Restore Peak Performance to Your 2.7L Engine
Is your 2001 Dodge Intrepid or Chrysler Concorde suffering from frustrating and unpredictable issues? Symptoms like stalling, rough idling, a persistent Check Engine Light, or a complete no-start condition often point directly to a failing Engine Control Module (ECM). This vital component is the brain of your vehicle’s engine, and when it malfunctions, it can cause a cascade of problems that are difficult to diagnose. Don’t let a faulty computer keep you off the road. This replacement Engine Control Module, part number 04896146AD, is the definitive solution to get your vehicle running smoothly and reliably again.
We take the guesswork and high costs out of the repair process. Unlike a generic part from a salvage yard or a costly unit from the dealership, this module arrives at your doorstep fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This means it is a true plug-and-play solution. There is absolutely no need for additional programming, key relearning, or expensive trips to a mechanic with specialized tools. You can perform the installation yourself in your own driveway, saving time and hundreds of dollars in labor and programming fees.
From the Diagnostic Bay
I once had a 2001 Concorde 2.7L come into the shop that had its owner chasing ghosts for weeks. The car would run fine for a day, then suddenly refuse to start. The owner had already replaced the crank sensor, cam sensor, and even the fuel pump based on various forum suggestions. When we hooked up our professional scanner, we saw intermittent communication loss with the PCM. A quick check of the wiring confirmed the harness was good. The culprit was a failing ECM that was intermittently shorting internally. We installed one of our pre-programmed units, and the car fired up instantly and ran perfectly. It’s a classic case where replacing the ‘brain’ was the only real fix, saving the customer from throwing more money at perfectly good sensors.
Common Symptoms of a Failing 2001 Intrepid Engine Computer
If you’re experiencing any of the following issues with your 2.7L Intrepid or Concorde, a faulty ECM is a highly probable cause. A failing computer can mimic many other component failures, so it’s crucial to consider it as the root of the problem.
- âś” Check Engine Light is on with various, often inconsistent, trouble codes.
- âś” Engine cranks but refuses to start.
- âś” Stalling or shutting off unexpectedly while driving.
- âś” Noticeable decrease in fuel economy.
- âś” Rough or erratic engine idle.
- âś” Hesitation or stumbling during acceleration.
- âś” Automatic transmission shifting issues or harsh shifts.
- âś” Loss of communication with diagnostic scan tools.
Plug-and-Play Installation for a Hassle-Free Repair
This engine computer is specifically prepared for your 2001 Dodge Intrepid or Chrysler Concorde equipped with the 2.7L engine. The programming is handled by our expert technicians before the unit is shipped, ensuring it integrates seamlessly with your vehicle’s existing systems, including the anti-theft (SKIM) key. The process is straightforward: simply provide your VIN upon checkout, and we handle the rest. The module you receive will be ready for immediate installation, making this one of the easiest and most effective repairs you can perform to solve complex electronic issues.
This module is a direct replacement for a wide range of part numbers, including: 4896146, 04896146, 4896146AA, 4896146AB, 4896146AC, 4896146AD, 04896146AA, 04896146AB, 04896146AC, and 04896146AD. By ordering from us, you get the right part, with the right software, the first time.
Frequently Asked Questions
Do I need to have this computer programmed by a dealer?
No. This engine computer comes fully programmed to your vehicle’s VIN. It is a plug-and-play installation, and no further programming or dealer intervention is required.
Where is the ECM located on my 2001 Intrepid or Concorde?
The Electronic Control Module (ECM) is located in the engine compartment on the driver’s side (LH side), near the front of the vehicle. It is a silver metal box with several large electrical connectors.
Will this fix my transmission shifting problems?
In many cases, yes. The engine computer works in conjunction with the transmission control module. A faulty ECM can send incorrect data, leading to poor shifting performance. If the root cause is the ECM, this part will resolve those issues.
Is this a difficult part to install myself?
The installation is straightforward for someone with basic mechanical skills. It involves disconnecting the battery, unplugging the electrical connectors from the old module, unbolting it, and then reversing the process with the new one. No special tools are needed.
What information do you need from me to program the module?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) to ensure the module is programmed correctly for your specific car and its features. Please provide this during the checkout process.