2003-2006 Escalade ESV PCM 12589463 Programmed to Your VIN

Restore Your Escalade ESV’s Performance!

Fix check engine lights, poor running conditions, and no-start issues with this pre-programmed PCM for your 2003-2006 Escalade ESV. We flash it to your VIN with the latest GM software for a simple, plug-and-play installation. No dealer trip needed! Get your pre-programmed PCM and fix your truck today!

$114.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-07633-169 Categories: ,
Guaranteed Safe Checkout

Is Your Escalade ESV Running Rough, Stalling, or Showing a Check Engine Light?

A faulty Powertrain Control Module (PCM) is often the hidden culprit behind frustrating and hard-to-diagnose engine problems. As a technician with over 20 years of experience, I’ve seen countless GM trucks and SUVs, including the Escalade ESV, sidelined by a failing engine computer. Symptoms can range from a simple check engine light to poor fuel economy, erratic shifting, or even a no-start condition that leaves you stranded. Don’t let a bad module compromise the performance and reliability of your luxury SUV.

The Direct Solution: A VIN-Programmed PCM

This is a direct-replacement PCM, service number 12589463, for your 2003-2006 Cadillac Escalade ESV. The critical difference with our service is that we professionally program the module to your vehicle’s specific Vehicle Identification Number (VIN) before it ships. This means it arrives loaded with the latest GM factory software updates, ensuring optimal performance and compatibility right out of the box. You get a reliable fix without the time and expense of a dealership visit for programming.

Key Benefits of This Programmed 2003-2006 Escalade ESV PCM:

  • โœ” VIN-Specific Programming: We flash the module with your exact VIN, ensuring it communicates perfectly with your vehicle’s other systems.
  • โœ” Latest GM Software: Your PCM will have all the latest drivability and performance updates from General Motors.
  • โœ” Plug-and-Play Installation: No dealership visit or special tools are required. Just install the module and perform the security relearn procedure.
  • โœ” Solves Common Issues: A reliable fix for issues like false misfire codes (P0300-P0308), harsh shifting, communication errors, and no-start problems.
  • โœ” Broad Compatibility: This module also fits a wide range of other GM trucks and SUVs from the same era. It is a direct replacement for service numbers 89017750, 12582605, 12602802, 89017734, and 28042802.

Real-World Diagnostic Story

“A customer’s 2005 Escalade ESV came into my shop last month with a persistent P0306 code (Cylinder 6 Misfire) and a rough idle. They had already replaced the spark plug, ignition coil, and even the fuel injector for that cylinder, but the problem wouldn’t go away. After confirming the new parts were good, my diagnostic scanner showed the command signal from the PCM to the coil was weak. We installed one of these VIN-programmed PCMs, performed the security relearn, and the misfire was gone instantly. The internal coil driver in the original module had failedโ€”a very common issue I’ve diagnosed on hundreds of these GM platforms.”

Plug-and-Play Installation: No Dealer Visit Required

Installing your new PCM is straightforward. On most of these GM trucks, the module is located in the engine bay on the driver’s side, near or under the battery tray. Follow these simple steps to get your vehicle back to factory-spec performance.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and secure it away from the post.
  2. Locate the PCM: Find the existing module. You may need to remove a plastic cover or the battery to gain access.
  3. Disconnect Connectors: Carefully unlatch and remove the wiring harness connectors from the old PCM. Inspect the pins for any corrosion or damage and clean them if necessary.
  4. Swap the Module: Unbolt the old PCM from its mounting bracket and install the new one in its place.
  5. Reconnect Everything: Securely plug the wiring harnesses into your new PCM until they click. Reconnect the negative battery terminal.
  6. Perform Security Relearn: You will need to perform a simple security relearn procedure (often called a ‘key-on’ relearn) so the vehicle recognizes the new module. This typically involves turning the key to the ‘ON’ position for 10-15 minutes, then off, and repeating two more times. This allows the anti-theft system to sync with the new PCM.

After your purchase, simply send us a message with your vehicle’s 17-digit VIN. We’ll handle the programming and ship your ready-to-install PCM, getting you back on the road quickly and confidently.

MPN

12589463

Conditions & Options

12589463

Genuine OEM

Yes

Condition

Refurbished

PartNumber

590

Model

Escalade Esv

Make

Year

2003 – 2006

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , ,

Interchange part number

Scroll to Top