2002 Tahoe BCM Body Control Module DKAK Programmed to Your VIN

Fix Your GM’s Electrical Gremlins

Tired of unpredictable lights, locks, or a stubborn security system in your 2002 Tahoe? This Body Control Module (BCM) is your plug-and-play solution. We program it to your vehicle’s VIN with the latest GM software before shipping, eliminating the need for a costly dealership visit. It’s a direct-fit replacement with no core charge required. Order today and restore your truck’s proper function!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-06642-99 Categories: ,
Guaranteed Safe Checkout

Restore Your GM Truck’s Electrical System with a Reliable BCM

Are you dealing with baffling electrical problems in your 2002 Chevrolet Tahoe or other GM vehicle? Intermittent power windows, a security light that won’t turn off, or a dashboard that lights up like a Christmas tree are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can cause chaos. Over my 20 years in the shop, I’ve seen these modules fail in countless ways, often leading to expensive misdiagnoses. This replacement BCM is the direct, dependable solution you need.

We take the guesswork and high dealership costs out of the equation. Simply provide your vehicle’s VIN during checkout, and our technicians will program this module with the latest GM-certified software specifically for your truck or SUV. It arrives at your door ready for installation, saving you a trip to the dealer and their programming fees. This is the most straightforward way to get your vehicle back to 100% functionality.

Case Study: A Tricky Diagnosis

I remember a 2002 Silverado 1500 that was towed into my bay. The owner had already replaced the battery and starter, but the truck was still a no-crank, no-start. The security light was flashing on the dash, a key indicator. Instead of chasing grounds or replacing more parts, I went straight for the BCM. A quick scan confirmed communication errors (U1000). The BCM’s internal security logic had failed, preventing the powertrain from getting the ‘all clear’ signal to start. We installed a VIN-programmed module just like this one, and the truck fired up on the first try. It’s a textbook example of how a failing 2002 Tahoe BCM or its equivalent can mimic other, more expensive problems.

Is Your GM Vehicle Showing These Symptoms?

  • ✔ Power windows, door locks, or interior lights working erratically or not at all.
  • ✔ The security or anti-theft light stays on, preventing the engine from starting.
  • ✔ Inaccurate or non-functional gauges on the instrument cluster.
  • ✔ The radio or climate control system behaves unpredictably.
  • ✔ Diagnostic trouble codes (DTCs) related to communication loss, such as U1000, or various B-codes (Body codes).
  • ✔ The horn honking randomly or the alarm system triggering for no reason.

A Straightforward Guide to Installation

  1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
  2. ✔ Locate the BCM: On most compatible trucks and SUVs like the Tahoe, Yukon, and Silverado, the BCM is located under the driver’s side of the dashboard, near the steering column. On vans like the Astro and Safari, it is often behind the center dash area.
  3. ✔ Remove the Old Module: Carefully unplug the electrical connectors. They have locking tabs that need to be depressed. Then, unbolt or unclip the module from its mounting bracket.
  4. ✔ Install the New BCM: Mount your new, pre-programmed module in the same location and securely reconnect all electrical harnesses. You should hear a ‘click’ as they lock into place.
  5. ✔ Reconnect Power: Reattach the negative battery terminal.
  6. ✔ Perform Final Checks: Start the vehicle and test all body functions (lights, locks, windows, radio). Note the post-installation procedures below, as some may be required.

Important Post-Installation Steps

While this module is programmed to your VIN, your vehicle’s other computers may need to be re-synced. This is a normal part of the process.

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light operation and to prevent issues with the traction control system.

Disclaimer: Vehicle systems vary. Always have a factory service manual available for your specific model or consult with a qualified mechanic if you are unsure about any step.

Verified Vehicle Compatibility

This BCM is a direct replacement for part numbers 15063578, 15081796, 15095334, 19208537, DKAK, and DPNU. It is guaranteed to fit the following GM models:

  • AVALANCHE 1500 02 (4×2)
  • ASTRO 02-05
  • BLAZER S10 02-05
  • ESCALADE 02 (4×2)
  • JIMMY S15 02-05
  • S10/S15/SONOMA 02-04
  • SAFARI (GMC) 02-05
  • SIERRA 1500/2500/3500 PICKUP 02
  • SIERRA DENALI 02
  • SILVERADO 1500/2500/3500 PICKUP 02
  • SUBURBAN 1500/2500 02
  • TAHOE 02 (4×2)
  • YUKON 02 (4×2)
  • YUKON XL 1500/2500 02

Frequently Asked Questions

What exactly does a Body Control Module do?

The BCM acts as the brain for your vehicle’s body electronics. It controls non-engine related functions like the power windows, interior and exterior lighting, door locks, security system, radio, and climate controls. When it fails, these systems can become erratic.

Why do you need my VIN to program the BCM?

Your Vehicle Identification Number (VIN) contains specific information about the options your vehicle was built with (e.g., power seats, keyless entry, etc.). We use the VIN to load the exact correct software from GM, ensuring all features work perfectly once the new 2002 Tahoe BCM is installed.

Is this a difficult part for a DIYer to install?

For most DIYers with basic tools, this is a very manageable job. The primary challenge is often just accessing the module under the dashboard. Since we handle the programming, the physical swap is straightforward and there’s no need for special computer equipment unless a relearn procedure is required.

What if my airbag light comes on after I install it?

This is a known possibility. It means the new BCM needs to be electronically ‘introduced’ to the vehicle’s airbag computer (SDM). A repair shop with a professional-grade bidirectional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure in a few minutes to resolve this.

Do I need to send my old BCM back?

No. This purchase comes with no core charge. You can keep your old module, which can be helpful if you ever need to reference its original part number.

MPN

dkak

Genuine OEM

Yes

Interchange part number

Condition

Refurbished

Model

TAHOE

Make

Year

2002

Brand

GM

Manufacturer Part Number

Scroll to Top