2002 Dodge Durango ECM 56040616AJ | Programmed to Your VIN

Get Your Dependable Durango Back on the Road

Tired of unpredictable stalling or a check engine light that won’t quit? Restore the reliability and confidence you need with our pre-programmed Engine Control Module. It’s designed for a perfect fit in your 2002 Dodge Durango 4.7L, arriving ready to install right out of the box. Stop worrying and start driving again. Add to cart now!

$139.95

+11.99 USPS Priority Shipping

Out of stock

Guaranteed Safe Checkout

Is Your Durango Giving You Headaches?

There’s nothing more frustrating than a vehicle you can’t rely on. If your 2002 Dodge Durango is suffering from erratic behavior like stalling at stoplights, rough idling, a persistent check engine light, or worse, a complete failure to start, the root cause is often a failing Engine Control Module (ECM). This isn’t just an inconvenience; it’s a critical issue that compromises your vehicle’s performance and safety. It’s time to stop guessing and install a solution that brings back the dependable performance you need.

Common Symptoms & Your Solution

A faulty ECM can manifest in numerous ways, often mimicking other problems and leading to costly, incorrect repairs. If you’re experiencing any of the following, our pre-programmed engine computer is the definitive fix:

  • Unexplained Check Engine Light (CEL)
  • Engine stalling or cutting out while driving
  • Poor fuel economy and engine performance
  • Harsh or incorrect automatic transmission shifting
  • Communication errors with diagnostic scan tools
  • Complete no-start condition where the engine cranks but won’t fire

This module is the brain of your Durango’s 4.7L engine. By replacing your faulty unit with our precisely configured 2002 Dodge Durango ECM 56040616AJ, you are restoring the core of your vehicle’s engine management system to perfect working order.

Features & Benefits

  • ✔ Ready to Install, Right Out of the Box: This module arrives fully programmed to your vehicle’s specific VIN and mileage. No extra steps, no trips to the dealer for expensive flashing.
  • ✔ True Plug & Play Installation: Simply disconnect the old module and connect this one. It’s a straightforward process that gets you back on the road quickly and without hassle.
  • ✔ Guaranteed Compatibility: This unit is a direct replacement for part numbers 56040616AC, 56040616AG, and 56040616AJ, ensuring a perfect match for your vehicle’s system.
  • ✔ Solve Frustrating Electrical Gremlins: Put an end to confusing diagnostic codes and unpredictable engine behavior by replacing the source of the problem.
  • ✔ Drive with Renewed Confidence: This unit is backed by our one-year replacement warranty. Enjoy the peace of mind that comes from a reliable repair.

An Expert’s Note on the 32-Tooth Tone Ring

From over 20 years in the shop, I’ve seen countless Durango owners chase a no-start issue after installing the wrong ECM. The 2002 4.7L engine with Federal emissions uses a very specific 32-tooth crankshaft tone ring. The ECM must be calibrated for this exact signal. Using a module designed for a different system (like the later 16-tooth ring) will result in a crank-no-start condition every single time. We verify that this 2002 Dodge Durango ECM 56040616AJ is correctly configured for your vehicle’s 32-tooth system, eliminating that potential nightmare and ensuring it works perfectly from the moment you plug it in.

Frequently Asked Questions

Do I need to have a dealer program this module?

Absolutely not. We handle all the programming for you before shipment. Just provide your VIN and current mileage during checkout, and the module will arrive ready for a simple, Plug & Play installation.

Where is the ECM located on my 2002 Durango?

You can find the Engine Control Module in the engine bay, mounted on the passenger-side fender well. It will have three large electrical connectors attached to it.

My original part number is 56040616AG. Will this part work?

Yes. This module is a direct, fully compatible replacement for part numbers ending in AC, AG, and AJ. The last two letters often denote minor revisions, but the core function and programming are identical for your vehicle.

What information do you need from me?

To ensure a perfect Plug & Play experience, we require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can provide this information during the checkout process.

What if I have questions during installation?

Our team of experienced technicians is here to help. While installation is straightforward, we’re available to provide support and answer any questions you may have about your new 2002 Dodge Durango ECM 56040616AJ.

What kind of warranty is included?

This unit is backed by our one-year replacement warranty., giving you confidence and security in your purchase.

Condition

Refurbished

Year

Genuine OEM

Yes

MPN

56040616AJ

Interchange part number

Model

DURANGO

Year

2002

Brand

Chrysler

Manufacturer Part Number

, ,

Scroll to Top