Restore Full Functionality to Your GM Truck or Van
Are you battling frustrating electrical gremlins in your Silverado, Sierra, Express, or Savana? A failing Body Control Module (BCM) is often the culprit behind a host of perplexing issues, from malfunctioning power windows and locks to erratic instrument cluster behavior and security system faults. This pre-programmed Body Control Module is the direct-fit, reliable solution to get your vehicle’s essential electronic features working like new again.
Is Your Vehicle Showing These BCM Failure Symptoms?
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Flickering or dead interior lights and dashboard illumination.
- ✔ The security system light stays on, or the alarm randomly triggers.
- ✔ Horn not working or sounding unexpectedly.
- ✔ Wipers behaving erratically or not parking in the correct position.
- ✔ “Service 4WD” or other warning messages appearing without a clear cause.
- ✔ A persistent battery drain that kills your battery overnight.
The Simple Solution: A Plug-and-Play GM BCM Replacement
Don’t let a faulty module keep your truck or van off the road. We make the repair process straightforward. Simply provide your vehicle’s VIN during checkout, and our technicians will program this module with the latest GM software specific to your vehicle’s configuration. This ensures a seamless installation process, eliminating the need for expensive dealership programming. This is the most efficient way to get a reliable GM BCM Replacement and restore your vehicle’s electronic systems.
Post-Installation Information
While this module is programmed for your vehicle, some models may require a simple relearn procedure after installation to sync with other onboard systems. These can typically be performed by a qualified technician with a professional scan tool.
- Airbag System Sync: If your airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the systems.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor might be necessary to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for guidance specific to your vehicle.
This BCM is a direct replacement for the following part numbers:
15167329, 15194169, 15747545, 15136224, 15116065, 15198115, 15136876, 10367689
Frequently Asked Questions
What does a Body Control Module (BCM) do?
The BCM acts as the central computer for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, lights, wipers, security system, and the instrument cluster.
Is this part difficult to install?
The physical installation is typically straightforward, involving unplugging the old module and plugging in the new one. It’s usually located under the steering column or in the center dash. However, some vehicles may require post-installation relearn procedures as noted above.
Why do you need my VIN?
Your Vehicle Identification Number (VIN) allows us to program the BCM with the exact software and settings for your truck or van’s specific options. This makes the installation as close to plug-and-play as possible.
Do I have to send my old BCM back?
No, there is no core charge for this part. You can keep your original module.
Will this fix my specific electrical problem?
This module will resolve issues directly caused by a failing BCM. If you are experiencing any of the symptoms listed above, a faulty BCM is the most likely cause. Proper vehicle diagnosis is always recommended.