2003-2006 Yukon XL BCM Body Control Module 15198116

Solve Your Yukon’s Electrical Problems

Fix failing power windows, locks, and HVAC with this VIN-programmed Body Control Module. It’s a direct-fit, plug-and-play solution for 2003-2006 GM trucks and SUVs, eliminating the need for dealer programming. Order today to restore your vehicle’s functions!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01130-285 Categories: ,
Guaranteed Safe Checkout

Are you battling frustrating electrical issues in your GMC Yukon XL, Chevrolet Tahoe, or Silverado? When power windows, door locks, interior lights, or the HVAC system start acting erratically, the culprit is often a failing Body Control Module (BCM). This VIN-programmed BCM, part number 15198116, is the definitive solution to restore full electronic functionality to your GM truck or SUV without requiring a costly trip to the dealership for programming.

From the Diagnostic Bay

We had a 2005 Silverado in the shop where the owner had already replaced the blower motor and resistor twice, but the HVAC controls still worked intermittently. After a quick scan, we saw communication fault codes pointing to the BCM. Instead of continuing to replace parts, we installed a VIN-programmed BCM. The HVAC system immediately returned to normal, and all the other strange electrical gremlins disappeared. It’s a classic case where the central ‘brain’ was the issue, not the individual components.

Symptoms of a Failing 2003-2006 Yukon XL BCM

A faulty BCM can manifest in numerous ways, often making diagnosis difficult. If you’re experiencing any of the following, this module is likely the solution you need:

  • ✔ Intermittent or non-functional power windows, door locks, or mirrors.
  • ✔ Unresponsive HVAC controls or a blower motor that won’t turn on or off.
  • ✔ An airbag warning light that stays illuminated, often with a B1001 diagnostic trouble code.
  • ✔ Security system malfunctions, including random alarm activation or a no-start condition where the engine won’t crank.
  • ✔ Erratic interior or exterior lighting behavior.
  • ✔ A cluster of seemingly unrelated electrical communication DTCs.

Plug-and-Play Solution for Your GM Vehicle

This module is not just a replacement part; it’s a complete, ready-to-install solution. We pre-program the BCM to your vehicle’s specific VIN, ensuring it communicates flawlessly with the other modules in your truck, like the ECU and SDM (airbag module). This critical step bypasses the need for expensive dealer-only tools and procedures. Built to strict OEM standards, this BCM for your 2003-2006 Yukon XL BCM ensures long-term reliability and performance.

Installation and Post-Install Notes

Installation is straightforward. The BCM is typically located under the driver’s side dashboard, near the steering column. Simply disconnect the battery, unbolt the original module, disconnect the wiring harnesses, and install the new one in its place. While our VIN programming handles the primary setup, some vehicles may require a ‘Setup SDM Primary Key in BCM’ procedure with a professional scan tool if the airbag light remains on. This syncs the new BCM with your vehicle’s existing airbag system. In some cases, a brake pedal position sensor relearn may also be necessary.

Frequently Asked Questions

What does the BCM do on a 2004 GMC Yukon XL?

The Body Control Module acts as the central hub for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, security system, interior and exterior lights, wipers, and the HVAC system.

Is this BCM truly plug-and-play?

Yes. By providing your vehicle’s VIN during checkout, we program the module specifically for your truck or SUV. This means no additional programming is required for most functions upon installation.

Why is my airbag light on after installing the new BCM?

This can happen because the new BCM needs to be electronically ‘introduced’ to your vehicle’s Sensing and Diagnostic Module (SDM). A technician with a capable scan tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.

Do I need to send my old part back?

No, there is no core charge for this part. You can keep your original module.

Will this fix a no-start problem?

If your no-start issue is caused by the factory security system (Passlock/VATS) being controlled by a faulty BCM, then yes, this programmed module can resolve the problem by restoring proper security communication.

Is this compatible with other part numbers?

Yes, this module is a direct replacement for a wide range of part numbers, including 15116066, 15136225, 15137393, 10383536, and more. It fits many 2002-2007 GM trucks and SUVs.

Conditions & Options

Programmed to your VIN GM: 15116066

Year
Genuine OEM

Yes

MPN

15198116

Interchange part number

Condition

Refurbished

PartNumber

591

Model

Yukon Xl 1500

Make

Year

2006

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , , , ,

Scroll to Top