your VIN GM: 15116066

Year
Genuine OEM

Yes

MPN

15198116

Interchange part number

Condition

Refurbished

PartNumber

591

Model

Silverado 2500 Pickup

Make

Year

2006

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , , , ,

Scroll to Top